Fall Protection Anchors

Fall Protection Distributors LLC, brings you a revolutionary product allowing Homeowners, Building Owners, and Contractors to work safely on standing seam roofs without penetrating the panels. The Standing Seam Roof Anchor (SSRA1). The patented, Non-Penetrating design of the standing seam roof anchor is unlike anything currently available. Its the only certified component system for mounting just about anything to a standing seam roof. The interchangeable mount allows for attachment of devices...

The ultimate tool to get you safely from the ladder to the peak and back. Includes the main body constructed of high-grade aluminum capable of withstanding thousands of pounds of pulling force, an adjustable pitch-selection grid with an incremental range of 6/12 to 12/12 with pitches etched into the main body, two padded cross members to protect an existing surface material from damage and balance the user when transitioning on and off the ladder, four cross member holes to receive 5/16” lag...

For use on roofs from flat to 12/12 pitch, wood or metal. 5000 lb. anchor point. Fasteners included. Tested and approved for metal roofing applications, minimum 20 gauge metal or thicker, attached directly onto the surface. For metal installation: use (16) screws (8 per side), 6 in center column of fastener installation holes, in 1 hole left of center and 1 hole right of center. Guardian recommends HILTI Kwik-Pro self-drilling screws. Features: Designed for temporary use on wood rooftopsFits...

The Guardian Fall Protection Two-Way Universal Standing Seam Clamp is lightweight, reusable, and easy-to-use. This product possesses an all steel construction with zinc electroplate finish making it very durable. The clamp also features a unique, reversible design that allows for seams up to 1-inch wide. The MR-24, VSR or similar profiles can be covered with one clamp. Features: Fits most brands and styles of standing seam roofs and is completely reusableUnique reversible design allows for...

The Guardian Fall Protection Bull Ring Anchors are suitable for personal fall arrest, restraint, or work positioning applications. For all applications, the worker weight capacity range (including all clothing, tools, and equipment) is 130 to 310 pounds. The anchor itself is constructed of 100% zinc-plated steel. Substrate must be roof truss or support beam that is minimum of 3" thick CDX or better. All fasteners (use either six 16d, 3" long 8 gauge nails or three 1/4" x 3" zinc-plated steel...

Most roof anchor installations require the removal of shingles to install. This can pose a problem, especially on older roofs with brittle shingles. No need to remove the ridge cap to install fall arrest anchors because this flashing allows you to install anchors directly over your existing roofing material. The D- Minus anchor can be mounted directly over existing asphalt shingle roofs without removing any shingles.  To cover the anchor and fasteners and protect it from the elements we...

Fall Arrest rating for three workers and Fall Restraint for two. For Concrete applications, only 2 Workers for Fall Arrest and 2 for Fall Restraint. With the new job box and material rack, you will see safe and productive increases for your leading edge work. Includes Flat-Free Tires, 20 cf Job Box (w/double door opening from the center) and a Material Rack. Additional 12 cf job box and Raptor Alert available as an option. The TriRex was redesigned in 2011 from the ground up, based on customer...

The Guardian Fall Protection CB Anchor Series are perhaps the most proven fall protection anchors on the market. CB Anchors are compatible for installation onto wood, steel, and concrete substrates (fasteners are included for wood and steel applications). The anchor post functions to extend though roofing so that it is accessible both during and after roof construction, and is compatible for use with SRLs, vertical lifelines, horizontal lifelines, and shock absorbing lanyards. CB Anchors are...

The Guardian Fall Protection 00250 Standing Seam Roof Clamp is designed to be used with SRL's up to 50 ft. in length. It functions to attach to metal roof seams spaced from 24 to 36 in. apart, while allowing the attached SRL to rotate a full 360 degrees  * Can be used up to 65 ft. in length if used in combination with the retractable swivel adapter * Features: Reusable AnchorEasy to install360 degree rotationCompatible with Guardian SRL's up to 50 ft. Tech Data: Worker Capacity Range: 130...

Parapet Anchor No tools required with simple clamp-on non-penetrating installationAdjusts to fit parapets from 1/2" to 15" thick and having a minimum height of 9"Protective rubber pads limit marring of parapet surfacesIncludes primary connection D-ring for fall arrest, restraint and suspension applicationsAlso includes additional D-ring for optional tie-back useMeets OSHA 1926.502 regulationsPowder coated steel constructionProtective foot pads on main body and final adjustment clampInstalls on...

The SSRA2 Roof Jack Adapters are part of the Standing Seam Roof Anchor system. They allow you to mount 2 in. x 10 in. walk-boards to over 500 standing seam roof panels. The SSRA2 adapter plate simply mounts on top of a Standing Seam Roof Anchor (SSRA1, available separately) that has had the D-ring removed. Constructed of solid 6061-T6 aluminum with stainless steel hardware. The adjustable height stabilizer legs provide a steady mounting bracket on hundreds of different seams. *Brackets should...

The Guardian Fall Protection "Premium Cross Arm Straps" are twice as durable with dual enforced webbing and heavy duty stitching. The heavy duty wear pad protects the structural webbing against abrasion and snags. Each strap features a large D-ring and standard size D-ring for pass-thru, which increases the versatility of length adjustment. To shorten the anchorage connector, simply wrap the webbing around the anchorage and pass through the large D-ring. Features: Twice as durable with dual...

The Guardian Fall Protection Cross Arm Strap is a reusable anchorage connector that can be used in a variety of fall protection applications. To use, loop over a steel support beam or other compatible anchor, and pull the small D-ring through the pass-through loop (or second, larger D-ring). Connect to the Cross Arm Strap D-ring with a compatible lanyard or SRL, and you are ready to work.Feature: Easy to installPass-through D-ring and loop modelsLightweight and durableMultiple lengths...

The PitchPro is a premier fall protection anchor designed for sloped-roof asphalt shingle construction. The PitchPro is the perfect solution for both new and existing construction, and its low-profile installation makes it an excellent choice for permanent applications. Its oversized connection point makes attaching and detaching easy and bind-free. Made from robust powder-coated steel, the PitchPro resists damage from repeated installations, and ensures the longest possible lifespan. Feat...

The D-Minus anchor is our most economical fall arrest anchor and is available in gray powder coated 11-gauge mild steel or 11-gauge 430 stainless steel. Installs with 6 factory supplied stainless steel spiral shank nails or an optional #12 screws. This anchor is specified for use on asphalt shingle roofing and is low profile making them difficult to notice on the roof. This anchor can be used for new construction, reroof or retrofitting onto existing roofs. In addition, this anchor can be used...

The Guardian Fall Protection Snappy Anchor is a disposable anchorage connector designed to fit a wide variety of wood roof pitches. The Snappy is convenient, easy to install and remove, and meets all applicable OSHA regulations. To use, simply adjust the Snappy to fit over selected roof ridge, then nail into roof truss using all fastener installation holes. Supplied with all necessary fasteners. Features:  Single UseCan be bent to fit any roof pitch Convenient and disposable Easy to...

The Guardian Fall Protection CB Anchor Series are perhaps the most proven fall protection anchors on the market. CB Anchors are compatible for installation onto wood, steel, and concrete substrates (fasteners are included for wood and steel applications). The anchor post functions to extend though roofing so that it is accessible both during and after roof construction, and is compatible for use with SRLs, vertical lifelines, horizontal lifelines, and shock absorbing lanyards. CB Anchors are...

Single D-ring, Permanent Roof Anchor with Stainless Steel Body; Fastens Under Shingles, Leaving D-ring Exposed for Attachment; 19" Including D-ring with 17" Nailing Surface. Features:  Designed for under-tile roof ridge or field installationFeatures 17" stainless steel nailing plate with 2" connecting D-ring.Includes 16D stainless steel nails for installation to wood roof structuresMeets OSHA 1926.502 regulations Please read and understand the manufacturer instructions before using this...

Safety Bar Temporary/Reusable Anchor The Safety Bar is a unique fall protection anchor for use while working with open truss situations. It spans 3 trusses and locks in securely with detent pins while gauging the trusses 24” on center. 2 users and tie off to the safety bar with the use of a shock absorbing lanyard or SRL’s. Our Safety Bar is the only product on the market for open framing fall protection and is used by framing crews across the country for OSHA compliance during the absolute...

The Moveable ARS Anchor follows the same design principles as our ARS Permanent Roof Anchors. This is designed for the framing tradesmen that need a quick, easy anchorage connector for their lanyards, lifelines or SRL’s. Made from 11-gauge steel that is powder coated. Comes with a 3/8” stainless steel detent pin with elastic tether. Heavy Duty 11-gauge steel construction2 models cover 2×4 trussesStainless Steel locking detent pinRated for OSHA Fall ArrestPowder Coated for Durability Please...

The RS-20 anchor is a permanent roof anchor designed specifically for tile, slate, wood and synthetic roofing materials. The 20” long strap allows you to adjust the reveal of the D-ring for your specific roofing material and the unique design of the anchor also allows you to physically bend the D-ring portion of the anchor up and over the tile or slate so that it lays flat on the surface. This permanent, low profile anchor comes with stainless steel attachment hardware and comprehensive...

The Guardian Fall Protection Halo Anchor is a temporary and reusable roof anchorage connector. It is composed of 1/4 inch thick steel, a zinc-plated forged alloy steel O-ring, and can support loads up to 5,000 pounds. It may be used in both Fall Arrest and Restraint applications, and is supplied with all necessary fasteners. FEATURES: Removable/Reusable 1/4" thick steel roof anchorComplete with zinc plated forged alloy steel O-ringNail or bolt into the roof member)Designed to be removable, it...

The Standing Seam Roof Anchor(SSRA1) is a revolutionary product allowing homeowners, building owners, and contractors to work safely on standing seam roofs without penetrating the panels. Engineered to revolutionize fall protection anchorage attachment on Standing Seam Roofs! The patented, non-penetrating design of this life-saving device is unlike anything currently available. It consists of a solid 6061-T6 aluminum body with 12 stainless steel set screws and 12 nylon tipped stainless steel...

For use on wood framed structures that can be mounted at the ridge or in the field. Can be installed with nails (supplied) or screws and used to connect your vertical lifeline, SRL or lanyard to for fall protection. Made from 11-gauge zinc coated steel. Replacement anchor for many fall protection kits/buckets found in the market today.Features:  Industry Standard Design with Hinged D-RingUse up to a 20/12 Pitch or Flat on the DeckRated for OSHA 5,000 pounds Fall ArrestInstall with Nails...

Double D-ring; Permanent Roof Anchor with Stainless Steel Body; Fastens Under Shingles, Leaving D-rings Exposed for Attachment; 17" Including D-rings with 12" Nailing Surface. Features: Designed for installation under roof ridge capFeatures 12" stainless steel nailing plate with 2-1/4" connecting D-rings.Includes 16D stainless steel nails for installation to wood roof structuresMeets OSHA 1926.502 regulations Please read and understand the manufacturer instructions before using this product. ...

The Parapet Anchor System can be used for the placement of guardrail uprights, single point tie-off, or in conjunction with a horizontal rope lifeline. This product meets OSHA standards for guardrail and anchor point purposes. This anchor system acts as a single point tie-off and also integrates a safety pin for secure set up and adjustment so that the parapet anchor can fit a wall from four inches (4") to twenty inches (20") in width. The product is reinforced for long life, rated for 5,000...

The Guardian Fall Protection "Premium Cross Arm Straps" are twice as durable with dual enforced webbing and heavy duty stitching. The heavy duty wear pad protects the structural webbing against abrasion and snags. Each strap features a large D-ring and standard size D-ring for pass-thru, which increases the versatility of length adjustment. To shorten the anchorage connector, simply wrap the webbing around the anchorage and pass through the large D-ring. FEATURES: Twice as durable with dual...

Mobile Fall Protection Systems are a great solution when there’s no place for workers to tie-off for fall protection! However, the mounting and positioning of self-retracting lifelines (SRL’s) on mobile fall protection carts is problematic. Problem #1: Currently, SRL’s are NOT being positioned according to manufacturer guidelines on mobile fall protection carts! According to DBI/Sala’s guidelines for SRL use in horizontal or near horizontal applications, “The SRL should be positioned on it’s...

The Guardian Fall Protection Ridge-It Anchor line is designed for permanent use on wood rooftops. This Ridge-It model RIDG-1 is manufactured with a D-ring on one end and is 9—3/4" long, while the RIDG-2 is manufactured with 2 D-ring ends, and is 18" long. Ridge-It Anchors are composed highly durable stainless steel and zinc-plated steel, and are compliant with all applicable OSHA regulations. Ridge-It Anchors are easy to install, and are ideal for both residential construction and maintenance...

The 30° angle fixed length, factory engineered Horizontal Lifeline System is for use by 3 workers in fall restraint or 2 in fall arrest. This system is available in a 20’ kit with or without a carry bag. This 3rd party engineered horizontal line kit is a cost-effective way to have multiple workers on the roof with room to move freely. Engineering standards specify that a horizontal lifeline without an energy absorbing device subjected to fall hazards must have a 30° anchors between anchorage...

The Malta Dynamics A6301 - Roof Anchor 18" Standard is a fixed post roof anchor, intended for permanent applications only. The A6300 has been thoroughly tested and is compatible for installation on steel and concrete substrates (fasteners sold separately). Meets the requirements for anchors rated for window cleaning. The 12-inch anchor post functions to extend though roofing materials so that it is accessible both during and after roof construction. The A6301 roof anchor is composed of durable...

The Guardian Fall Protection CB Anchor Series are perhaps the most proven fall protection anchors on the market. CB Anchors are compatible for installation onto concrete substrates. The anchor post functions to extend though roofing so that it is accessible both during and after roof construction, and is compatible for use with SRLs, vertical lifelines, horizontal lifelines, and shock absorbing lanyards. CB Anchors are composed of durable, galvanized steel, and are an excellent choice for...

#1 selling anchor for reroof, new construction and remodeling. The low-profile design is aesthetically pleasing and is designed to last the life of the structure. The Retro-Fit is designed to give all who access the roof a reliable tie-off point. Installs with just 8 nails and comes with special butyl waterproof flashing strips to seal the stainless-steel nails. Fabricated with 430 stainless steel and certified for over 5,000 pounds. Use over asphalt shingle, wood shake or metal roofing, the...

OSHA regulation 1926.502(D)(20) states "The employer shall provide for 'prompt' rescue of employees in the event of a fall or shall assure that employees are able to rescue themselves. OSHA points to research that indicates suspension in a fall arrest device can result in unconsciousness followed by death in less than 30 minutes. An Air Force study shows that volunteers suspended in harnesses experienced adverse health effects in as little as 12 to 15 minutes. Some safety experts say damage...

Bolt-on D-Ring Anchor with Installation Plate  Features: Forged D-ring and Bolt-on PlateProvides Simple Overhead Anchorage SolutionFor use on steel I-beams, columns and other steel structuresHeavy-duty steel construction2" x 4-1/2 plate with 1/2" holesComplies With ANSI Z359.18-2017  Features 2" x 4-1/2" alloy steel anchoring plate and D-ring1/2" bolt holes require user-supplied fasteners for fixed position installation.Complies with ANSI Z359.18-2017 Anchorage Location: Select...

Fall Arrest rating for two workers and Fall Restraint for two. For Concrete applications, only 2 Workers for Fall Arrest and 3 for Fall Restraint. With the new job box and material rack, you will see safe and productive increases for your leading edge work. Includes Flat-Free Tires, 20 cf Job Box (w/double door opening from the center) and a Material Rack. Raptor Alert available as an option. Streamlined frame, removing any protrusions that might create tripping hazards Enlarged front...

The Reusable Roof Anchor is built with durable zinc steel and is ideal for temporary use on wood or metal roofs. The anchor hinge design allows it to be screwed or nailed in position on roofs ranging from flat to sheer. Features:  Installed on peak or flat wood and metal decking roofs.Hinged construction for adjustment to different angles.Corrosion-resistant plated steel.Large D-Ring connection point.Fasteners NOT included.   ...

Tie-Off Straps are made from 2” wide polyester or nylon and are designed for use as temporary anchorage points to connect vertical lifelines, SRL’s, web lanyard and rope lanyards. Use on wood, steel and concrete structures. Tie-Off straps are wrapped, cinched around the structure to make for a secure anchor or can be embedded into concrete and evacuated when finished with the job. Please see the part number list below for Application, Length, Compliance and Packaging information for all our...

The Guardian Fall Protection Hold Me Rope Anchor, functions to integrate an anchorage connector with a vertical lifeline system. The anchor is certified to withstand loads up to 5,000 pounds. Its made from light weight and corrosion resistant aluminum. To use, install rope through the anchor and either connect it with a compatible carabiner to a separate anchorage connector, or loop around a compatible anchor point and pull through the anchor, and create a self-contained system. Its quick and...

The Guardian Fall Protection Cross Arm Strap is a reusable anchorage connector that can be used in a variety of fall protection applications. To use, loop over a steel support beam or other compatible anchor, and pull the small D-ring through the pass-through loop (or second, larger D-ring). Connect to the Cross Arm Strap D-ring with a compatible lanyard or SRL, and you are ready to work.Feature: Easy to installPass-through D-ring and loop modelsLightweight and durableMultiple lengths...

Ideal for metal and steel roofs, the 019-4006 permanent anchor features a special built-in energy absorber while offering a 360° working radius. The anchor can be used as a single anchor point or as part of a horizontal lifeline system. This anchor can also be used temporarily. FEATURES: Stainless steel construction360° working radiusBuilt-in energy absorber reduces stress & damage to the structureInstalls with 7, 8 mm Gesipa Bulb Rivets (included)Single User ...

The PitchPro is a premier fall protection anchor designed for sloped-roof asphalt shingle construction. The PitchPro is the perfect solution for both new and existing construction, and its low-profile installation makes it an excellent choice for permanent applications. Its oversized connection point makes attaching and detaching easy and bind-free. Made from robust powder-coated steel, the PitchPro resists damage from repeated installations, and ensures the longest possible lifespan....

The Guardian Fall Protection 4-Way Plate Anchor supports one worker in fall arrest or two workers in fall restraint, and is suitable for installation onto wood, metal, or concrete. Its 4 connection points greatly increase the potential working range, as a worker can detach from a connection point, reattach to the opposite connection point, and be able to work in fall arrest or restraint on the other side of a building, all from the same anchor. Its 90-degree angles between its connection...

The Guardian Fall Protection CB Anchor Series are perhaps the most proven fall protection anchors on the market. CB Anchors are compatible for installation onto wood, steel, and concrete substrates (fasteners are included for wood and steel applications). The anchor post functions to extend though roofing so that it is accessible both during and after roof construction, and is compatible for use with SRLs, vertical lifelines, horizontal lifelines, and shock absorbing lanyards. CB Anchors are...

Heavy-duty 1 3/4" polyester webbing with rugged forged alloy-steel hardware.3" wear pad protects primary webbing from cuts and abrasion.Ideal for I-beams and other properly rated structural members.Economical and lightweight.Can be used repeatedly.Meets the requirements of OSHA 1926 and ANSI Z359

Heavy-duty 1 3/4" polyester webbing with rugged forged alloy-steel hardware.3" wear pad protects primary webbing from cuts and abrasion.Ideal for I-beams and other properly rated structural members.Economical and lightweight.Can be used repeatedly.Meets the requirements of OSHA 1926 and ANSI Z3591-3/4" load-bearing web with 3" wide full-length wear pad for abrasion resistanceAppropriately sized alloy steel D-rings provide simple pass-through choke-on installation.May be passed-through multiple...