Subfloors

FEDERAL OSHA 1926.502(B)(3): Guardrail system shall be capable of withstanding, without failure, a force of at least 200 pounds (890N) applied within 2 inches (5.1 cm) of the top edge, in any outward or downward direction, at any point along the top edge. PRODUCT SPECIFICATIONS: Base: Durable high strength plastic Dimensions: 8½ (L) x 5¾ (W) x 5¼ (H) FEATURES: Durable high strength plastic Pliable, yet flexible to withstand harsh job-site environments and abuse Reusable Safety orange for high...

Safety Bar Temporary/Reusable Anchor The Safety Bar is a unique fall protection anchor for use while working with open truss situations. It spans 3 trusses and locks in securely with detent pins while gauging the trusses 24” on center. 2 users and tie off to the safety bar with the use of a shock absorbing lanyard or SRL’s. Our Safety Bar is the only product on the market for open framing fall protection and is used by framing crews across the country for OSHA compliance during the absolute...

The Moveable ARS Anchor follows the same design principles as our ARS Permanent Roof Anchors. This is designed for the framing tradesmen that need a quick, easy anchorage connector for their lanyards, lifelines or SRL’s. Made from 11-gauge steel that is powder coated. Comes with a 3/8” stainless steel detent pin with elastic tether. Heavy Duty 11-gauge steel construction2 models cover 2×4 trussesStainless Steel locking detent pinRated for OSHA Fall ArrestPowder Coated for Durability Please...

For horizontal surfaces. Comes with base, post-holder and post. ACRO Flat Roof Guardrail #12060 For Horizontal Surfaces, Flat Roofs, and more. The ACRO Flat Roof Guardrail System model 12060 which targets low pitch roofs, including metal roofs. Unique to the system is the low profile attaching plate which is attached either by nails, bolts or screws. Even welding is an option. A connecting shoe and post are added to complete the system. Pre-cut 2 x 4 studs are used for cross rails. During...

Combo Safety Bar for 2×4 and 2×6 trusses The Safety Bar is a unique fall protection anchor for use while working with open truss situations. It spans 3 trusses and locks in securely with detent pins while gauging the trusses 24” on center. 2 users and tie off to the safety bar with the use of a shock absorbing lanyard or SRL’s. Our Safety Bar is the only product on the market for open framing fall protection and is used by framing crews across the country for OSHA compliance during the...

The Guardian Fall Protection CB-1-B is a 6" x 6" bolt-on anchor for wood, steel, and concrete applications, and is permitted for use in combination with horizontal lifelines. This anchor is composed of steel, and is powder-coated for additional durability. It may be used in either vertical or horizontal installation applications. Fasteners not provided.Features: Easy to installCan attach to steel or concrete surfaces.Lightweight and DurableDee ring rotates 180 degrees.Permanent or temporary...

Permanent Truss Anchor Features 10-3/4" stainless steel post with 11/16" connecting eyeIncludes weather resistant post cap with zip-tie and 10" roof flange.4D stainless steel nails included for installation on wood roof trussesMeets OSHA 1926.502 regulationsInstalls on roof truss members 2 x 4 or largerKit includes weather flashing and capDurable Stainless steel construction for long lifeMay be installed before or after installation of roof sheathingAll fasteners included ...

The Guardian Fall Protection Concrete Swivel Anchor is specially designed to include a visual indicator that allows the user to clearly see when it is installed correctly (when proper torque is reached, the red cap will break away to display a green cap). This anchorage connector is composed of galvanized steel, making it capable of functioning in a variety of rough environments, and rotates 180° to allow for increased mobility.Features:  Easy to installVisual indicatorPivots and swivels...

The Guardian Fall Protection Stair Mount is an ideal solution for the installation of guardrails on unfinished stair cases, which can be some of the most dangerous locations on a construction site. Composed of powder-coated steel for superior durability and weather resistance, the Stair Mount is suitable for installation onto both wood and concrete substrates with just 4 fasteners. Key Features:  Easy to install Lightweight and durable Install onto wood or concrete Mounts...

Safety Bar Temporary/Reusable Anchor The Safety Bar is a unique fall protection anchor for use while working with open truss situations. It spans 3 trusses and locks in securely with detent pins while gauging the trusses 24” on center. 2 users and tie off to the safety bar with the use of a shock absorbing lanyard or SRL’s. Our Safety Bar is the only product on the market for open framing fall protection and is used by framing crews across the country for OSHA compliance during the absolute...

The Guardian Fall Protection Stair Mount is an ideal solution for the installation of guardrails on unfinished stair cases, which can be some of the most dangerous locations on a construction site. Composed of powder-coated steel for superior durability and weather resistance, the Stair Mount is suitable for installation onto both wood and concrete substrates with just 4 fasteners.Key Features: Mounts with 4 screws or nailsEngineered to be used on concrete 2,000 psi or strongerDimensions...

The Guardian Fall Protection Bolt Hole Anchor is a reusable 5,000 pound certified anchorage connector that can be used in either horizontal or vertical applications. Incredibly easy to install, the Bolt Hole Anchor simply needs to be squeezed to release its locking mechanism, inserted into a compatible hole ranging from 3/4" to 1—1/4" in width, and then released to reengage the locking mechanism.Features:  Easy to installCompatible with horizontal lifelinesSqueeze to open, release to lock...

The Guardian Fall Protection CB-1-W Weld-On Anchor is 2.75" in diameter, and may be used in a variety of fall protection applications. It includes a forged steel D-ring and can withstand loads up to 5,000 pounds. This anchor is suitable for installation onto either vertical or horizontal steel structures.Features: Weld on steel applicationTemporary anchor pointPermanent application permissible if user applies appropriate finishForged steel D-ringApplicable Standards: OSHA 1910 & OSHA...

Permanent Truss Anchor Installs on roof truss members 2 x 4 or larger Available as an anchor only or as a kit including weather flashing and cap Durable Stainless steel construction for long life May be installed before or after installation of roof sheathing All fasteners included