• The RIDGEPRO Roof Peak Anchor - 305-RP
  • The RIDGEPRO Roof Peak Anchor - 305-RP
  • The RIDGEPRO Roof Peak Anchor - 305-RP
  • The RIDGEPRO Roof Peak Anchor - 305-RP
  • The RIDGEPRO Roof Peak Anchor - 305-RP
  • The RIDGEPRO Roof Peak Anchor - 305-RP
  • The RIDGEPRO Roof Peak Anchor - 305-RP
  • The RIDGEPRO Roof Peak Anchor - 305-RP
  • The RIDGEPRO Roof Peak Anchor - 305-RP
  • The RIDGEPRO Roof Peak Anchor - 305-RP
  • The RIDGEPRO Roof Peak Anchor - 305-RP
  • The RIDGEPRO Roof Peak Anchor - 305-RP
Ships Free!

*Ships Standard Ground USPS Only*

Best Price Guaranteed
Price: $500.00
    Item #305-RP
    review-star review-star review-star review-star review-star
    Quantity:

    Description

    The Ridgepro Roof Attachment Tool is the ultimate Roof Safety System. It's been specially designed to get you safely from the ladder to the peak and back. The main body is constructed of high-grade aluminum capable of withstanding thousands of pounds of pulling force. The RIDGEPRO features an adjustable pitch-selection grid with an incremental range of 6/12 to 12/12 with pitches etched into the main body. The two padded cross members protect existing surface material from damage and balance the user when transitioning on and off the ladder. This piece of ladder safety equipment also features four cross-member holes to receive 7/16” lag bolts for optional anchoring, a stainless steel shackle to receive the rope and harness clip, and a set of pre-installed wheels to roll the RIDGEPRO to and from the peak. The components are welded together at the seams and finished with a brilliant red and yellow powder coat finish.

    * Pole, Rope, and Harness sold separately *

    Features:

    • Adjustable sleeve fits 6/12 to 12/12 Roof Pitches
    • 7 lb. Aluminum body for easy portability
    • Connects to extendable pole for installation from ladder(Sold Separately)
    • Built-in lifeline attachment for added security
    • Crossbeam padding prevents surface from damage
    • Innovative Arch straddles ridge vent
    • Can be converted into anchoring device
    • Connect to the peak before stepping onto a steep-slope roof
    • Safely transition on and off ladders from 6/12 to 12/12 pitches
    • Faster access to the peak than standard rope-and-harness techniques
    • Lightweight alternative to bulky scaffolding or roof planks
    • Versatility across many professional roofing applications
    • Four cross-member holes to receive 7/16” lag bolts for optional anchoring
    • Stainless steel shackle to receive the rope and harness clip
    • Pre-installed wheels for easy transport
    • Easy to assemble and install
    • Includes only the Ridgepro

    Specifications

    • Constructed of high-quality Aluminum
    • Made in USA
    • Weight: 10 lb
    • Dims: 26" x 10" x 10
    • Capacity: 5000lbs

    FAQ

    QUESTIONS ABOUT USE:

    IT LOOKS LIKE IT HOOKS ON THE RIDGE VENT, WHAT IF THERE ISN'T ONE?

    -There have been many situations where The RIDGEPRO was used without a ridge vent and we do hear from users that they do this. However, we don't endorse doing so. We recommend using The RIDGEPRO as an anchor or a tool to get positioned on the roof to use another anchor. It is hard to generalize all situations one may encounter in roofing when using The RIDGEPRO but we would say that it was not designed with a ridge vent in mind, just an angle at the roof peak.


    HOW DO I MOUNT THE DEVICE INTO THE ROOF AS YOU SUGGEST? 

    -The RIDGEPRO™ has cross members in the front and back that straddle the peak of the roof. Each cross member has two pre-drilled holes that receive 5/16" x 1 1/2" lag bolts that attach The RIDGEPRO™ to the structure. When you are finished with the job, remove the bolts and fill the holes with a weatherproof roofing sealant, then lower The RIDGEPRO™ back down onto the peak and descend safely. 

    HOW MUCH OF THE ROOF CAN I ACCESS ONCE I HAVE INSTALLED THE RIDGEPRO?
    -If The RIDGEPRO™ is securely anchored, you can access the entire roof surface. If The RIDGEPRO™ is not anchored, you must stay on the wheel side of the roof and can swing from the center of the extension pole up to 30 degrees from either side of center.

    CAN I USE THE RIDGEPRO ON A NEW ROOF WITHOUT ASPHALT SHINGLES?

    -It is not recommended that you use The RIDGEPRO™ on an unfinished roof.

    CAN I USE THE RIDGEPRO ON A METAL ROOF?

    -For standing seam metal roofing, no. The cross members are too wide and the arch does not always clear the metal ridge cap. On corrugated metal roofs, yes.


    QUESTIONS ABOUT PRODUCT:

    WHAT IS THE RIDGE-PRO MADE OF?
    -The RIDGEPRO™ is constructed of 6061-T6 aluminum alloy (also known as aircraft-grade aluminum). There are two stainless steel pins. The first pin secures the extension pole into the device and the second pin locks in the number selection on the pitch grid. There are two sponge-rubber pads on the bottom cross members of The RIDGEPRO™ that prevent damage to the roof surface.

    WHAT ARE THE ROOF PITCHES THAT THE RIDGEPRO WILL WORK ON?
    -There are seven settings that start at a 6/12 pitch and go all the way up to a 12/12 pitch. It is recommended that if you use The RIDGEPRO™ on a 6/12, 7/12, or 8/12 pitch roof, you should permanently mount the device into the roof structure. While we still advise you to mount the device on a roof above an 8/12, your risk of the device pulling up over the peak is reduced.

    HOW MUCH TESTING WENT INT THE RIDGEPRO BEFORE BRINGING IT TO THE MARKET?

    -The RIDGEPRO™ was field-tested for two years before going to market. As it was being tested in the field, there were so many requests to buy the device that we realized the market was there and we went into production.

     

    COMPLIANCE QUESTIONS:

    IS THE RIDGEPRO COMPLIANT WITH OSHA?
    When anchored, The RIDGEPRO™ is compliant with OSHA standard 1926 Subpart M for a single user, withstanding and exceeding 5,000 pounds of static strength force. When not anchored, OSHA does not regulate "non-anchors" so you would be working with The RIDGEPRO™ as an inspection tool, which grants 15 minutes of time on the roof before you must anchor.

    AM I IN VIOLATION OF NOT HAVING A "3-POINT CONTACT" WHEN INSTALLING THE RIDGEPRO?

    -Three-point contact is used for ascending or descending. When you are installing The RIDGEPRO™, you are neither ascending or descending, you are working on a "working platform" which allows a 2-point stance.

    DO ALL ROOFING-RELATED INDUSTRIES FALL UNDER THE OSHA STANDARDS?

    Unfortunately not. Construction and roofing companies are generally regulated by these federal standards. Professional inspectors, insurance adjusters, solar installers, telecom professionals, firemen and other service professionals do not have to abide by these federal standards in some cases. In an ideal world, everyone who gets on a roof would operate with a similar set of safety practices.

    Reviews (1) • Write a review!

    Reviewer: Paul Grishko on 6/20/2024

    Rating:
    review-star review-star review-star review-star review-star
    Free Shipping
    Good place to order the ridge pro. free shipping. This is the 3rd one i ordered from them
    Related Items
    Tie Down 48589 Ladder Buddy Ladder Stabilizer
    Helps prevent costly gutter damage when placed directly on roof.
    Price: $107.80
    Availability: In Stock
    Usually ships within 1-2 Business Days

      With its 18.5 in. standoff, this stabilizer provides a secure and balanced platform for working on extension ladders. Experience easy access to gutters, downspouts, and soffits, while safeguarding surfaces from damage. Crafted from lightweight and durable aluminum, this compact stabilizer weighs only 12 lbs., ensuring easy handling and transportation. Keep your ladder stable and protect roofing, gutters, siding, and paint finishes with Tie Down's Stand-Off Extension Ladder Stabilizer. SAFE AND...

      Guardian Fall Protection - 37113 - Series 3 Harness - PT...
      A multi-purpose, full-body harness with enhanced features and comfort
      Price: $88.13
      Availability: In Stock
      Usually ships within 1-2 Business Days

        Builds on the foundation set by the Series 1 Harness, with its sleek padding and numerous configuration options. Long days on the job require equipment that keeps you comfortable and safe, giving you the freedom to focus on the task ahead. Features: Water-repellent webbing with wear-indicating inner core is longer lasting & easier to inspectSpring-loaded torso adjusters offer quick & simple adjustment for a tailored fitDurable label cover protects important safety informationDual lanyard...

        FallTech 8125 - 5/8' Premium Polyester Rope - w/ 1 Snap...
        5/8' Premium Polyester Rope - W/ 1 Snap Hook & Braid-End - 25' Length
        Price: $58.80
        Availability: In Stock
        Usually ships within 1-2 Business Days

          FEATURESConstructed with 5/8" low-stretch 3-strand twisted ropePremium polyester blend reduces kinking and hockling.Steel thimble and splice-protecting shrink tube are included for lasting durabilityIncludes alloy steel snap hook for anchorage connectionBack-spliced trailing end is ideally suited for pairing with hinged arresters and adjusters

          The RidgePro - Extension Pole, From 8' to 16'
          Extension pole for The RidgePro (8'-16')
          Price: $70.00
          Availability: In Stock
          Usually ships within 1-2 Business Days

            Enhance your roofing safety with the RIDGEPRO® 8′ Extension Pole, designed to complement the RIDGEPRO® Safety Anchor System. This robust extension pole extends from 8 feet to an impressive 16 feet, allowing you to securely position the safety anchor system onto most roofs directly from your ladder. Key Features: Extended Reach: The pole extends from 8′ to 16′, providing ample length to reach most roofing scenarios.Replacement Pole: This is a replacement pole specifically for the RIDGEPRO®...

            Leave a message