5-Hole Pipe Portal Flashing System For pipe penetrations from 1/2" to 2-1/2" Nominal Pipe O.D.Provide pre-manufactured Pipe Portal® flashing systems as manufactured by Portals Plus at all necessary roof penetrations 2-1/2"" or less, or as shown on drawings. Each 5-Hole Pipe Portal® flashing system can be requested to include an RPS pre-manufactured roof curb of style as shown on drawings or as specified for roof curbs, single or double Pipe Portal® flashing system cover with sealing ribs on...

Pipe Portal with C-212 Cap Furnish and install the Portals Plus Pipe Portal System at all points where up to two pipes .375" - 1" in diameter and two pipes 1" - 2" in diameter penetrate the roof. The Pipe Portal shall include an 18 gauge galvanized roof curb model RC-___A with integral base plate, continuously welded corner seams, factory-installed wood nailer, and 1.5" 3lb. rigid fiberglass insulation. The Pipe Portal shall be furnished with a laminated, acrylic coated, ABS plastic curb cover...

Small RC-2A Straight Sided Curb for decks with lightweight fill or tapered insulation. Used together with Pipe Portal Systems to create a versatile, leak proof, and weather tight solution to routing pipes through a roof.

Pipe Portal with C-481 Cap Furnish and install the Portals Plus Pipe Portal System at all points where up to four pipes .375" - 1" in diameter penetrate the roof. The Pipe Portal shall include an 18 gauge galvanized roof curb model RC-___A with integral base plate, continuously welded corner seams, factory-installed wood nailer, and 1.5" 3lb. rigid fiberglass insulation. The Pipe Portal shall be furnished with a laminated, acrylic coated, ABS plastic curb cover with pre-punched holes and...

Black cap for Alumi-Flash Each boot can handle up to four pipes.2 pipes 3/8 to 1-inches.2 pipes 1 to 2 inches OD.Four stainless steel adjustable clamps are provided to secure the cap around pipe penetrations. The flexible EPDM cap eliminates roof leaks because penetrations can expand, contract, and vibrate independently of the roofing system.Used together with Alumi-Flash or Plasti-Flash Base.The EPDM cap is mechanically sealed to a Alumi-Flash or Plasti-Flash base (not supplied) by a double...

Furnish and install the Portals Plus Large Pipe Boot at all points where any projection penetrates the roof system, and is from 8" to 12" or 6" to 12" in diameter. The Large Pipe Boot shall include 60 mil EPDM or NEOPRENE compression molded body.The Large Pipe Boot shall also include Portals Plus' Snaplock Clamp. Use white or black as necessaryAttachment of Large Pipe Boot to roof system shall be done in accordance with Portals Plus Installation Instructionsand the roofing membrane...

Each boot can handle up to four pipes. C-481 Cap has allow 4-pipes, 0.375 to 1 inch OD. Four stainless steel adjustable clamps are provided to secure the cap around pipe penetrations. The flexible EPDM cap eliminates roof leaks because penetrations can expand, contract, and vibrate independently of the roofing system. Used together with Alumi-Flash or Plasti-Flash Base. The EPDM cap is mechanically sealed to a Alumi-Flash or Plasti-Flash base (not supplied) by a double "Weather-Tite Pressure...

Black Cap for Alumi-Flash This Portals Plus 29215 Cap with Clamp (C126 Black) covers one roof penetration 2" - 6" in diameter. The molded EPDM cap includes Portals Plus' stainless steel Snaplock Clamp. The flexible EPDM cap eliminates roof leaks because penetrations can expand, contract, and vibrate independently of the roofing system.Used together with Alumi-Flash or Plasti-Flash Base.The EPDM cap is mechanically sealed to the Alumi-Flash or Plasti-Flash base by a double "Weather-Tite...

Pipe Portal with C-412 Cap Furnish and install the Portals Plus Pipe Portal System at all points where up to four pipes 1" - 2" in diameter penetrate the roof. The Pipe Portal shall include an 18 gauge galvanized roof curb model RC-___A with integral base plate, continuously welded corner seams, factory-installed wood nailer, and 1.5" 3lb. rigid fiberglass insulation. The Pipe Portal shall be furnished with a laminated, acrylic coated, ABS plastic curb cover with pre-punched holes and molded...

Designed to accommodate projections from .125" to 26" in diameter, and work in conjunction with any configuration of corrugated metal roof. Comes in two styles, standard for normal projection flashing and retrofit style for use with projections that can not be disconnected. Engineered so the aluminum flanged base bends to any contours, roof irregularities, or pitches. Seals watertight to the roof panel with an approved sealant and standard roofing fasteners. Available in two materials - EPDM...

Small RC-2A Straight Sided Curb for decks with lightweight fill or tapered insulation. Portals Plus #38101 RC-2A Small Straight Sided Roof Curb is 5-Hole pipe portal flashing system. It is engineered to provide a weather proof seal with any roof penetration. The EPDM caps and ABS cover provide excellent weather resistance. The EPDM caps are designed to fit. 1/2 inch - 2 1/2 inch nominal pipe. The EPDM rubber have a serviceable temperature range of -60°F to +270°F and resistant to ozone and...

Each boot can handle up to four pipes. Each Cap Hhndles 4 pipes, 1 to 2 inch OD. Four stainless steel adjustable clamps for each cap are provided to secure the cap around pipe penetrations. The flexible EPDM cap eliminates roof leaks because penetrations can expand, contract, and vibrate independently of the roofing system. Used together with Alumi-Flash or Plasti-Flash Base. The EPDM cap is mechanically sealed to a Alumi-Flash or Plasti-Flash base (not supplied) by a double "Weather-Tite...

Pipe Portal with C-126 Cap Furnish and install the Portals Plus Pipe Portal System at all points where one penetration 2" - 6" in diameter penetrates the roof. The Pipe Portal shall include an 18gauge galvanized roof curb model RC-___A with integral base plate, continuously welded corner seams, factory-installed wood nailer, and 1.5" 3lb. rigid fiberglass insulation. The Pipe Portal shall be furnished with a laminated, acrylic coated, ABS plastic curb cover...

Features: Flashings for metal roof and wall systemsThe Deck-Mate flashing incorporates a stepped profile which creates a compression seal between the schedule 40 piping and the flashing.Designed with proper reinforcing ribs to allow the flashing to maintain rigidity and the shape of the product. By combining the stepped profile and the reinforcing ribs, the product will properly accommodate the use of a stainless steel clamp. The clamp is crucial in maintaining a water-tight seal for years to...

Features:  Furnish and install the Portals Plus Standard Alumi-Flash at all points where up to two pipes .375" - 1" and up to two pipes 1" - 2" in diameter are penetrating the roof.The Standard Alumi-Flash shall include a.060" spun aluminum base unit with a height of 4" and a base diameter of 14". The 8 "collared opening shall have two beaded sealing rings roll-formed into the top edge. An EPDM (Ethylene Propylene Diene Monomer) compression molded cap model C-212 shall be utilized. All...

Furnish and install the Portals Plus Extra TallAlumi-Flash at all points where up to four pipes 1" - 2" in diameter penetrate the roof. The Extra Tall Alumi-Flash shall include a .060" spun aluminum base unit with a height of 13" and a base diameter of 14". The 8" collared opening shall have two beaded sealing rings roll-formed into the top edge. An EPDM (Ethylene Propylene Diene Monomer)compression molded cap model C-412 shall be utilized. All Caps shall include PortalsPlus' stainless steel...

Pipe Portal with C-182 Cap Furnish and install the Portals Plus Pipe Portal System at all points where pipes 8" - 12" in diameter penetrate the roof. The Pipe Portal shall include an 18 gauge galvanized roof curb model RC-___A with integral base plate, continuously welded corner seams, factory-installed wood nailer and, 1.5" 3lb. rigid fiberglass insulation. The Pipe Portal shall be furnished with a laminated, acrylic coated, ABS plastic curb cover with pre-punched holes and molded sealing...

Round-base boots help protect circular openings in a roof from rain, snow, and other weather. They come in various configurations depending on the number and size of the pipes, the roof's pitch, and more. 42100 & 42130 - SMALL-BLACK WITH CLAMP - EPDM 1"- 3" Furnish and install the Portals Plus Small Pipe Boot at all points where any projection penetrates the roof system, and is less than 3" in diameter.The Small Pipe Boot shall include 60 mil EPDM or HYPALON compression molded body.The Small...

Portals Plus Pipe Boot Clamp 1"-6" Medium Black 10ct Furnish and install the Portals Plus Medium Pipe Boot at all points where any projection penetrates the roof system and is less than 6" in diameter. The Medium Pipe Boot shall include 60 mil EPDM or NEOPRENE compression molded body and shall include 70 mil PVC (Polyvinyl Chlo-ride) or TPO (Thermoplastic Olefin) injection-molded body.The Medium Pipe Boot shall also include Portals Plus' Snaplock Clamp.Whenever necessary utilize Portals Plus...

Key Features:  Furnish and install the Portals Plus Standard Alumi-Flash at all points where up to four pipes .375" - 1" in diameter penetrate the roof. The Standard Alumi-Flash shall include a .060 spun aluminum base unit with a height of 4" and a base diameter of 14". The 8" collared opening shall have two beaded sealing rings roll-formed into the top edge. An EPDM (Ethylene Propylene Diene Monomer)compression molded cap model C-481 shall be utilized. All Caps shall include PortalsPlus'...

Furnish and install the Portals Plus Extra Tall Alumi-Flash at all points where up to two pipes .375" - 1" in diameter and up to two pipes 1" - 2" in diameter penetrate the roof.The Extra Tall Alumi-Flash shall include a.060" spun aluminum base unit with a height of 13" and a base diameter of 14". The 8" collared opening shall have two beaded sealing rings roll-formed into the top edge. An EPDM (Ethylene Propylene Diene Monomer)compression molded cap model C-212 shall be utilized. All Caps...

Straight sided roof curb for decks with lightweight fill. Used together with Pipe Portal DUAL Systems to create a versatile, leak proof, and weather tight solution to routing pipes through a roof.

Furnish and install the Portals Plus Double Pipe Portal at all points where up to two pipes .375" - 1" in diameter and six pipes 1" - 2" in diameter penetrate the roof. The Pipe Portal shall include an 18 gauge galvanized roof curb model RC-___A with integral base plate, continuously welded corner seams, factory-installed wood nailer, and 1.5" 3lb. rigid fiberglass insulation. The Pipe Portal shall be furnished with a laminated, acrylic coated, ABS plastic curb cover with prepunched holes and...

Features: Flashings for metal roof and wall systemsThe Deck-Mate flashing incorporates a stepped profile which creates a compression seal between the schedule 40 piping and the flashing.Designed with proper reinforcing ribs to allow the flashing to maintain rigidity and the shape of the product. By combining the stepped profile and the reinforcing ribs, the product will properly accommodate the use of a stainless steel clamp. The clamp is crucial in maintaining a water-tight seal for years to...

Pipe Portal with White C-126 CapFurnish and install the Portals Plus Pipe Portal System at all points where one penetration 2" - 6" in diameter penetrates the roof. The Pipe Portal shall include an 18gauge galvanized roof curb model RC-___A with integral base plate, continuously welded corner seams, factory-installed wood nailer, and 1.5" 3lb. rigid fiberglass insulation. The Pipe Portal shall be furnished with a laminated, acrylic coated, ABS plastic curb cover with prepunched holes and...

Small RC-3A Canted Curb for non-insulated decks Used together with Pipe Portal DUAL Systems to create a versatile, leak proof, and weather tight solution to routing pipes through a roof.

Pipe Portal with C-212 Cap Furnish and install the Portals Plus Pipe Portal System at all points where up to two pipes .375" - 1" in diameter and two pipes 1" - 2" in diameter penetrate the roof. The Pipe Portal shall include an 18 gauge galvanized roof curb model RC-___A with integral base plate, continuously welded corner seams, factory-installed wood nailer, and 1.5" 3lb. rigid fiberglass insulation. The Pipe Portal shall be furnished with a laminated, acrylic coated, ABS plastic curb cover...

Double RC-2A Straight Sided Curb for decks with lightweight fill Furnish and install the Portals Plus Double Pipe Portal at all points where up to two pipes .375" - 1" in diameter, up to two pipes 1" - 2" in diameter and one pipe 2" - 6" in diameter penetrate the roof.The Pipe Portal shall include an 18 gauge galvanized roof curb model RC-___A with integral base plate, continuously welded corner seams, factory-installed wood nailer, and 1.5" 3lb. rigid fiberglass insulation. The Pipe...

Furnish and install the Portals Plus Double Pipe Portal at all points where two pipes 2" - 6" in diameter penetrate the roof. The Pipe Portal shall include an 18 gauge galvanized roof curb model RC-___A with integral base plate, continuously welded corner seams, factory-installed wood nailer, and 1.5" 3lb. rigid fiberglass insulation. The Pipe Portal shall be furnished with a laminated, acrylic coated, ABS plastic curb cover with pre-punched holes and molded sealing rings on two 8" collared...

Portals Plus #29285, Plastic Curb COVER (white color), for use with C-212, C-412 and C-481 Cap types. A laminated, acrylic coated, ABS plastic curb cover with pre-punched hole and molded sealing ring. C-412 Curb top cap is not included.

Features: Furnish and install the Portals Plus StandardAlumi-Flash at all points where up to four pipes 1" - 2" in diameter penetrate the roof. The Standard Alumi-Flash shall include a .060" spun aluminum base unit with a height of 4" and a base diameter of 14". The 8" collared opening shall have two beaded sealing rings roll-formed into the top edge. An EPDM(Ethylene Propylene Diene Monomer) compression molded cap model C-412 shall be utilized. All Caps shall include Portals Plus'stainless...

Features:Furnish and install the Portals Plus Extra Tall Alumi-Flash as manufactured by Portals Plus, Inc., Bensenville, IL, at all points where one penetration 2" - 6" in diameter penetrates the roof. The Extra Tall Alumi-Flash shall include a.060" spun aluminum base unit with a height of 13" and a base diameter of 14". The 8" collared opening shall have two beaded sealing rings roll-formed into the top edge. An EPDM (EthylenePropylene Diene Monomer) compression molded cap model C-126 shall...

(1) Penetration from 8 inches to 12 inchesAll Caps shall include Portals Plus'stainless steel Snaplock Clamps.

Features: Furnish and install the Portals Plus Extra Wide Alumi-Flash at all points where up to two pipes .375" - 1" in diameter and up to two pipes 1" - 2" in diameter penetrate the roof.The Extra Wide Alumi-Flash shall include a .060" spun aluminum base unit with a height of 4" and a base diameter of 18". The 8" collared opening shall have two beaded sealing rings roll-formed into the top edge.An EPDM (Ethylene Propylene Diene Monomer) compression molded cap model C-212 shall be utilized.All...

Features: Furnish and install the Portals Plus Standard Alumi-Flash at all points where one penetration 2" - 6" in diameter penetrates the roof. The Standard Alumi-Flash shall include a .060" spun aluminum base unit with a height of 4" and a base diameter of 14". The 8" collared opening shall have two beaded sealing rings roll-formed into the top edge. An EPDM (Ethylene Propylene Diene Monomer) compression molded cap model C-126 shall be utilized. The Cap shall include PortalsPlus' stainless...

Features: Flashings for metal roof and wall systemsThe Deck-Mate flashing incorporates a stepped profile which creates a compression seal between the schedule 40 piping and the flashing.Designed with proper reinforcing ribs to allow the flashing to maintain rigidity and the shape of the product. By combining the stepped profile and the reinforcing ribs, the product will properly accommodate the use of a stainless steel clamp. The clamp is crucial in maintaining a water-tight seal for years to...

Furnish and install the Portals Plus Double Pipe Portal at all points where up to eight pipes .375" - 1" in diameter pen-etrate the roof. The Pipe Portal shall include an 18 gauge galvanized roof curb model RC-___A with integral base plate, continuously welded corner seams, factory-installed wood nailer, and 1.5" 3lb. rigid fiberglass insulation. The Pipe Portal shall be furnished with a laminated, acrylic coated, ABS plastic curb cover with prepunched holes and molded sealing rings on two 8"...

Small RC-4A Raised Canted Curb. It is fabricated with 18 gauge galvanized roof curb with integral base plate Used together with Pipe Portal Single Cap Systems to create a versatile, leak proof, and weather tight solution to routing pipes through a roof.

Furnish and install the Portals Plus Double Pipe Portal at all points where up to eight pipes 1" - 2" in diameter pen-etrate the roof. The Pipe Portal shall include an 18 gauge galvanized roof curb model RC-___A with integral base plate, continuously welded corner seams, factory-installed wood nailer, and 1.5" 3lb. rigid fiberglass insulation. The Pipe Portal shall be furnished with a laminated, acrylic coated, ABS plastic curb cover with prepunched holes and molded sealing rings on two 8"...

Features: Furnish and install the Portals Plus Extra Wide Alumi-Flash at all points where up to four pipes 1" - 2" in diameter penetrate the roof. The Extra Wide Alumi-Flash shall include a .060" spun aluminum base unit with a height of 4" and a base diameter of 18". The 8" collared opening shall have two beaded sealing rings roll-formed into the top edge.An EPDM (Ethylene PropyleneDiene Monomer) compression molded cap model C-412 shall be utilized. All Caps shall include Portals Plus'...

Large RC-2A Straight Sided Curb for decks with lightweight fill or tapered insulation. Furnish and install the Portals Plus Pipe Portal System at all points where pipes 8" - 12" in diameter penetrate the roof. The Pipe Portal shall include an 18 gauge galvanized roof curb model RC-___A with integral base plate, continuously welded corner seams, factory-installed wood nailer and, 1.5" 3lb. rigid fiberglass insulation. The Pipe Portal shall be furnished with a laminated, acrylic coated, ABS...

Double RC-3A Canted Curb for non-insulated decksUsed together with Pipe Portal DUAL Systems to create a versatile, leak proof, and weather tight solution to routing pipes through a roof.

Key Features: Furnish and install the Portals Plus Extra Wide Alumi-Flash at all points where up to four pipes .375" - 1" in diameter penetrate the roof.The Extra Wide Alumi-Flash shall include a.060" spun aluminum base unit with a height of 4" and a base diameter of 18". The 8" collared opening shall have two beaded sealing rings roll-formed into the top edge.An EPDM (Ethylene Propylene Diene Monomer) compression molded cap model C-481 shall be utilized. All Caps shall include Portals Plus'...

Furnish and install the Portals Plus Extra Tall Alumi-Flash at all points where up to four pipes .375" - 1" in diameter penetrate the roof.The Extra Tall Alumi-Flash shall include a .060 spun aluminum base unit with a height of 13" and a base diameter of 14". The 8" collared opening shall have two beaded sealing rings roll-formed into the top edge. An EPDM (Ethylene Propylene Diene Monomer)compression molded cap model C-481 shall be utilized. All Caps shall include PortalsPlus' stainless steel...

Furnish and install the Portals Plus Double Pipe Portal at all points where up to four pipes .375" - 1" in diameter and up to four pipes 1" - 2" in diameter penetrate the roof. The Pipe Portal shall include an 18 gauge galvanized roof curb model RC-___A with integral base plate, continuously welded corner seams, factory-installed wood nailer, and 1.5" 3lb. rigid fiberglass insulation. The Pipe Portal shall be furnished with a laminated, acrylic coated, ABS plastic curb cover with prepunched...

Furnish and install the Portals Plus Double Pipe Portal at all points where up to two pipes .375" - 1" in diameter, up to two pipes 1" - 2" in diameter and one pipe 2" - 6" in diameter penetrate the roof.The Pipe Portal shall include an 18 gauge galvanized roof curb model RC-___A with integral base plate, continuously welded corner seams, factory-installed wood nailer, and 1.5" 3lb. rigid fiberglass insulation. The Pipe Portal shall be furnished with a laminated, acrylic coated, ABS plastic...

Features: Furnish and install the Portals Plus Extra Wide Alumi-Flash at all points where one penetration 2" - 6" in diameter penetrates the roof. The Extra Wide Alumi-Flash shall include a .060" spun aluminum base unit with a height of 4" and a base diameter of 18". The 8" collared opening shall have two beaded sealing rings roll-formed into the top edge. An EPDM (Ethylene Propylene Diene Monomer)compression molded cap model C-126 shall be utilized. All Caps shall include Portals...

Double RC-4C Raised Canted Curb for decks with rigid insulation  Portals Plus #32181 Galvanized Steel Curb, 12x27.5 inch top, 9.5 inch high, Raised Canted Wall, Type RC-4A curb. Fits Double Portal Cap #29305. Overall size 27.5 inch long x 12 inch wide x 9.5 inch high. The base roof curb is used together with an upper double Pipe Portal System and appropriate caps (typical is shown in black, not included) to create a versatile, leak proof, and weather tight solution to routing pipes...