Edge Folding Tools

No more headaches associated with properly Field-Bending the high and low sides of metal building panels. Weather you want to Hem the low sides or Close the high sides, this is the right tool for you! Features: 15 ¼”- 1" Throat x ⅛” Gap17 ¼”- 1 ½” Throat x ⅛” Gap19”- 1 ½” Throat x 3/16” Gap 20”- 1 ½” Throat x ⅛” Gap Zinc-Chromate PlatedSingle Rubber Grip HandleLow Side HemmingHigh Side ClosingCommon Metal Panel Widths: 12",15",16",18"+ No More! Exposed FastenersIce DamagingRusty Panel...

Big 24-inch (61 cm) and compact 18-inch (46 cm) Drip Edge Folding Tools make quick bends along the drip edge of flat-pan standing seam metal roofing panels. Two rib-reinforced steel plates are permanently welded together to create two folding seams for making 1-inch (25.4 mm) and 1-1/2-inch (38.1 mm) deep bends in maximum 22-gauge (0.76 mm) steel. A two-post-design, fiberglass reinforced nylon handle offers durable, lightweight strength and high leverage for working overhead or on a bench....

For Single Locking the 1/2" Wide Standing Seam FEATURES Single Lock Hand SeamerForms 90 degree bendFor hard to reach placesFor an entire roofTo start or finish a roofLightweightEasy to useWill not scratch or peel paintThis tool is compatible on profiles measuring 1/2" across topFor a double lock, pair with ESE 099 Finish Hand SeamerMade in the USAMaximum gauges: steel (24 ga.), aluminum (0.032), copper (20 oz.) Please Note: Seams approximately 65" at a time. The pivot is 10" but there are...

For Single Locking Profiles that Measure 1/2" or 9/16" Across the Top Single Lock Hand SeamerForms 90 degree bendFor hard to reach placesFor an entire roof or to start or finish a roofLightweight and easy to useUnique leverage designWill not scratch or peel paintCompatible on profiles measuring 1/2" or 9/16" across topFor a double lock 1/2", pair with ESE 099 Finish Hand SeamerFor a double lock 9/16", pair with ESE 099HD Finish Hand SeamerMade in the USAPlease Note: Seams approximately 7.25"...

For Double Locking a 1/2" Wide Standing Seam Double lock hand seamerForms the 180° bendFor hard to reach placesTo start or finish (or an entire roof)Lightweight and easy to useWill not scratch or peel paintNote: before using this tool, prepare the seam with the 001 or 001C to a single lock bendMade in the USAPlease Note: Seams approximately 6" at a time. The pivot is 11" but there are reliefs on each side to allow a smooth transition between each crimpBefore Using This Tool, Prepare the Seam...

Versatile, compact 18-inch (46 cm) drip edge folding tool makes quick bends along the drip edge of flat-pan standing seam metal roofing panels.Two rib-reinforced steel plates are permanently welded together to create two folding seams for making 1-inch (25.4 mm) and 1-1/2-inch (38.1 mm) deep bends in maximum 22-gauge (0.76 mm) steel. A two-post-design, fiberglass reinforced nylon handle offers durable, lightweight strength and high leverage for working overhead or on a bench.Features:...

For Single Locking the 3/4" Wide Standing Seam FEATURESSingle lock hand seamerForms the 90 degree bendFor hard to reach placesTo start or finish (or an entire roof)Lightweight and easy to useWill not scratch or peel paintThis tool can be used on profiles that measure 3/4" across the topFor a double lock, pair with ESE 099-750 Finish Hand SeamerMade in the USAMaximum gauges : steel (24 ga.), aluminum (0.032), copper (20 oz.) Please Note: Seams approximately 5.75" at a time. The pivot is 10" but...

For Single Locking Profiles that Measure 13/16" Across the Top Single lock hand seamerForms the 90 degree bendFor hard to reach placesTo start or finish (or an entire roof)Lightweight and easy to useWill not scratch or peel paintCan be used on profiles that measure 13/16" across the topFor a double lock, pair with ESE 099-812 Finish Hand SeamerMade in the USAPlease Note: Seams approximately 6" at a time. The pivot is 10" but there are reliefs on each side to allow a smooth transition between...

The Rau Eave Bending and Closing tools feature Rau quality with a durable epoxy coating finish for long life that can be used with the panels in place on the roof. Allows Quick and Accurate Shaping. One Handed Operation. Eaves, gutters Used for the first step in bending panels for dormer windows Can add spacer at eccentric pivot to create edges in excess of 90?�, for example, high lips and water beads at inner eaves ...

This simple metal folding tool is designed as two steel plates welded together with slits running along the length of them. It is very easy to use and provides the ability to make 3/8" and 1" bends. FEATURES Folding SeamsIdeal for HVAC applications3/8" Folds in Drive Cleats8" compact folding lengthEasy-to-use folding mechanism for metal sheetsHandy sight holes assure proper depth alignment

Use after first seaming with a Single Lock (First Stage) Hand SeamerDetails Double lock hand seamerForms the second stage 180 degree bendFor hard to reach placesUse to start, finish or seam the entire roofUnique leverage designLightweight and easy to useWill not scratch or peel paintFor profiles that measure 13/16″ across the topNote: before using this tool the panel must be seamed with a first stage (single lock) seamer Maximum Bending Gauges Steel : 22 gaAluminum : 0.040″Copper : 20 oz...

Use after first seaming with a Single Lock (First Stage) Hand Seamer Details Double lock hand seamerForms the second stage 180 degree bendFor hard to reach placesUse to start, finish or seam the entire roofUnique leverage designLightweight and easy to useWill not scratch or peel paintFor profiles that measure 3/4″ across the topNote: before using this tool the panel must be seamed with a first stage (single lock) seamer Maximum Bending Gauges Steel : 22 gaAluminum :...

When it come to metal roofing, save yourself the time and headache with properly field bending  the high side of the metal panel to provide the added protection from moisture getting behind the closures. The Standard Turn Up Tool fits most common panels including R-Panel and other 3' and 2' panels.Features:3/16" Gap1-3/4" Turn-Up DepthZinc-Chromate PlatedSingle Rubber Grip HandleNo More!Leaky GapsExpensive ClosuresLabor Cutting Z-closuresLow Quality Tools ...

The Rau 117 WDF is a “second-stage” or “double-lock” tool designed to be used after the 90° lock has been made. This tool bends the panel around to a 180° lock anytime a double lock is required, for example, when using an electric seamer. This tool requires that the seam be first prepped with a single lock tool. Used in conjunction with the RAU 111 or 128.Finishes the 2nd bend of the double lock standing seam in just one operation.Used on seams that measure 1/2” across on the top leg.Your...

This tool is designed for single-lock seams (90° lock) or for the first stage of a double lock system. The blades are 8-5/8″ wide and feature a smooth transition in to prevent marring. This tool fits any 1″ or 1-1/2″ standing seam roof panel with a seam top width of no more than 1/2″. This manually-operated square seam folder joins SPM 30/80 profiles, smooth lead-on avoid marks at the transitions. It is easy to handle when working on extreme angular sheeting. The tool may also be used for...

Closes the single lock seam & the double lock seam. The angled double folder XP was developed for the protection of coated surfaces. The robust plastic jaws protect the sheet metal profiles from scratches and damage. Your hands never have to leave the tool when closing the seam and are also in a comfortable bending position. This results in maximum speed and efficiency when on the roof. Advantages: One tool for two work steps. Robust and resistant. No scratched surface when folding. Ideal for...

For Single Locking the 13/16" Wide Standing Seam FEATURES Single lock hand seamerForms the 90 degree bendFor hard to reach placesTo start or finish (or an entire roof)Lightweight and easy to useWill not scratch or peel paintCan be used on profiles that measure 13/16" across the topFor a double lock, pair with ESE 099-812SU Finish Hand SeamerMade in the USAMaximum gauges: steel (24 ga.), aluminum (0.032), copper (20 oz.) Please Note: Seams approximately 4.5" at a time. The pivot is 7.5" but...

An intelligent system not only simplifies work processes, but also helps to get a better grip on appointments. The SYSTEM RAU® angled double folder is a successful example of efficient work. It allows the closed angled seam to be closed quickly and easily to form a double standing seam in a single operation. Specs: Working Length: 220mmHeight: 50mmWidth Depth: 480mmWeight: 5.5 lbs ( 2.5 kg) Jaw Width: 8 1/2''Tool Length: 17'' ...

Use after first seaming with a Single Lock (First Stage) Hand Seamer Details Double lock hand seamerForms the second stage 180 degree bendFor hard to reach placesUse to start, finish or seam the entire roofUnique leverage designLightweight and easy to useWill not scratch or peel paintFor profiles that measure 11/16″ across the topNote: before using this tool the panel must be seamed with a first stage (single lock) seamer Maximum Bending Gauges Steel : 22 ga.Aluminum : 0.040″Copper : 20...

Use after first seaming with a Single Lock (First Stage) Hand Seamer Details Fouble lock hand seamerForms the second stage 180 degree bendFor hard to reach placesUse to start, finish or seam the entire roofUnique leverage designLightweight and easy to useWill not scratch or peel paintFor profiles that measure 7/8″ across the topNote: before using this tool the panel must be seamed with a first stage (single lock) seamer Maximum Bending Gauges Steel : 22 ga.Aluminum : 0.040″Copper : 20 oz. ...

Square-Seam Folder for easy and quick closing of mechanical lock standing seam. Will close seams that measure 1/2″ on the top leg width. These seams can vary in height, but commonly stand at 1″ or 1.5″. The manual angle seam closer is used to close the profile SPM 30/80. Carefully continuing the work tool avoids pressure points at the transitions. The ergonomic arrangement of the handles makes the SYSTEM RAU® angle seam closer particularly user-friendly. This tool shows all its strengths with...

Twin Squareseam Folder, Upright We always have the goal of manufacturing tools that are tailored to the needs of the user. With the WDF ST, we have developed a tool whose simple and functional handling is ideally suited to closing the closed angled fold into a double fold. To ensure optimal work, the handles can be adjusted in 3 lengths. The WDF ST is easy to transport when retracted.  FEATURES Used in conjunction with the RAU 111 or 128Finishes the 2nd bend of the double lock standing...

Malco’s 12F, 18F, and 24F Sheet Metal Folding Tools are premium options for bending and forming metal. Each model features a superior design and handy sight holes to ensure proper depth alignment. Whether you are an HVAC or roofing professional, Malco provides the right tool for the job. Each sheet metal folding tool can be used for various applications. Below, you can learn more about each model and how it can assist on the job site: The 12F model is 12″ (31 cm) long with 3/8″ (9.5 mm) and 1″...