Non-Powered On Deck

The Rooftop Equipment Spreader Rollers eliminate the frustrations resulting from poor quality rollers. Spreader rollers have a double production rate compared to paint rollers. This roller is designed to dramatically improve your profit margin by eliminating wastage of time and materials. Various options for width and coverage of the Spreader Rollers are available. The Rooftop Equipment Spreader Rollers are recommended for use with the Better Spreader or Tank Spreader.  Dramatically...

The Rooftop Equipment Spreader Rollers eliminate the frustrations resulting from poor quality rollers. Spreader Rollers have a double production rate compared to paint rollers. The roller is designed to dramatically improve your profit margin be eliminating wastage of time and materials. Various options for width and coverage of the Spreader Rollers are available.  The Rooftop Equipment Spreader Rollers are recommended for use with the Better Spreader or Tank Spreader. ...

The RACE 4-wheel roof cart features a sturdy 30" x 60" bed frame with a load capacity of 2000 lbs. Perfect for transporting big loads and comes with a dead-man safety brake that engages when the handle is dropped or lowered. Choose between 18" Pneumatic Air-Filled Tires or 18" Flat Free Tires.  Features:  2,000 lbs. Capacity30" x 60" BedDrop handle brake Stake and pin pocketsOpen back frame for hoisting fork access Rear hitch and front pin hitch to connect and tow multiple...

An Applicator for pourable roofing materials like Bonding Adhesive, Cold Process and Coatings. 40" Width Accurately applies more than 300sq. ft. per minute No waste. Simply drain unused material back into the can Easily holds two buckets of material Different size holes accommodate a variety of liquids Durable polyethylene tanks allows easy clean up

An Applicator for pourable roofing materials like Bonding Adhesive, Cold Process and Coatings. 27" Width Accurately applies more than 300sq. ft. per minute No waste. Simply drain unused material back into the can Easily holds two buckets of material Different size holes accommodate a variety of liquids Durable polyethylene tanks allows easy clean up

Rooftop Equipment - Tank Spreader | Efficiently apply any pourable materials, such as low-VOC adhesives and coatings A gravity-fed, easy to use, low maintenance applicator for any pourable coating or adhesive material 14" Wide5-gallon tankGreat for jobs as small as 20 squares, while still efficient for up to 150 squaresSpreader of choice when productivity is limited to 3,000 square feet per dayAppropriate for both adhesives and coatingsAccommodates both flat Spreader Rollers and Profile...

Includes Shipping! The BetterSpreader makes adhered projects more efficient and contractors more profitable. This proven, simply quick adhesive dispenser has been designed to save you time and money - in two widths! Adhere single-ply fast: Adhesive dispensed directly from the can No tank or tray to clog or clean No valves or cranks causing messy overflow Double production over paint rollers Lightweight and compact Affordable Roller change in seconds Even and efficient spread of adhesive No end...

The BetterSpreader makes adhered projects more efficient and contractors more profitable. This proven, simply quick adhesive dispenser has been designed to save you time and money - in two widths! Adhere single-ply fast: Adhesive dispensed directly from the can No tank or tray to clog or clean No valves or cranks causing messy overflow Double production over paint rollers Lightweight and compact Affordable Roller change in seconds Even and efficient spread of adhesive No end of the day cleanup...

The RACE 2-Wheel Wheelbarrow is the roofer's choice for transporting and dumping of material and debris. It features an all-welded single steel frame, steel handles with ergonomic rubber grip, and a tray tip that is protected by a plate and a tubular steel frame for added stability in dumping large, heavy loads. The RACE wheelbarrow features standard dual flat-free tires. It is built to last and ready for any job. Features: 6 Cu. Ft. Capacity Heavy-Duty tubular steel frameSkid plate...

Features: Self adjusting drop handle brake Stake pockets for channels Pin pockets for rolled goods Open back frame for hoisting fork access Rear hitch and front pin hitch to form train Specifications: 2000 lb capacity 30" x 60" bed 2" channel frame 1" axles 4 - 18 x 850 wheel assemblies with 1" roller bearing Shipping weight: 195 lbs ...

Easily moves all types of material Large wheels distribute weight evenly over large area Designed for one man to move up to 800 lbs.

Save time and headaches: simply grip the material, stretch the material tight, easily apply fasteners to tack weld while creating a clean and professional finish Eliminates single-ply ripples Efficient and cleaner TPO/PVC fastener installation and membrane welding. A wide gripping mechanism allows the Cleasby material stretcher to be utilized with all sizes of membrane material

Features: Tough Metal HeadHandle NOT Included

All steel round tubing frame Economically priced Nose plate reduces surface damage 6 cubic foot capacity tray Use 18 x 850 x 8 tires or 400 x 480 x 8 tires

The RACE Fork Cart is designed to move roof insulation, plywood, ISO Boards, and other large sheet material of several hundreds of pounds (over 800). The oversized pneumatic tires help distribute the weight and maximize load efficiency on-ground or on-deck with the least amount of effort by the user. Forks fold upward and lock in place for easy transportation and storage!  Easily moves all type of material Large wheels distribute weight evenly over large area Great for...

The Manual Push Rhino was designed for rapid removal of old built-up roofing and insulation materials. To loosen the material simply place the blade under the old roof and press down on the handles. Features: An all steel frameHeavy duty constructionHardened steel blade6" steel wheels

Helper wheels only, Fork Cart sold separately, see related items belowTraining wheels adjust for easy control Heavier loads are moved with little effort

Features:Dumper tray mounts and dismounts quicklyDesigned for one man to dump full loadLarge wheels and extended rear axle provides extra stability and safetyDimensions : 36 in. x 60 in. x 18 in.Capacity : 22.5 cu. ft.

For lightweight decks (6) rollers 12" apart, evenly distribute weight on roof deck 500 lb. load capacity Heavy duty construction / Steel frame Ball bearings on each end of rollers allow easy movement 24" frame width

Single Ply Roll Carrier• make easy work of unrolling single ply or moving rolls around jobsite• consists of two double wheeled handles and one 13’ stabilizing tube• the stabilizing tube’s rotating feature permits easy, controlled unrolling and the double wheeled handles allow for easy maneuverability of even the biggest rolls

A Gravity Fed, Foam Insulation Adhesive Spreader Same Concept as The Better Spreader. Applies 4 Even Beads of Adhesive on Either Steel or Concrete Decking, at Prescribed Coverage Rates. The wheels can be adjusted to straddle a steel roof deck's flutes Low maintenance Unused adhesive can be drained from the tank for later use Smooth polyethylene tank allows easy cleaning Exchangeable 12 Gal. tank Adjustable wheel alignment 39 1/2" wide ...

Spreads gravel evenly across 36" as quickly as an operator can walkOne simple adjustment sets up gravel flow; one lever provides positive open and close feed controlAdapts to all contemporary graveling applications3 large wheels provide the ultimate in maneuverability and stabilityTubeless pneumatic tires and semi-pneumatic tires make it easy to handleCapacity = 5 1/2 cubic feetHandles Pea Gravel  ...

Rooftop Equipment - Bead Applicator | Designed By Roofers - For Roofers A Gravity Fed, Foam Insulation Adhesive Spreader Same Concept as The Better Spreader. Applies 4 Even Beads of Adhesive on Either Steel or Concrete Decking, at Prescribed Coverage Rates. The wheels can be adjusted to straddle a steel roof deck's flutes Why choose a Bead Applicator? Increases productivity with somple-to-use, gravity-driven application of adhesives Eliminates clean-up hasssles Reduces waste with factory-set,...

Spar Marathon 55-Gallon Insulated Tank w/ Drain Cock Complete insulation wrap maintains asphalt at the correct application temperature. The quick change channel irons will securely support this tank to a utility or 4-wheel cart. * PLEASE NOTE. 4-Wheel Cart & Channel Irons shown are Not Included* ...

Roofer’s Best Friend: Heavy-Duty Roll Carriers Features Designed for Roofing Professionals: Effortless Handling: Roofers deal with rolls of various widths—our carriers are up to the task. Whether it’s roofing felt, underlayment, or TPO membrane, these carriers handle it all. Safety at Heights: Roofing work often involves heavy materials. Our carriers are engineered to safely handle those hefty rolls. Teamwork Amplified: Roofing is a team effort. With a four to eight person carrying...

GATOR Husky Hauler XL is the most efficient and safet way to moce large amounts of materials across a roof deck. the 30" x 102" bed is made of 1/4"x2" angle iron. This unit has a large folding gate to prevent materials from falling on the operator. The lockable folding gate can be folded flat to enable trailer to be used as a regualr traler. can also be ordered without a gate. The Husky Hauler can carry up to 2,000 lbs. of material with ease. The 18-8.50 tires distribute load evenly on the 30”...

Used to carry various roofing material. Weighing only 40 lbs. this attachment transforms your buggy into a power jack. The Hydraulic/Mechanical Power Buggy is sold separately.

All aluminum construction for light weight. This unit is set for Metric (39") rolls. Use 5 or 7 square goods at a single pass. Includes control to apply a brake to one wheel while lifting the lower paper roller for easy threading of paper. Adjustable valve to be able to vary the amount of hot delivered to the deck. Asphalt valve at the rear so that the operator can watch for voids to eliminate potential leaks. Lids seal with silicone gasket to help reduce spilled asphalt. Note: Make sure there...

Features: For use on flat, level roofs onlyDo not operate without a perimeter warning line systemDo not operate within 10 feet of roof edge Roof edge martials handling areas must be protect workers from falls in accordance with OSHA Standards Section 1926.500Wheelbarrow must not be used for transporting hot material6 Cu. Ft. CapacityGravel net load is 300 lbs. when fully loaded 

Bucket Attachment for Power BuggyThis system option allows larger quantities of material to be transported in a single trip.

An attachable unit that evenly spreads gravel along the rooftop.Capacity: 7.6 cu.ft.Weight: 110 lbs (Spreader Only) 434 lbs (Attached)

Bucket Attachment for Power Buggy - LargeThe large bucket can be used with an optional Hydraulic Dumping System. This system option allows larger quantities of material to be transported in a single trip.Weight: 162 lbs (Bucket Only) 612 lbs (Attached)Dimensions: 47" x 36" x 24"

The Tuff Jack- Pallet Mover The ASE Tuff-Jack material mover allows the operator to move an entire pallet of material. When used with a hoist the materials can be loaded and positioned around the roof in record time. Forks: The Heavy-Duty forks are capable of lifting material up to 33" in the air, perfect for loading 4 wheel trailers or other carrying machines with the material. The forks also contain extensions allowing for 8 ft skids to be lifted with ease. Handle and Turning: The single...

ASE Manual Gravel Spreader Features: Adjustable gate to spread different thicknesses of pea gravel, max 2½ inches of ballast Standard Tires: Smooth Pneumatic 4.80 x 4.00 x 8 Holds 6 cubic feet of material 3 Wheel- Great maneuverability and easy to use Dimensions: 52"x36"x24" Weight: 100 lbs

All steel, heavy-duty designHas front and rear pin hitch hole and can be connected for towing multiple cartsStake with 4 pin pockets"T" handle for hand pullingDead man tow handle with drag brakeHeavy-duty all-welded jig built frameMain turning yoke has a 1" bolt that can be removed for serviceAxles are 1" cold roll solid steel with 1/8" cotter pins