Staging Roof Brackets

Metal Plus LLC brackets are essential tools in the roofing industry, designed to provide safety, efficiency, and versatility during the installation of standing seam metal roofs. Their unique patented design makes the bracket easy to use and their non-penetrating designs with the rubber pads to prevent scratching on metal roof panels make them an indispensable asset for roofing professionals. These brackets are especially effective for both mechanical standing seam and snap lock standing seam...

For use with a sound 2 x 6" plank. Place Brackets no more than 8 feet apart. Use all 4 nail slots. Capacity is one worker plus 40 lbs. of materials per 4' of scaffolding. Steel roof bracket for various pitches and plank sizes. 4 offset nail slots and back-stiffening rib to eliminate twists and flexing. Smooth edges and rounded corners will not cut hands or work area. Easy installation and removal without damaging shingles. DO NOT OVERLOAD! FEATURES For use with various pitches and plank...

The Johnny Jack Offset Roof bracket provides a walking surface on steep pitch roofs during installation of interlocking roofing materials such as metal shingles, tile, and other systems. A seven foot flat bar connects the walking plank bracket at the bottom with the nail slots at the top; features 5 ½ inch surface clearance. Used to install interlocking shingles where standard roof brackets cannot be used. FEATURES JohnnyJack’s design provides a better platform for staging materials on...

For use with a sound 2 x 6" plank. Place Brackets no more than 8 feet apart. Use all 4 nail slots. Capacity is one worker plus 40 lbs. of materials per 4' of scaffolding. DO NOT OVERLOAD! FEATURES For use with various pitches and plank sizes 4 offset nail slots (OSHA requires 3) that will not allow the bracket to slide up 6 long welds for strength Back-stiffening rib to eliminate twisting and flexing  Smooth edges and round corners that will not cut hands or work area Easy to set up,...

Features: 6-position locking adjustmentsConstructed of heavy duty galvanized steel10” platformCan be repositioned & taken down without damaging shinglesFolds flat for convenient storage and transportReplaceable 3-position tongueCapacity: 1 worker plus 40 lbs. per 8’ stagingMaximum 8’ spacing between bracket5/ Case

For use with a sound 2 x 4" plank. Place Brackets no more than 8 feet apart. Use all 4 nail slots. Capacity is one worker plus 40 lbs. of materials per 4' of scaffolding. Steel roof bracket for various pitches and plank sizes. 4 offset nail slots and back-stiffening rib to eliminate twists and flexing. Smooth edges and rounded corners will not cut hands or work area. Easy installation and removal without damaging shingles. DO NOT OVERLOAD! FEATURES For use with various pitches and...

For use with a sound 2 x 6" plank. Place Brackets no more than 8 feet apart. Use all 4 nail slots. Capacity is one worker plus 40 lbs. of materials per 4' of scaffolding. Steel roof bracket for various pitches and plank sizes. 4 offset nail slots and back-stiffening rib to eliminate twists and flexing. Smooth edges and rounded corners will not cut hands or work area. Easy installation and removal without damaging shingles. DO NOT OVERLOAD! FEATURES For use with various pitches and plank...

For use with a sound 2 x 4"or 2 x 6" plank. Place Brackets no more than 8 feet apart. Use all 4 nail slots. Capacity is one worker plus 40 lbs. of materials per 4' of scaffolding. DO NOT OVERLOAD! FEATURES For use with various pitches and plank sizes 4 offset nail slots (OSHA requires 3) that will not allow the bracket to slide up 6 long welds for strength Back-stiffening rib to eliminate twisting and flexing  Smooth edges and round corners that will not cut hands or work area Easy to set...

For use with a sound 2 x 6" plank. Place Brackets no more than 8 feet apart. Use all 4 nail slots. Capacity is one worker plus 40 lbs. of materials per 4' of scaffolding. Steel roof bracket for various pitches and plank sizes. 4 offset nail slots and back-stiffening rib to eliminate twists and flexing. Smooth edges and rounded corners will not cut hands or work area. Easy installation and removal without damaging shingles. DO NOT OVERLOAD! FEATURES For use with various pitches and plank...

Metal Plus LLC brackets are essential tools in the roofing industry, designed to provide safety, efficiency, and versatility during the installation of standing seam metal roofs. Their unique patented design makes the bracket easy to use and their non-penetrating designs with the rubber pads to prevent scratching on metal roof panels make them an indispensable asset for roofing professionals. These brackets are especially effective for both mechanical standing seam and snap lock standing seam...

10” adjustable platform 4-position platform: 30°, 45°, 60°, 90° Commercial grade 11-gauge steel construction Powder coat paint finish Rounded corners eliminate shingle damage Capacity: 1 worker plus 40 lbs. per 8’ staging Maximum 8’ spacing between bracket

RACE-RB-ADJ, 10” x 30°/45°/60°/90° ADJUSTABLE ROOFING BRACKET CAPACITY: One worker per 8 feet of scaffolding or up to 250 pounds of materials - No more than one person shall occupy any given 8 feet of a Roofing Bracket Scaffold - Use the walking surface to stage material and ease working on steep slope roofs. - Always use OSHA compliant fall arrest system, guardrails, catch platforms or other safety equip­ment as required by Local, State or Federal OSHA Regulation - Roof Brackets are intended...

For use with a sound 2 x 8" plank. Place Brackets no more than 8 feet apart. Use all 4 nail slots. Capacity is one worker plus 40 lbs. of materials per 4' of scaffolding. Steel roof bracket for various pitches and plank sizes. 4 offset nail slots and back-stiffening rib to eliminate twists and flexing. Smooth edges and rounded corners will not cut hands or work area. Easy installation and removal without damaging shingles. DO NOT OVERLOAD! FEATURES For use with various pitches and plank...

For use with a sound 2 x 8" plank. Place Brackets no more than 8 feet apart. Use all 4 nail slots. Capacity is one worker plus 40 lbs. of materials per 4' of scaffolding. DO NOT OVERLOAD! FEATURES For use with various pitches and plank sizes 4 offset nail slots (OSHA requires 3) that will not allow the bracket to slide up 6 long welds for strength Back-stiffening rib to eliminate twisting and flexing Smooth edges and round corners that will not cut hands or work area Easy to set up, operate,...

When choosing a Roofer’s Helper Bracket, consider factors such as the specific profile of your standing seam roof, the typical roof pitch you work with, and the weight capacity required. Metal Plus LLC is known for producing high-quality roofing tools, so their Roofer’s Helper Bracket is likely a reliable choice for professional roofers looking to improve safety and efficiency on the job. Designed to hold solar panels, skylights and chicken ladders in place on the roof Features & Benefits...

For use with a sound 2 x 4" plank. Place Brackets no more than 8 feet apart. Use all 4 nail slots. Capacity is one worker plus 40 lbs. of materials per 4' of scaffolding. Steel roof bracket for various pitches and plank sizes. 4 offset nail slots and back-stiffening rib to eliminate twists and flexing. Smooth edges and rounded corners will not cut hands or work area. Easy installation and removal without damaging shingles. DO NOT OVERLOAD! FEATURES For use with various pitches and plank...

For use with a sound 2 x 10" plank. Place Brackets no more than 8 feet apart. Use all 4 nail slots. Capacity is one worker plus 40 lbs. of materials per 4' of scaffolding. Steel roof bracket for various pitches and plank sizes. 4 offset nail slots and back-stiffening rib to eliminate twists and flexing. Smooth edges and rounded corners will not cut hands or work area. Easy installation and removal without damaging shingles. DO NOT OVERLOAD! FEATURES For use with various pitches and plank...

RACE-RB-F-6-90, 2" X 6” x 90° x 18" long FIXED ROOFING BRACKET On roofs with a 4/12 to 6/12 roof pitch, when in­stalled as a slide guard, the scaffold brackets should provide a platform that is 90 degrees to the roof’s sur­face at a point along the eave of the roof. For roof slopes greater than 6/ 12 up to 8/12 additional 90-degree slide guards must be installed par­allel to the first row no further than every eight feet of roof slope. Ad­ditional fall protection methods are required...

Are you dissatisfied with the anchor points currently on the market, which cause serious damage to the standing seam panels with their primitive and cumbersome design? Some gouge the panels, and others are limited to a few panel profiles! Metal Plus LLC has revolutionized the industry of anchor points, with their well-designed and engineered Universal Safety Anchor! Previous anchor points are now obsolete by eliminating the following problems: No More- Adjusting set screwsReplacing...

RACE-RB-F-8-45, 8” x 45°x 19" long FIXED ROOFING BRACKET, FOR USE ON 12/12 PITCH ROOFS. CAPACITY: One worker per 8 feet of scaffolding or up to 250 pounds of materials - Only for use on roofs - Always use fall protection in accordance with local, state and federal OSHA regulations - Not an anchor point - Roof brackets are meant for use by experienced tradesmen having full knowledge in its use - OSHA regulations require that the employer provide training in the use and care of this product ...