Caulks, Adhesives, & Sealants

M-1 is a moisture curing, polyether adhesive/sealant designed for application in damp, dry, or cold climates. M-1 is solvent free and contains no isocyanates. M-1 will not shrink upon curing, will not discolor when exposed to UV light, and can not "out-gas", or bubble, on damp surfaces as urethane sealants often do. M-1 has resilient "elastomeric" properties and excellent adhesion to most construction materials. M-1 is capable of joint movement in excess of 25% in both compression and...

10 oz. Tube. EternaCaulk is a high-performance, multipurpose, thermoplastic elastomer based sealant. It can be applied to dry or wet surfaces. EternaCaulk provides excellent adhesion to most roof surfaces, including metal, Kynar coated metal, asphalt, shingles, modified bitumen, EPDM, TPO, Elvaloy/PVC, hypalon, vinyl, fiber cement, wood, concrete, tile, masonry, and glass. EternaCaulk meets all federal standards for health and environmental safety.

Duralink is an extremely elastic moisture curing sealant designed for use on metal substrates, curtain wall constructions and joints subject to very high movement. Duralink has +/-50% joint movement. Duralink is thermosetting and adheres tenaciously to metal surfaces, most engineering plastics and difficult to bond painted substrates.  Advantages 100% VOC compliant Bonds to PVDF coated metalSolvent Free100% Solids, will not shrinkNon-Slump, applies vertically and overhead30 minute...

NovaLink is a moisture curing, polyether, elastomeric joint sealant designed for application in damp, dry or cold climates. NovaLink is solvent free and contains no isocyanates. NovaLink will not shrink upon curing, will not discolor when exposed to UV light, and can not "outgas" or bubble on damp surfaces as urethane sealants often do. NovaLink has excellent adhesion to most construction materials and resilient elastomeric properties. NovaLink is capable of joint movement in excess of 35%...

Lucas #9600 Joint & Termination Sealant is a 100% solids non-shrinking moisture cure urethane sealant intended for sealing large joints and roof termination bars. Minimal odor, contains no solvents and less than 10 grams per liter VOC. Excellent adhesion to concrete, masonry, EPDM, PVC, wood, vinyl and most other common building materials. APPLICATION To use this product cut the tip to the desired size and puncture the foil seal. Small orifice size and/or an incompletely punctured seal may...

Clear is a moisture curing, polyether sealant designed for application in damp, dry, or cold climates. Clear is solvent free and contains no isocyanates. Will not shrink upon curing and will not discolor when exposed to UV light, and can not "out-gass" or bubble on damp surfaces as urathane sealants often do. Clear has resilient "elastomeric" properties and excellent adhesion to most construction materials. Clear is capable of joint movement in excess of 25% in both compression and extension....

Lucas #6600 Universal Sealant is a high performance, multipurpose thermoplastic elastomer based sealant. Excellent adhesion to most surfaces including: metal, Kynar®, asphalt, shingles, modified bitumen, EPDM, TPO, Elvaloy/PVC, Hypalon, vinyl, fiber cement, wood, concrete, tile, masonry, glass. #6600 is available in clear, black, white and various colors (see reverse). Ideal for residential roofing applications where appearance is important. * Non-Standard colors available. Please view chart...

1-Part is a moisture curing, pourable sealant designed for use in pitch pans and warranted chem curb penetrations seal, suitable in damp, dry, or cold climates. Part-1 is solvent free, contains no Isocyanates and will not shrink upon curing. Can not " out gas" or bubble on damp surfaces as urathane sealants often do. 1-part has resilient "elastomeric" properties and excellent adhesion to most construction materials. It can be used effectively in many difficult construction site conditions and...

High-performance, multipurpose thermoplastic elastomer based sealant for metal seams, metal roofing, siding, window frames, door frames, vinyl windows, Flashings etc on all types of roof membranes. Excellent adhesion to most surfaces including: metal, Kynar, asphalt, shingles, modified bitumen, EPDM, TPO, Elvaloy, PVC, Hypalon, vinyl, fiber cement, wood, concrete, tile, masonry, glass. Use to seal flashings and penetrations on all types of roofs or general leak repairs. Packaged in 10.1 oz....

1-Part is a moisture curing, pourable sealant designed for use in pitch pans and warranted chem curb penetrations seal, suitable in damp, dry, or cold climates. Part-1 is solvent free, contains no Isocyanates and will not shrink upon curing. Can not " out gas" or bubble on damp surfaces as urathane sealants often do. 1-part has resilient "elastomeric" properties and excellent adhesion to most construction materials. It can be used effectively in many difficult construction site conditions and...

OlyBond500 SpotShot is a fast-acting, dual-component, low-rise polyurethane foam adhesive designed to attach insulation to roof decks. SpotShot is dispensed through a portable 1:1 applicator and is perfect for crickets, smaller roofs, hard to reach areas, and repairs. SpotShot does not create any odors or noise that might disturb building occupants. Packaged in a box of (4), 1,500 ml cartridge sets.

Pro Pack is a two-component, RTV, urethane pourable sealant. It is designed for use to fill warranted ChemCurb penetration seals & pitch pans on low-slope roofing systems. It can also be used in horizontal self-leveling, sealing and waterproofing applications. When properly mixed, Pro Pack cures to a tough rubber mass with excellent low temperature elasticity and adhesion. Pro Pack resists deterioration caused by weather, water and ice. It is also resistant to oils, fuels, and many chemicals....

F1263 ChemLink DuraLink 35 Multi-Purpose Sealant White 10.1oz Cartridge. ChemLink DuraLink 35 is a multi-purpose, moisture cure, elastomeric sealant that combines economy and high performance. DuraLink 35 has excellent elastomeric properties which is ideal for a wide range of applications including difficult surfaces such as Kynar 500%u00AE PVDF and other anodized metals and coatings. DuraLink 35 is isocyanate free, paintable and SWRI validated for %u00B1 35% joint movement.Bonds to Kynar...

DuraSil is a highly flexible silicone adhesive/sealant/caulk designed for 50% joint movement that can handle very low to high temperature extremes. It bonds to difficult surfaces quickly. Use on glass, aluminum, steel, masonry, polycarbonate, vinyl (PVC), fiberglass (FRP), acrylic, Kynar 500 PVDF, Tedlar PVF, coated metals and concrete. We stock DuraSil in white and translucent. This product contains no biocides or fungicides. It is ultra-low odor when wet and no odor once cured. The white...

1-Part is a moisture curing, pourable sealant designed for use in pitch pans and warranted chem curb penetrations seal, suitable in damp, dry, or cold climates. Part-1 is solvent free, contains no Isocyanates and will not shrink upon curing. Can not " out gas" or bubble on damp surfaces as urathane sealants often do. 1-part has resilient "elastomeric" properties and excellent adhesion to most construction materials. It can be used effectively in many difficult construction site conditions and...

OlyBond500 Canisters are an easy-to-use, equipment free, option for applying OlyBond500 Adhesives. The Canisters have all of the same Factory Mutual approval ratings as our other OlyBond500 options, and can be used for securing both insulation and fleece backed membrane. Features & Benefits OlyBond500 Canisters offer fast start-up and shut down for improved rooftop productivity.OlyBond500 Canisters can provide up to 20% more coverage and up to 35 squares per set for insulation attachment,...

502MS Karna-Flex is an elastomeric, thermoplastic-rubber sealant formulated for use on built-up asphalt roofs, modified bitumen membranes and properly prepared metal, concrete, EPDM, TPO, and most PVC membrane as well as spray polyurethane foam and plywood roof substrates. Its ease of application, superior adhesion, elasticity and durability make 502MS Karna-Flex an ideal repair sealant. Available in a brush mastic or caulking cartridge. COLORS: White, Black and Gray Uses: 502MS Karna-Flex’s...

Lucas #8500 Silicone Sealant (1 Gallon) is a high solids non-shrinking moisture cure silicone sealant intended for sealing and repairing roofs, masonry, architectural metal, and metal roof seams & fasteners. #8500 has minimal odor, contains no solvents, and is less than 10 grams per liter VOC. Use to seal penetrations and terminations prior to application of Lucas #8000 100% Silicone Roof Coating (not included in this order), Excellent adhesion to concrete, masonry, polyurethane foam, EPDM,...

This silicone sealant is non-flammable and designed to withstand high temperatures. It meets VOC compliance standards, making it suitable for a variety of applications, including heating systems, furnaces, automotive uses, and HVAC systems. The sealant remains resistant to UV exposure, extreme cold, and moisture. It is also approved by the USDA. With a tensile strength of 350 psi, this product offers durability and reliability. Avoid using it on galvanized metal or galvalume surfaces. For...

502MS Karna-Flex is an elastomeric, thermoplastic-rubber sealant formulated for use on built-up asphalt roofs, modified bitumen membranes and properly prepared metal, concrete, EPDM, TPO, and most PVC membrane as well as spray polyurethane foam and plywood roof substrates. Its ease of application, superior adhesion, elasticity and durability make 502MS Karna-Flex an ideal repair sealant. Available in a brush mastic or caulking cartridge. Uses: 502MS Karna-Flex’s elastomeric properties make it...

M-1 CR (Clean Room) is a thermosetting, moisture-cure sealant, free from solvents and isocyanates. It has been tested and approved for use in semiconductor clean rooms due to its minimal release of airborne molecular contamination at room temperature once fully cured. M-1 CR is ideal for clean rooms in the biomedical, electronics, and aerospace industries where air and surface contamination must be strictly controlled. Additionally, it is suitable for use in food processing facilities,...

155 Amphibikote is a high-performance, emergency roof cement specifically engineered with water displacement properties to create a strong bond on both wet and dry surfaces. Its unique ability to adhere even during adverse weather conditions makes it the top choice for roofing contractors and plant engineers alike. Whether it's an emergency repair or planned maintenance, 155 Amphibikote offers superior flexibility and durability. This roof cement is composed of carefully selected asphalts,...

NovaLink™ FP is a premium, moisture-curing elastomeric sealant and waterproofing solution designed to fill, seal, and level grout lines, voids, seams, and surface damage on construction materials before applying liquid waterproofing. It can also be used to repair roof leaks, asphalt shingles, roof valleys and seams, chimney flashings, and for emergency roof repairs.

MetaLink is a versatile neutral cure silicone construction and roof sealant, specifically formulated for use in various job site conditions. It is UV resistant and compatible with many building materials, including galvanized aluminum, metal, Kynar 500 PVDF coated metal, glass, and most roofing materials. MetaLink comes in a wide range of colors to match contemporary metal roof and siding products. It is isocyanate-free and validated for ± 50% joint movement.

DuraSil SL is a neutral oxime cure silicone sealant intended for use in pitch pans and warranted E-Curb penetration seals. It is designed for high-temperature applications, withstanding temperatures up to 400°F (204°C). Its low durometer and resilient “elastomeric” properties allow it to handle significant movement in penetration seals. Additionally, DuraSil SL is solvent-free, contains no isocyanates, and does not shrink during curing.

DuraGlaze Plus/ DuraGlaze Tint Base is a high-quality, extremely elastic, high-performance, moisture-cure sealant ideal for fenestrations, perimeter sealing (windows, doors, and panels), metal architecture, curtain wall construction, and joints subject to movement. With an extended tack-free time in elevated temperatures, DuraGlaze Plus is perfect for any project. It adheres to difficult-to-bond surfaces and is suitable for use on anodized metal and coatings like Kynar 500® PVDF. Its unique...

DuraGlaze Plus/ DuraGlaze Tint Base is a high-quality, extremely elastic, high-performance, moisture-cure sealant ideal for fenestrations, perimeter sealing (windows, doors, and panels), metal architecture, curtain wall construction, and joints subject to movement. With an extended tack-free time in elevated temperatures, DuraGlaze Plus is perfect for any project. It adheres to difficult-to-bond surfaces and is suitable for use on anodized metal and coatings like Kynar 500® PVDF. Its unique...

160.1 Amphibicaulk is a high-performance, caulking-grade roof cement specifically designed for sealing and waterproofing, even in adverse weather conditions. Its advanced water displacement characteristics ensure an effective bond on both wet and dry surfaces, making it the preferred choice for roofing contractors and plant engineers. Composed of selected asphalt, mineral fillers, refined solvents, and special chemical additives, 160.1 Amphibicaulk delivers superior flexibility and durability....

671 Karna-Seal is a single-component, moisture curing, 100% silicone roof sealant that offers excellent UV resistance, flexibility, and tensile strength. 671 Karna-Seal resists weathering, hardening, chalking, and cracking. Advantages Resists permanent ponding water Application by brushBonds to several different roof substratesLow VOC, low odorFor horizontal and vertical use, will not sagRain safe in one (1) hourReady to use, no mixing of componentsUV stable, may be left exposedExcellent...

Features: Excellent adhesionMoisture-resistant24 hour cureOne-partHigh-strengthPaintableSuperior tooling Benefits:  Bonds to most substrates without primingMaintains bond in wet and moist conditionsEasy applicationDurable bond to substrate Industries: AutomotiveHVACManufacturingHighway Safety Substrates: SteelAluminumGalvanizedGalvalumeLaminatesFiberglassPlasticsCementWood Limitations: Not recommended for solvent sensitive plastics and foams, polystyrene or styrene ontaining...

Flexible, One Part, Easy to Remove, Elastomeric, Butyl Rubber Sealant. Excellent for resealing and repairing leaks. Benefits: Easy to removeAllows for movement of dissimilar materialsBonds to substrates without primingMinimizes dust pickup Features:  Stays soft and malleableFlexibleExcellent adhesionFast-skinningNon-stainingOne-part Industries:  ConstructionArchitecturalManufacturingRV Repair Substrates: GlassMetalWoodConcreteCementMasonryPlasticsFiberglassRubber material...

High-Quality, Ready to Use, 100% RTV neutral cure silicone sealant with enhanced adhesive qualities, particularily with hard to stick plastics and PVC. Primerless, Non-Corrosive, and UV Stable. Features: Excellent Adhesion 24 Hour Cure 100% RTV Silicone One-part Primerless Low Modulus Benefits: Ideal for exterior trim and siding Adheres to many porous substrates Durable bond to plastics and PVC Low odor Industries: Glazing Construction Manufacturing Automotive Aircraft Substrates: Wood PVC...

One Component RTV, Acetoxy cure silicone sealant and adhesive chemically formulated for high strength adhesion. When fully, this unique VOC compliant formula, offers UV stability and excellent adhesion to form waterproof and airtight bonds. Features and Benefits: High StrengthExcellent WeatherabilityUV StableNon-YellowingVOC CompliantNon-FlammableWaterproofExcellent AdhesionNon-Shrinking Applciations: Sealing & GlazingHVAC/RPlumbingKitchen & BathSanitary SealsPrecast ConcreteAppliance...

Versatile, high-strength, hard setting, one part adhesive sealant. Superb 2000 PSI, tensile strength with excellent impact resistance. Water and weather proof. Ideal alternative when mechanical fasteners can not be used. Features: High-strengthFlexibleExcellent memoryHard-settingOne-part Benefits: Durable bond to materialAllows for movement of dissimilar materialsDoes not become brittlePick-proofEasy applicationLong service lifeMinimizes dust pickupEasy to match substrate Industries: ...

Premium, high - temperature, one component RTV acetoxy cure silicone sealant and adhesive. When fully cured, this unique VOC compliant formula offers tenacious adhesion to form waterproof and airtight bonds to materials in high temperature scenarios. Features and Benefits: High Temp PerformanceExcellent WeatherabilityUV StableNon-YellowingVOC CompliantNon-FlammableWaterproofExcellent AdhesionNon-Shrinking Applications: Sealing & GlazingHVAC/RPlumbingRoofingKitchen & BathFurnace/FireplaceFlues...

Water resistant adhesive designed for singly-ply roofing systems. Excellent open time with high tack.FeaturesFlexibleHigh-tackGood open timeMoisture-resistantPaintableInsulatesOne-partBenefits:Allows for movement of dissimilar materialsEnsures weather-tight sealExtended working timeMaintains bond in wet and moist conditionsEasy to match substrateIndustries:ConstructionArchitecturalManufacturingSubstrates:WoodMetalMasonryInsulationsGalvanized FlashingsPainted Materials ...

OlyBond500 is a fast acting two component, low-rise polyurethane foam adhesive designed to adhere most insulation types to a wide selection of common roof decks and materials. OlyBond can be used in both New and Re-roofing applications, including applications that require multiple insulation layers. Features: Non-penetrating attachment systemOdor free – excellent for sensitive areas, such as schools, office buildings and hospitalsUltra low VOC meets all local and federal regulationsReduces...