S-5! Snow Guard /Snow Retention Systems

Available for purchase separately, VersaClip™ makes installation easy, as it simply slides on the ColorGard® crossmember. It can be used with all S-5!™ clamps (one per clamp), and is optional with CorruBracket™. VersaClip™ is not needed with VersaBracket™. VersaClip™ is also handy when installing ColorGard® askew, such as is required in the valleys between intersecting rooflines. ...

>Unpunched ColorGard is the most versatile and easy to install, when used with the S-5! VersaClip. Unpunched does not need holes, as the VersaClip accommodates any seam spacing. The unpunched configuration works well with VersaBracket.  Unpunched is the right choice when the roof is laid out with untrue seam width or when the seam width is not divisible by 4. If in doubt, use unpunched. Included with crossmembers, use the Splice to join two pieces of ColorGard together, ensuring...

Punched ColorGard® is slotted every 4” (10.2 cm) on center for seams that are spaced accordingly, i.e. divisible by 4” (10.2cm). The slotted configuration works well with S-5!™ clamps.  

SnoClip™ is an aluminum add-on that helps retard the migration of snow and ice beneath either the ColorGard® crossmember, or the SnoRod™ of a SnoRail™ or SnoFence™ system. It has a special integrated rubber "foot" to prevent abrasion of the panel's finish. SnoClip™ snaps to the back of the crossmember or rod and extends down to the flat of the roofing panel.

S-5 VersaGard is used to accommodate various rib heights and support one or two height preferences. VersaGard can be installed Parallel (for Snow Retention or PV Installations) or Perpendicular to the rib (for PV Installations). VersaGard comes with a factory-applied butyl sealant on the base, and the S-5 patented reservoir conceals the sealant from UV exposure, preventing drying and cracks. Compatible with most metal roofing materials, the VersaGard has been tested for load-to-failure results...

These aluminum clamps are designed to fit either vertical or horizontal seam profiles (rotating 90º) having a finished seam (thickness) dimension of .40" or less. The clamp is specially designed for versatility on a variety of standing panel seams and profiles - both architectural and structural.

The S-5-AE™ clamp and SnoPost E™ are used at the rate of one per 50' of assembly, and at the ends of the assembly to "fix" the SnoRod™, preventing lateral movement.

An important component in S-5! ColorGard snow retention systems, the SnapClip is designed to prevent ice that forms on the metal panel's surface from sliding under the ColorGard assembly. Usually only required on the bottom row of ColorGard, the SnapClip features a rubber foot that prevents scratching or damage to the roof panels surface. The SnapClip is designed to be "snapped" onto the ColorGard cross-member after installation, therefore can be retrofit on in-place systems. One (1) SnapClip...

S-5! DualPipe is a 1" diameter aluminum tube with a 1/8" wall engineered to work perfectly with the DualGard snow retention system, but can also be used with any other that requires a 1" pipe, including VersaGard.Comes in standard 92" lengths.DualGard Splices are included with DualGard Pipe.Other components required: Two (2) mini seam clamps per DualGard BracketDual Collar & EndcapDualGard Bracket Other components recommended: DualClip II or DualClip III DualGard Two-Pipe SystemVersatility,...

An important component in ColorGard snow retention systems, the SnapClip is designed to prevent ice that forms on the metal panel's surface from sliding under the ColorGard assembly. Usually only required on the bottom row of ColorGard, the Snap-Clip features a rubber foot that prevents scratching or damage to the roof panels surface. The SnapClip is designed to be "snapped" onto the ColorGard cross-member after installation, therefore can be retrofit on in-place systems. One (1) SnapClip is...

The stainless SnoPost™, when threaded into the clamp, provides for the addition of a second SnoRod™ about 2” above the first. This double rod configuration is called "SnoFence™", and is more durable for heavier service load conditions.

The S-5! DualGard Bracket works with a variety of clamps and offers superb lateral system stability as part of the most versatile and durable two pipe snow guard system on the market. The DualGard Bracket bolts directly to two (2) mini seam clamps with are then fastened securely to the metal roof panel rib with stainless steel setscrews. DualGard Bracket is a rigid aluminum component that is compatible with most any metal roof panel material (except copper), resists corrosion, can be installed...

The 8' NEX-2.0 pipe for X-Gard snow retention systems is a special tubular extrusion that offers light weight (0.56lbs per foot) and superior strength.This is the best option for both the X-Gard 1.0 and X-Gard 2.0 Brackets. Splices are included!

Dual Collar & DualGard Endcaps are sold in sets of 4: Each set contains four (4) Dual Collars & four (4) Endcaps. DualGard End caps are sized to fit snugly into the end of DualGard Pipes for a clean, finished look. DualCollar locks the DualPipe in place. One is required for each end of the assembly, so for every end cap you will also need a DualCollar. Stainless Steel Other components required: Two (2) mini seam clamps per DualGard BracketDualPipeDualGard Bracket ...

The X-Gard endcap fits snugly over the end of the NEX 2.0 X-Gard pipe to keep vermin, rain and debris out of the system. One cap is need for each open end of the pipe.Durable black vinyl material.

X-Gard brackets are a key component of the X-Gard snow retention system. The X-Gard bracket is mechanically attached to S-5! mini or regular seam clamps which are in turn fastened to the roof panel with patented round-point setscrews, gripping the seam securely without penetration and without damage to the panel s protective finishes. X-Gard brackets are available in two simple designs: X-Gard 1.0 Bracket. For use with a single pipe system, the X-Gard 1.0 bracket requires one (1) S-5! mini or...

S-5-FA Flanged Mini ClampsIf the metal roof profile isn’t compatible with any of the other S-5 flanged clamps, the Utility System can utilize the S-5-FA (flange adaptor) to quickly provide a flanged component to any of the other S-5! mini clamps, such as the S-5-N Mini for 1″ nail-strip profiles and the S-5-T Mini for T-shaped profiles. NOTE: Top Mounting bolt is not included. Order DualGrip Strut Nut 24000087 separately. Weight: 1.12 oz  Dimensions: 1x1x3 ...

The DualClip II fits S-5! DualGard snow guard/snow retention systems and is designed to prevent accumulated ice-dams from sliding under the snow guards uncontrolled. DualClip II is designed to be used on roof panels with seam heights of 1″ to 1-1/2″. If your panel seam is taller you should use DualClip III this DualClip is designed to be used on roof panels with seam heights of 1-3/4″ to 3-1/4″. Manufactured from quality aluminum with a soft rubber foot on the bottom to prevent...

Designed exclusively for the X-Gard snow retention system from S-5!, the X-Clip II & X-Clip III are optional components that can be added to your X-Gard 1.0 or X-Gard 2.0 system to further retard the migration of snow down the roof. X-Clip has a special integrated rubber foot to prevent abrasion of the roof panels finish. The X-Gard rests on the back of the NEX 2.0 Pipe and extends down to rest on the flat of the roof panel. X-Clip II is used on roof panels with seam (rib) heights of 1" to...

Designed exclusively for the X-Gard snow retention system from S-5!, the X-Clip II & X-Clip III are optional components that can be added to your X-Gard 1.0 or X-Gard 2.0 system to further retard the migration of snow down the roof. X-Clip has a special integrated rubber foot to prevent abrasion of the roof panels finish. The X-Clip rests on the back of the NEX 2.0 Pipe and extends down to rest on the flat of the roof panel. X-Clip II is used on roof panels with seam (rib) heights of 1"...