Snips

Offset models in three blade patterns keep user's hand above material being cut and flow material away from blades for ease of cut. They have the capacity of cutting 18 ga. cold-rolled sheet metal and 22 ga. stainless steel sheet metal. Left Cut - Cuts straight and tight left curves

Offset models in three blade patterns keep user's hand above material being cut and flow material away from blades for ease of cut. They have the capacity of cutting 18 ga. cold-rolled sheet metal and 22 ga. stainless steel sheet metal. Right Cut - Cuts straight and tight right curves

Get a better grip with Malco’s AV Aviation Snips! Malco’s AV Aviation Snips feature POWER-FIT™ performance hand grips that increase productivity and distributes pressure evenly, which results in less user fatigue. Non-slip grooves and safety guards also help users achieve a Maximum grip in some of the dirtiest conditions. An easy release side latch offers quick operation and cutting on the job. Made with only the best, the hardened forged steel jaws offer a strong long lasting cutting edge....

Get a better grip with Malco’s AV Aviation Snips! Malco’s AV Aviation Snips feature POWER-FIT™ performance hand grips that increase productivity and distributes pressure evenly, which results in less user fatigue. Non-slip grooves and safety guards also help users achieve a Maximum grip in some of the dirtiest conditions. An easy release side latch offers quick operation and cutting on the job. Made with only the best, the hardened forged steel jaws offer a strong long lasting cutting edge....

Malco’s Max2000 Aviation Snips are made in the USA and available in left, right, and combination cutting options. These snips feature Euro-styled ergonomic handles. Textured, solid-colored, molded thermoplastic grips and finger stops compliment a narrow handle opening to fit large or small hands. An ambidextrous, thumb-operated handle latch and replaceable compression spring complete this user-friendly design. All of Malco’s Max2000 Aviation Snips feature superior hardened blade edges for...

Cuts 20 ga. cold, 24 ga. stainless steel

Regular models in three blade patterns, with both top and bottom serrated blades. They have a capacity of cutting 18 ga. cold-rolled sheet metal and 22 ga. stainless steel sheet metal. Straight Cut - Cuts straight and wide curves to the left and right

Regular models in three blade patterns, with both top and bottom serrated blades. They have a capacity of cutting 18 ga. cold-rolled sheet metal and 22 ga. stainless steel sheet metal. Left Cut - Cuts straight and tight left curves

Regular models in three blade patterns, with both top and bottom serrated blades. They have a capacity of cutting 18 ga. cold-rolled sheet metal and 22 ga. stainless steel sheet metal. Right Cut - Cuts straight and tight right curves

The revolutionary, and patent pending, right angle handle to blade design provides tool users significant ergonomic improvements compared to conventional snips. In tests funded by NIOSH, and conducted at a major university lab, Upright Snips required less effort to make sheet metal cuts in common applications, and provided a more comfortable and ergonomic grip. Makes cutting easier by not breaking or bending the wrist Makes cutting easier in confined areas (in ductwork, reaching through an...

Malco’s Max2000 Aviation Snips are made in the USA and available in left, right, and combination cutting options. These snips feature Euro-styled ergonomic handles. Textured, solid-colored, molded thermoplastic grips and finger stops compliment a narrow handle opening to fit large or small hands. An ambidextrous, thumb-operated handle latch and replaceable compression spring complete this user-friendly design. All of Malco’s Max2000 Aviation Snips feature superior hardened blade edges for...

Get a better grip with Malco’s AV Aviation Snips! Malco’s AV Aviation Snips feature POWER-FIT™ performance hand grips that increase productivity and distributes pressure evenly, which results in less user fatigue. Non-slip grooves and safety guards also help users achieve a Maximum grip in some of the dirtiest conditions. An easy release side latch offers quick operation and cutting on the job. Made with only the best, the hardened forged steel jaws offer a strong long lasting cutting edge....

Cuts up to 20 gauge cold roll Blade Length = 3" Overall Length = 11 1/2"

The forged steel jaws of these left-cutting or right -cutting snips are set at a 90-degree angle to allow easy gripping when cutting sheet metal in tight spaces or overhead. The operator can follow tight circular or square pattern left or right cuts with either a pushing or pulling motion. A serrated edge on the upper jaw and compound head-to-handle linkage provide powerful, non-slip leverage for cutting up to 24-gauge (0.61 mm) cold rolled steel or 28-gauge (0.38 mm) stainless. Handles...

For Extra Long Cuts, Short Notch Cuts Cut thin, thick or multiple thicknesses of sheet materials Cutting length: 7/8" Capacity :16 gauge cold, 18 ga. Stainless steel

Get a better grip with Malco’s AV Aviation Snips! Malco’s AV Aviation Snips feature POWER-FIT™ performance hand grips that increase productivity and distributes pressure evenly, which results in less user fatigue. Non-slip grooves and safety guards also help users achieve a Maximum grip in some of the dirtiest conditions. An easy release side latch offers quick operation and cutting on the job. Made with only the best, the hardened forged steel jaws offer a strong long lasting cutting edge....

Malco’s Max2000 Aviation Snips are made in the USA and available in left, right, and combination cutting options. These snips feature Euro-styled ergonomic handles. Textured, solid-colored, molded thermoplastic grips and finger stops compliment a narrow handle opening to fit large or small hands. An ambidextrous, thumb-operated handle latch and replaceable compression spring complete this user-friendly design. All of Malco’s Max2000 Aviation Snips feature superior hardened blade edges for...

Get a better grip with Malco’s AV Aviation Snips! Malco’s AV Aviation Snips feature POWER-FIT™ performance hand grips that increase productivity and distributes pressure evenly, which results in less user fatigue. Non-slip grooves and safety guards also help users achieve a Maximum grip in some of the dirtiest conditions. An easy release side latch offers quick operation and cutting on the job. Made with only the best, the hardened forged steel jaws offer a strong long lasting cutting edge....

With an overall length of only 7-1/8 inches (181 mm), the AVsMini easily goes to work in tight or awkward spaces where full-size aviation snips are challenged. A 3/4 inch (19 mm) length of cut provides the optimum speed for confined cutting applications where this small, maneuverable snip excels. Each snip is made with forged steel jaws that contain precision-ground serrations on the lower blade, which produces a sharply defined edge for cutting accuracy and control. The AVsMini AVM6 left...

With an overall length of only 7-1/8 inches (181 mm), the AVsMini easily goes to work in tight or awkward spaces where full-size aviation snips are challenged. A 3/4 inch (19 mm) length of cut provides the optimum speed for confined cutting applications where this small, maneuverable snip excels. Each snip is made with forged steel jaws that contain precision-ground serrations on the lower blade, which produces a sharply defined edge for cutting accuracy and control. The AVsMini AVM6 left...

Malco’s Max2000 Aviation Snips are made in the USA and available in left, right, and combination cutting options. These snips feature Euro-styled ergonomic handles. Textured, solid-colored, molded thermoplastic grips and finger stops compliment a narrow handle opening to fit large or small hands. An ambidextrous, thumb-operated handle latch and replaceable compression spring complete this user-friendly design. All of Malco’s Max2000 Aviation Snips feature superior hardened blade edges for...

Sleek styling, easy blade replacement and larger handles make the Andy™ Snip more versatile. A sleek head design improves maneuverability. Ideal for making cuts in tight material, shapes such as J-Channel. A full 3-1/4" (82.6 mm) cutting length makes straight shearing with the Malco Andy™ Snip fast and easy. Blade replacement is easily accomplished in the field. Features: Original Andy Classic Style handle loops.Sleek Head Design Improves Maneuverability.Full 3″ (76.2 mm) Cutting Length – 12″. ...

The Stovepipe & duct cutter creates 2 finished edges with one cut while removing 3/16″ width of material from the center of the cut. Kush’n-power grips comfort users hands and reduce fatigue.Cuts through 24ga cold rolled steel1-1/4″ length of cut per strokeRemoves 3/16″ of material per cutMade in the USA

Blade length: 3" 'Duckbill' cuts straight and tight curves to the left and right Ideal for intricate scrolls, circles and tight curves Plastic coated handles and bows for comfort

The MD12 Circular Duckbill Snips maneuver and cut easily to the very tip of the blade. It cuts sheet metal, aluminum and steel siding, plastics and other thin materials without tearing or catching. Forged steel snips offer a powerful cutSnips work great for straight, curved, or notched cutsManeuverable cuts that go straight to the tip of the blade

Forged cutter head and handle: Cutter head and handle are drop-forged as a single unit. This is what makes them so robust and reliable.Induction hardened cutting edges: Extra hard cutting edges guarantee more increased durability and optimal cutting results.Bolted joint: All conventional metal snips can be disassembled for easy sharpening, thus extending their service life!Best used for sheet metal applications: cutting gutters, downspouts, general sheet metal work, HVAC, metal roofing etc....

Follow Tight Circular or Square Pattern Cuts with a Pushing or Pulling Motion The forged steel jaws of these left-cutting or right -cutting snips are set at a 90-degree angle to allow easy gripping when cutting sheet metal in tight spaces or overhead. The operator can follow tight circular or square pattern left or right cuts with either a pushing or pulling motion. A serrated edge on the upper jaw and compound head-to-handle linkage provide powerful, non-slip leverage for cutting up to...

Blade length: 1 3/4" 'Duckbill' cuts straight and tight curves to the left and right Ideal for intricate scrolls, circles and tight curves Plastic coated handles and bows for comfort

Forged cutter head and handle: Cutter head and handle are drop-forged as a single unit. This is what makes them so robust and reliable.Induction hardened cutting edges: Extra hard cutting edges guarantee more increased durability and optimal cutting results.Bolted joint: All conventional metal snips can be disassembled for easy sharpening, thus extending their service life!Best used for sheet metal applications: cutting gutters, downspouts, general sheet metal work, HVAC, metal roofing etc....

Features: Easy to hold – Smooth Cutting ActionExtremely compact cutter headThese snips enable more capacity, precision and comfort with easier

Magnesium cast handles are stronger and lighter than aluminumCuts: Sheet Metal, Roofing Materials, Carpet, Vinyl, Plastic Canvas, and other similar materials

Malco’s 12″ Gripped Andy Snip’s features the same design and cutting power of other Andy Snip models but with added handle comfort. Grips add better comfort, fit, and control over other models. All Andy Snips are ideal for cutting vinyl siding, aluminum, copper, or sheet metal. The sleek head design improves maneuverability making it easier to cut materials such as J-Channel. A full 3″ (76.2 mm) cutting length makes straight shearing with the Malco Andy™ Snip fast and easy. Pressure-fit inset...

Sleek styling, easy blade replacement and larger handles make the Andy™ Snip more versatile. A sleek head design improves maneuverability. Ideal for making cuts in tight material, shapes such as J-Channel. A full 3" (76.2 mm) cutting length makes straight shearing with the Malco Andy™ Snip fast and easy. Blade replacement is easily accomplished in the field. Features: Larger Handle LoopsSleek Head Design Improves ManeuverabilityFull 3" (76.2 mm) Cutting LengthPressure-fit Inset Blades ...

Cutting capacity is primary feature Up to 16 ga. Cold Rolled Steel, 18 ga Stainless Steel Plastic coated handles and bows for comfort Cuts straight and curves

Stainless steel.Compound leverage for stainless steel sheetsHRc 58-60,bicomponent grip

Stainless steel.Compound leverage for stainless steel sheetsHRc 58-60,bicomponent grip

Cut through heavy vinyl siding lockseams and more with ease! The MV12 Aluminum Handled Snip is part of the legendary ANDY SNIP line of "lightweight snips with the strength of steel". This unique Andy combination snip design features a knife-like cutting edge to produce a smooth slicing action for easy one-hand operation. The user simply grasps the snip with the red grip up for optimal blade alignment when making straight cuts or left or right circular cuts in a variety of non-ferrous materials...

Makes long cuts easier and straighter for vinyl, carpet, heavy gauge plastic, reinforced industrial hose, gasket/belting, metal Cuts up to 20 gauge cold roll Blade Length = 3" Overall Length = 11 1/2"

Sleek styling, easy blade replacement and larger handles make the Andy™ Snip more versatile. A sleek head design improves maneuverability. Ideal for making cuts in tight material, shapes such as J-Channel. A full 3-1/4" (82.6 mm) cutting length makes straight shearing with the Malco Andy™ Snip fast and easy. Blade replacement is easily accomplished in the field. Features: Larger Handle LoopsSleek Head Design Improves ManeuverabilityFull 3-1/4" (82.6 mm) Cutting Length ...

Blade length: 3" Regular / Straight Pattern cuts straight and wide curves Plastic Coated Handles and bows for comfort

8" Bent Snip feature Titanium Bonded blades that are 3x harder than untreated stainless steel and will stay sharper longer. Titanium Bonded blades are 3x harder than untreated stainless steel and will stay sharper longerBent

Blade length: 1 3/4" Regular / Straight Pattern cuts straight and wide curves Plastic Coated Handles and bows for comfort

Blade length: 2 1/2" 'Duckbill' cuts straight and tight curves to the left and right Ideal for intricate scrolls, circles and tight curves Plastic coated handles and bows for comfort

Replacement blade kit for MW-2210. Includes both blades and fasteners.

Replaceable Blade Option (MWT-M2210R) / Cuts Straight and Curves to the Left Cuts aluminum, roofing materials, metal flashing, linoleum, vinyl Offset blades keeps hands above material which flows away from the blades Blades are easily replaceable with a screwdriver and wrench Cut Length = 2 3/4" Nominal Length = 13" Cutting Capacity (Cold Rolled / Stainless) = 24 ga. / 28 ga.

2.375" Wuko Sheet Metal Straight Seaming Tongs - Straight Sheet Metal Tongs - Wuko's straight sheet metal / metal roofing bending pliers.

Stainless steel. Compound leverage for stainless steel sheetsHRc 58-60, bicomponent grip

Replaceable Blade Option (MWT-M2110R) / Cuts Straight and Curves to the Right Cuts aluminum, roofing materials, metal flashing, linoleum, vinyl Offset blades keeps hands above material which flows away from the blades Blades are easily replaceable with a screwdriver and wrench Cut Length = 2 3/4" Nominal Length = 13" Cutting Capacity (Cold Rolled / Stainless) = 24 ga. / 28 ga.