Miscellaneous

Rectangular Striking Face Non-marring, impact resistant polyethylene head, hickory handle. Overall length: 13-3/4" Weighs 1.21 lbs.

Freund forged welt iron seamers are traditional metal roof seam forming tools. Available in several designs including flat blade “scraper” models and an angle model for working tight corners. Anvil for use in bending standing seam profiles by handDouble sided heights – 1” x 1 3/8”5 1/2” wide

ESE Curved Hardy Tool for concave Single and Double lock standing seams FEATURES Single and Double locking seamsSimple and original methodErgonomic handle with flat surfaces fro firm grip and controlHeight of sides 1 in. x 1-3/8 in6 in. WideMade in USA

Scribe trim lines on sheet metal quickly and accurately.22 pre-set scribing depths from 1/8” to 4-3/4”Each scribing depth size features a dual edged point to create clean; readable and accurate score lines parallel to the edge of the metal sheet.Stainless steel with etched-in dimensions.This is a great time saving tool, for all sheet metal trades.Useful for making engraved marks on the material for bending or soldering purposes. The Freund Scribe is perfect for quick marking of sheet...

Freund Tools Hand Notcher 35 is perfect for cutting straight, parallel incisions in sheet metal up to 22ga thick. The notching cut length of 1-3/8″ enables long uninterrupted cuts. Easily cut through Copper, Steel, Zinc, and more! Freund Hand Notcher is a very useful tool for notching panels at the eaves end before hemmingFor straight / parallel cuts. ie. square seam folding on wall connection edgesCan be used to make continuous cutsMax depth of notch is 1-1/4″Notches 24ga steel with ease –...

ESE Curved Hardy Tool for old fashioned double lock standing seamsFEATURES Double locking seamsUsed as an Anvil for creating standing seamsForm fitted handle for comfortable transportHeight of sides 1 in. x 1-3/8 in6 in. WideMade in USA

Freund Tinman’s PVC Sheet Metal Mallets is perfect for old-world sheet metal crafting. Features:Milled PVC striking surfaces.Made in GermanyHammer offers PVC head and is fitted with a Hickory wood, ergonomic handleLightweight but strong, all purpose metal working hammerEdged end of hammerhead can be used for corner workWill not mar the metal ...

ESE 1" Fixed Cleat Bending Tool For Making 1" Fixed Cleats Maximum ThicknessSteel : 26 GAStainless : 0.015"Copper : 16 OZAluminum : 0.024"Weight : 10 lb. Makes completely formed fixed cleat in a simplet two step operation Includes two impressions for nails Pre-cut Material 1-1/2"x3" Available for ESE, Rollerformer or Knudson dimensions Made in USA ESE 1.5" Fixed Cleat Bending Tool For Making 1.5" Fixed Cleats Maximum ThicknessSteel : 26 GAStainless : 0.015"Copper : 16 OZAluminum...

Handy tool for quick and clean cutting Cuts up to 26 gauge of sheet metal The Wuko Cutter 1070 is a great tool for quick sheet metal cuts. It features an ergonomic handle. Includes an extension rod, to be easily and quickly attached / removed on demand. Ideal for the workshop as well as for the site for straight and slightly curved cutting. Great for cutting off from coil.Includes carrying caseAnother great tool from the Wuko Arsenal.This tool can be used on most sheet metals. Commonly on...

WUKO 5 1/2" Seaming Anvil / Dolly with Blade End Perfect for standing seam metal roofingForged 5 1/2 in wide blade is welded onto 1 in high x 5 1/2 in wide bar stock for seaming and bending purposesUsed for 180 degree turnback seamingOverall tool length is 11.5" in and standing height of blade is 1”

The Picard Wedged Hammer is a must have for copper work and it works great on seams.Features: Light weight but strongAll-purpose metal working hammerOne-sided wedge-Shaped Made of special plastic material High resistance to stress cracking Can be re-sharpened Head and handle with ring wedge fixtureDual curved ash handle ...

With double-curved hickory handle. Secure connection of forged hammer head and steel by wedge bolt Top Features: German Pattern Hammer head coated with black, corrosion resistant powderMade from alloyed PICARD Special-Steel, Carefully Hardened and temperedFace and Cross Peen ground, chamferd edgesSafe Connection Between the head and shaft by patented SecuTec Wedge Bolt Hardened handle protection Dual curved hickory handle DIN 1041 ...

WUKO Standing Seam Metal Roofing Double Anvil  - Double Seaming Iron - Wuko's Anvil is used to bend seams on metal roofs

Specialized for folding and fabricating metal, including metal ductwork, the N2R Hand Notcher creates a full 1-inch (25.4 mm) deep “V” shaped corner notch in 24-gauge (0.71 mm) galvanized or (0.61 mm) mild steel. It features a long-wearing, precision-ground, steel upper jaw and hardened steel stamped components with rust-resistant nickel plate and black oxide finishes. The Hand Notcher incorporates ergonomic RedLine Handle technology. The engineered handle opening complements the natural...

Freund forged welt iron seamers are traditional metal roof seam forming tools. Available in several designs including flat blade “scraper” models and an angle model for working tight corners. This flat scraper has a forged, long blade.The prism is 1 inch x 1 inch, slightly slanted, and 1/4 of an inch drilled.Made in Germany.It is 11 1/2 inches long by 5 1/2 inches wide.

Galvanized Steel:28 gaugeCompatible with all materials except copper and mill finished alluminumShipping weight: 22 lbs. per box of 1,000304 Stainless Steel28 Gauge compatible with all Roofing MaterialsShipping weight: 22 lbs per box of 1,000 For use near the peak of a roof or in areas of low expansionAvailable in Stainless Steel or Galvanized SteelMade in USA ...

304 Stainless Steel28 gaugeCompatible with all roofing materialsShipping weight: 19 lbs. per box of 1,000 Galvanized Steel28 gaugeCompatible w/ all Materials except Copper and MillShipping weight: 19 lbs per box of 1,000 For use near the peak of the roof or areas of low expansionAvailable in Stainless or GalvanizedMade in USA ...

304 Stainless Steel:- 28 gauge- compatible with all roofing materials- originally designed for use with ESE 100 system- shipping weight: 27 lbs. per box of 1,000 For use with long panels where expansion can be expected3" baseExclusive ESE butterfly topMade in USA

304 Stainless Steel:- 28 gauge- compatible with all roofing materials- originally designed for use with ESE 100 system- shipping weight: 29 lbs. per box of 1,000 For use with long panels where expansion can be expected3" baseExclusive ESE butterfly topMade in USA

304 Stainless Steel:- 28 gauge- compatible with all roofing materials- shipping weight: 21 lbs. per box of 1,000 For use near the peak of a roof or in areas of low expansionMade in USA

304 Stainless Steel:- 28 gauge- compatible with all roofing materials- shipping weight: 24 lbs. per box of 1,000 For use near the peak of a roof or in areas of low expansion1-3/4" height for use with vapor insulation on zinc roofing materialMade in USA