Ridge Poles and Rafters

The Guardian Fall Protection "Premium Cross Arm Straps" are twice as durable with dual enforced webbing and heavy duty stitching. The heavy duty wear pad protects the structural webbing against abrasion and snags. Each strap features a large D-ring and standard size D-ring for pass-thru, which increases the versatility of length adjustment. To shorten the anchorage connector, simply wrap the webbing around the anchorage and pass through the large D-ring. Features: Twice as durable with dual...

The Guardian Fall Protection Cross Arm Strap is a reusable anchorage connector that can be used in a variety of fall protection applications. To use, loop over a steel support beam or other compatible anchor, and pull the small D-ring through the pass-through loop (or second, larger D-ring). Connect to the Cross Arm Strap D-ring with a compatible lanyard or SRL, and you are ready to work.Feature: Easy to installPass-through D-ring and loop modelsLightweight and durableMultiple lengths...

The Moveable ARS Anchor follows the same design principles as our ARS Permanent Roof Anchors. This is designed for the framing tradesmen that need a quick, easy anchorage connector for their lanyards, lifelines or SRL’s. Made from 11-gauge steel that is powder coated. Comes with a 3/8” stainless steel detent pin with elastic tether. Heavy Duty 11-gauge steel construction2 models cover 2×4 trussesStainless Steel locking detent pinRated for OSHA Fall ArrestPowder Coated for Durability Please...

The Guardian Fall Protection "Premium Cross Arm Straps" are twice as durable with dual enforced webbing and heavy duty stitching. The heavy duty wear pad protects the structural webbing against abrasion and snags. Each strap features a large D-ring and standard size D-ring for pass-thru, which increases the versatility of length adjustment. To shorten the anchorage connector, simply wrap the webbing around the anchorage and pass through the large D-ring. FEATURES: Twice as durable with dual...

The Malta Dynamics A6301 - Roof Anchor 18" Standard is a fixed post roof anchor, intended for permanent applications only. The A6300 has been thoroughly tested and is compatible for installation on steel and concrete substrates (fasteners sold separately). Meets the requirements for anchors rated for window cleaning. The 12-inch anchor post functions to extend though roofing materials so that it is accessible both during and after roof construction. The A6301 roof anchor is composed of durable...

Tie-Off Straps are made from 2” wide polyester or nylon and are designed for use as temporary anchorage points to connect vertical lifelines, SRL’s, web lanyard and rope lanyards. Use on wood, steel and concrete structures. Tie-Off straps are wrapped, cinched around the structure to make for a secure anchor or can be embedded into concrete and evacuated when finished with the job. Please see the part number list below for Application, Length, Compliance and Packaging information for all our...

The Guardian Fall Protection Cross Arm Strap is a reusable anchorage connector that can be used in a variety of fall protection applications. To use, loop over a steel support beam or other compatible anchor, and pull the small D-ring through the pass-through loop (or second, larger D-ring). Connect to the Cross Arm Strap D-ring with a compatible lanyard or SRL, and you are ready to work.Feature: Easy to installPass-through D-ring and loop modelsLightweight and durableMultiple lengths...

The Malta Dynamics A6300 - Roof Anchor 12" Standard is a fixed post roof anchor, intended for permanent applications only. The A6300 has been thoroughly tested and is compatible for installation on steel and concrete substrates (fasteners sold separately). Meets the requirements for anchors rated for window cleaning. The 12-inch anchor post functions to extend though roofing materials so that it is accessible both during and after roof construction. The A6300 roof anchor is composed of durable...

The Guardian Fall Protection Cross Arm Strap is a reusable anchorage connector that can be used in a variety of fall protection applications. To use, loop over a steel support beam or other compatible anchor, and pull the small D-ring through the pass-through loop (or second, larger D-ring). Connect to the Cross Arm Strap D-ring with a compatible lanyard or SRL, and you are ready to work. Features: For use, strap loops around steel support beam or other compatible anchor and small D-ring...

The Guardian Fall Protection Cross Arm Strap is a reusable anchorage connector that can be used in a variety of fall protection applications. To use, loop over a steel support beam or other compatible anchor, and pull the small D-ring through the pass-through loop (or second, larger D-ring). Connect to the Cross Arm Strap D-ring with a compatible lanyard or SRL, and you are ready to work.Feature: Easy to installPass-through D-ring and loop modelsLightweight and durableMultiple lengths...

The Guardian Fall Protection Truss Boss Anchor Kit provides everything required for the set-up of a premium roof truss anchor. In addition to a non-corrosive Truss Boss Anchor, this kit also includes waterproof flashing for both composite and tile roofs, and also an anchor cap specially designed to protect the Truss Boss from weather, as well as to not blow off in high winds. The included Truss Boss can be installed on the truss while the truss is still on the ground for additional safety, and...

The Moveable ARS Anchor follows the same design principles as our ARS Permanent Roof Anchors. This is designed for the framing tradesmen that need a quick, easy anchorage connector for their lanyards, lifelines or SRL’s. Made from 11-gauge steel that is powder coated. Comes with a 3/8” stainless steel detent pin with elastic tether. Heavy Duty 11-gauge steel construction2 models cover 2×12 trussesStainless Steel locking detent pinRated for OSHA Fall ArrestPowder Coated for Durability Please...

The Guardian Fall Protection CB-1-B is a 6" x 6" bolt-on anchor for wood, steel, and concrete applications, and is permitted for use in combination with horizontal lifelines. This anchor is composed of steel, and is powder-coated for additional durability. It may be used in either vertical or horizontal installation applications. Fasteners not provided.Features: Easy to installCan attach to steel or concrete surfaces.Lightweight and DurableDee ring rotates 180 degrees.Permanent or temporary...

Malta Dynamics 6’ Cross Arm Strap includes a heavy-duty wear pad and reinforced stitching. This heavy-duty wear pad protects the structural webbing against abrasion. Each strap includes both a large D-ring and a standard D-ring for easy pass-thru. This beam strap is designed to be among the safest on the market. Manufacturer instructions before using this product

Malta Dynamics 4’ Cross Arm Strap includes a heavy-duty wear pad and reinforced stitching. This heavy-duty wear pad protects the structural webbing against abrasion. Each strap includes both a large D-ring and a standard D-ring for easy pass-thru. This beam strap is designed to be among the safest on the market. Please read and understand the manufacturer instructions before using this product

Permanent Truss Anchor Features 10-3/4" stainless steel post with 11/16" connecting eyeIncludes weather resistant post cap with zip-tie and 10" roof flange.4D stainless steel nails included for installation on wood roof trussesMeets OSHA 1926.502 regulationsInstalls on roof truss members 2 x 4 or largerKit includes weather flashing and capDurable Stainless steel construction for long lifeMay be installed before or after installation of roof sheathingAll fasteners included ...

The Guardian Fall Protection Concrete Swivel Anchor is specially designed to include a visual indicator that allows the user to clearly see when it is installed correctly (when proper torque is reached, the red cap will break away to display a green cap). This anchorage connector is composed of galvanized steel, making it capable of functioning in a variety of rough environments, and rotates 180° to allow for increased mobility.Features:  Easy to installVisual indicatorPivots and swivels...

Tie-Off Straps are made from 2” wide polyester or nylon and are designed for use as temporary anchorage points to connect vertical lifelines, SRL’s, web lanyard and rope lanyards. Use on wood, steel and concrete structures. Tie-Off straps are wrapped, cinched around the structure to make for a secure anchor or can be embedded into concrete and evacuated when finished with the job. Please see the part number list below for Application, Length, Compliance and Packaging information for all our...

The Guardian Fall Protection Bolt Hole Anchor is a reusable 5,000 pound certified anchorage connector that can be used in either horizontal or vertical applications. Incredibly easy to install, the Bolt Hole Anchor simply needs to be squeezed to release its locking mechanism, inserted into a compatible hole ranging from 3/4" to 1—1/4" in width, and then released to reengage the locking mechanism.Features:  Easy to installCompatible with horizontal lifelinesSqueeze to open, release to lock...

The Guardian Fall Protection CB-1-W Weld-On Anchor is 2.75" in diameter, and may be used in a variety of fall protection applications. It includes a forged steel D-ring and can withstand loads up to 5,000 pounds. This anchor is suitable for installation onto either vertical or horizontal steel structures.Features: Weld on steel applicationTemporary anchor pointPermanent application permissible if user applies appropriate finishForged steel D-ringApplicable Standards: OSHA 1910 & OSHA...

Tie-Off Straps are made from 2” wide polyester or nylon and are designed for use as temporary anchorage points to connect vertical lifelines, SRL’s, web lanyard and rope lanyards. Use on wood, steel and concrete structures. Tie-Off straps are wrapped, cinched around the structure to make for a secure anchor or can be embedded into concrete and evacuated when finished with the job. Please see the part number list below for Application, Length, Compliance and Packaging information for all our...

Tie-Off Straps are made from 2” wide polyester or nylon and are designed for use as temporary anchorage points to connect vertical lifelines, SRL’s, web lanyard and rope lanyards. Use on wood, steel and concrete structures. Tie-Off straps are wrapped, cinched around the structure to make for a secure anchor or can be embedded into concrete and evacuated when finished with the job. Please see the part number list below for Application, Length, Compliance and Packaging information for all our...

Permanent Truss Anchor Installs on roof truss members 2 x 4 or larger Available as an anchor only or as a kit including weather flashing and cap Durable Stainless steel construction for long life May be installed before or after installation of roof sheathing All fasteners included