Powered Tools

Before using prepare at least 16 inches with the ESE-001 or 8 inches with the ESE-099 Features: Grade C and D compatibleGrade E is too hard and problematicNot compatible with COR-TEN or Everlast G90Roll forms a double lock seam in one passCan be converted to single lock with optional rollsWeighs only 40 lbs.Adjustable height 1" or 1-1/2"For use with painted or unpainted materialSeams 30 ft. per minuteSpring loaded swing away handleNot compatible with Schlebach or Liberty PanelNote: prepare at...

WUKO Clipper 1020 C2A - with cordless drive, including battery charger and two batteries FEATURES Runs through sheet metal without vibrations or curlsIdeally suited for straight and curved, short and long sheet metal cuttingAlso for cutting tapered panelsTo be used in the workshop and at siteEquipped with a roller assembly to cut longer metal sheets placed on the floor in an easy and quick wayFor cutting according to marks or - equipped with an adjustable guide (accessory - see below) - for...

Universal supporter: Creates double standing seams or single standing seams and also cuts the old seam perfectly – all this with only one handy device!The new folding machine Seaming Pro offers 3 functions in only one device! It makes no difference whether you are working on the roof or on the facade; our Seaming Pro always provides the highest level of comfort and a noticeable facilitation in sheet metal processing.1 Device for 3 ApplicationsCreation of double standing seams - in just one...

WUKO SPRINTER 0410 The Wuko Sprinter 0410 is used to close the single or double lock on standing seam metal roof panels. There's no need to changing the forming rollers. With one move of a handle, switch between closing a single or double lock. Lock seamer for closing the single- or double-lock standing seam without changing forming roller. FEATURES FOR STRAIGHT PANELS Forward and backward run Variable pressure adjustment For different materials Only works for 24 gauge and lighter...

WUKO’s 1080 Trimmer is a self-propelling power tool used for removing old single or double-lock standing seams including clips. This trimmer features a forward & backward run for cutting in both directions, the cutting wheels are protected for a much safer use. Unlike other trimmers WUKO’s 1080 can be inserted to the seam from above, saving you time & increasing productivity. Self-propelling power tool for removing old standing seams Features: For cutting off single or double-lock standing...

The WUKO 1003A is used for closing a simple vertical seam with both straight and round materials (eg block curves for ventilation ducts). With a seam height of 5 to 12 mm the 1003A is lightweight, resistant, fast and easy to use. This seam closer can be used for round materials (min radius approx. 80mm) and is portable so can be used in a workshop and on site! Closing of Z-form seam, in straight & round pieces, for a seam height of 5-12 mm/0.20-0.47” Advantages: Low Weight: 3.75 Kg/8.3 lbs...

Power tool used to complete the single and or double lock standing seam. Saves incredible amounts of labor when considering hand closing lengths of seams on large roofing sites. The Perfect choice for Small and Domed roofs! FEATURES Adjustable for different seaming heights (min. height 25mm/1'') Closes straight from start of trays (Can also be used for small roof surfaces, slanting, angular, and off-set elements) Single or double lock standing seam in one work cycle For round surfaces (Domed...

Power tool used to complete the single and or double-lock standing seam on bent panels. The smallest profiling machine in the market! FEATURES Adjustable for different ending heights (min. profile height 25mm / 1'')Profiles straight from start of strips-can also be used for small roof surfaces as well as slanting, angular and off-set elements Used for separate profiling on both sides of panel Allow for profiling on narrow surfaces: Minimum distance from seam centre to seam centre (bay width)...

That stronger brother! For closing a simple vertical seam with both straight and round materials (eg block curves for ventilation ducts). Offering a seam height of 6 to 14mm, the WUKO 1003B is lightweight, resistant, fast and easy to use. This seam closer can be used for round material (min radius of approx. 150mm) and is portable so can be used within a workshop or onsite! Advantages: Low weight: 4.5 kg/10.3 lbsRobust designHandy toolHigh working speed: 4 - 6 m/13 - 19 ft/minAlso for round...

WUKO’s 1080 Trimmer is a self-propelling power tool used for removing old single or double-lock standing seams including clips. This trimmer features a forward & backward run for cutting in both directions, the cutting wheels are protected for a much safer use. Unlike other trimmers WUKO’s 1080 can be inserted to the seam from above, saving you time & increasing productivity. Self-propelling power tool for removing old standing seams Features: For cutting off single or double-lock standing...

For closing the Pittsburgh seam with both straight and curved materials. Available for different seam heights (5/16 ", 3/8" and 1/2 "), the Pittsburgh Seam Closer is lightweight, resistant, fast and easy to use. The 1004 is perfect for closing curves (min. inner radius approx. 150mm) and is portable so can be used in a workshop or on site! Features: Closing of 5/16 or 3/8 or 1/2" Pittsburgh seam Low weight : 3.85 kg/8.5 lbs Robust design Handy tool High working speed : 4-6 m/13-19...

Malco’s power assisted cutter is the fastest cutting machine in the market, making it the perfect hand-held equipment for effortless removal of 1″ or 1.5″ single and/or double mechanical lock standing-seam panels in one efficient operation. Simply attach the power assisted cutter to your cordless drill, for a max speed of 56-feet/min (17 m/min). Designed to cut below the mechanical lock and through clips. The Malco Power Assisted Cutter comes packaged in a premium IP 67 case with custom foam...

Malco’s power assisted seamer is the fastest seaming machine in the market, making it the perfect hand-held equipment for effortless seaming of 1″ or 1.5″ single and/or double mechanical lock standing-seam panels in one efficient operation, with no hand seamer required. Simply attach the power assisted seamer to your cordless drill, for a max speed of 98-feet/min (30 m/min) and 1076 sq. feet/7 min (100 m2/7 min). Designed to start the seaming process from the beginning of the metal profile...