Roof Anchor Accessories

The SSRA2 Roof Jack Adapters are part of the Standing Seam Roof Anchor system. They allow you to mount 2 in. x 10 in. walk-boards to over 500 standing seam roof panels. The SSRA2 adapter plate simply mounts on top of a Standing Seam Roof Anchor (SSRA1, available separately) that has had the D-ring removed. Constructed of solid 6061-T6 aluminum with stainless steel hardware. The adjustable height stabilizer legs provide a steady mounting bracket on hundreds of different seams. *Brackets should...

Mobile Fall Protection Systems are a great solution when there’s no place for workers to tie-off for fall protection! However, the mounting and positioning of self-retracting lifelines (SRL’s) on mobile fall protection carts is problematic. Problem #1: Currently, SRL’s are NOT being positioned according to manufacturer guidelines on mobile fall protection carts! According to DBI/Sala’s guidelines for SRL use in horizontal or near horizontal applications, “The SRL should be positioned on it’s...

OSHA regulation 1926.502(D)(20) states "The employer shall provide for 'prompt' rescue of employees in the event of a fall or shall assure that employees are able to rescue themselves. OSHA points to research that indicates suspension in a fall arrest device can result in unconsciousness followed by death in less than 30 minutes. An Air Force study shows that volunteers suspended in harnesses experienced adverse health effects in as little as 12 to 15 minutes. Some safety experts say damage...

The Guardian Fall Protection Hold Me Rope Anchor, functions to integrate an anchorage connector with a vertical lifeline system. The anchor is certified to withstand loads up to 5,000 pounds. Its made from light weight and corrosion resistant aluminum. To use, install rope through the anchor and either connect it with a compatible carabiner to a separate anchorage connector, or loop around a compatible anchor point and pull through the anchor, and create a self-contained system. Its quick and...

The Guardian CB Anchor Point Install Screws comes in a bag of 40 and are used to install CB12 and CB18 anchorage connectors. These screws come in two different options: one for wood, and one for metal. Bag of 40 screwsWood and metal deck screws available#14-10 x 2" galvanized screws for wood

Features:  For temporary use in existing openings during construction stages where doors and windows are not yet installedNo tools required with simple clamp-in non-penetrating, non-marring installation.Features telescoping adjustment for openings from 21" to 51" wideLight weight extruded aluminum construction with durable steel clamping feetMeets OSHA 1926.502 regulations ...

Self-drilling metal screws for use on the Guardian Skyhook and CB Roof Anchors. Bag of 40 screwsWood and metal deck screws available#14-14 x 2" galvanized screws for metal

SafeWaze Rivets for FrogLink Anchors 019-2005 & 019-2006  8 mm Gesipa Bulb Rivets

12 cup tipped set screws - consumable tip for permanent attachment of the SSRA to standing seam panels. Perfect for contractors that need to have extra cup tipped screws on hand in case of droppage or loss.

Self-drilling metal screws for use on the Guardian Skyhook and CB Roof Anchors.

Leading edge retractables (models with an attached shock absorber pack) are designed for use in applications to provide added protection against lifeline wear and/or cutting, when working near leading edges, where a fall may occur. This could include, but is not limited to, roofing or eaves, sheared, cold rolled, or cut steel, and edge work on concrete and various decking operations. USE CAUTION…..and provide additional protection against cutting (i.e. a heavy pad) over the exposed sharp edge....

Enhance your roofing safety with the RIDGEPRO® 8′ Extension Pole, designed to complement the RIDGEPRO® Safety Anchor System. This robust extension pole extends from 8 feet to an impressive 16 feet, allowing you to securely position the safety anchor system onto most roofs directly from your ladder. Key Features: Extended Reach: The pole extends from 8′ to 16′, providing ample length to reach most roofing scenarios.Replacement Pole: This is a replacement pole specifically for the RIDGEPRO®...

The Skyhook™ Swivel Top is great for the first-worker up system. The swivel top is easy to install as it mounts on top of the Skyhook™ anchor point via its removable and reusable bolt-on application. This product allows for a self-retracting lifeline to swivel a complete 360 degrees. This product does not include a Skyhook™ or retractable lifeline. Features: Easy installationSwivels 360 degreesRemovable and reusable bolt-on applicationCost effective accessory to the skyhookGreat for...

Full-size D-ring anchor plate for steel or concrete D-Ring 2-Hole Anchor Plates feature a stainless-steel baseplate that can be bolted or welded to steel substrates, or attached to concrete substrates with compatible fasteners. Excellent for permanent installations, or those that are exposed to the elements. Full-size D-ring is easy to manipulate with gloved hands. Bolt or Weld On Installation* This anchor bolts or welds to structure, creating an anchor point. Two Attachement Holes* The 2 Hole...

This SRL cradle installs to any Guardian Fall Protection CB post anchor. Accommodates most SRLs up to 50' in length, or up to 65' if used with additional extension attachment. Features: Mounts on top of the CB-12 or CB-18 for retractable Easy installation Swivels 360º Removable and reusable bolt application Cost effective accessory to the CB Does not include CB anchor Please read and understand the manufacturer instructions before using this product.  ...