Mobile Fall Protection

Fall Arrest rating for three workers and Fall Restraint for two. For Concrete applications, only 2 Workers for Fall Arrest and 2 for Fall Restraint. With the new job box and material rack, you will see safe and productive increases for your leading edge work. Includes Flat-Free Tires, 20 cf Job Box (w/double door opening from the center) and a Material Rack. Additional 12 cf job box and Raptor Alert available as an option. The TriRex was redesigned in 2011 from the ground up, based on customer...

Replacement shock for the AES Raptor Tri-Rex mobile fall protection cart.

Mobile Fall Protection Systems are a great solution when there’s no place for workers to tie-off for fall protection! However, the mounting and positioning of self-retracting lifelines (SRL’s) on mobile fall protection carts is problematic. Problem #1: Currently, SRL’s are NOT being positioned according to manufacturer guidelines on mobile fall protection carts! According to DBI/Sala’s guidelines for SRL use in horizontal or near horizontal applications, “The SRL should be positioned on it’s...

OSHA regulation 1926.502(D)(20) states "The employer shall provide for 'prompt' rescue of employees in the event of a fall or shall assure that employees are able to rescue themselves. OSHA points to research that indicates suspension in a fall arrest device can result in unconsciousness followed by death in less than 30 minutes. An Air Force study shows that volunteers suspended in harnesses experienced adverse health effects in as little as 12 to 15 minutes. Some safety experts say damage...

Fall Arrest rating for two workers and Fall Restraint for two. For Concrete applications, only 2 Workers for Fall Arrest and 3 for Fall Restraint. With the new job box and material rack, you will see safe and productive increases for your leading edge work. Includes Flat-Free Tires, 20 cf Job Box (w/double door opening from the center) and a Material Rack. Raptor Alert available as an option. Streamlined frame, removing any protrusions that might create tripping hazards Enlarged front...

Fall Arrest rating for three workers and Fall Restraint for two. For Concrete applications, only 3 Workers for Fall Arrest and 2 for Fall Restraint. With the new job box and material rack, you will see safe and productive increases for your leading edge work. Includes Flat-Free Tires, 20 cf. Job Box (w/double door opening from the center) and a Material Rack. Additional 10 cf. job box and Raptor Alert available as an option. The TriRex was redesigned in 2011 from the ground up, based on...

Introducing the newly redesigned PR 600 mobile anchoring system, now available at a lower price. This complete system, which includes a cart, ballast weights, and pivot plates, provides fall protection for up to three people, with two for fall arrest and one for fall restraint. The system is now lighter and easier to assemble and disassemble, making it easier to lift over ducts and piping that may lay over the roof's work surface. The component parts can even be taken up to the roof in an...

The Saber allows for 2 person fall arrest and 1 person fall restraint. The compact design allows for transport in the back of a pickup and can fit through doorways, elevators and roof hatches. The counterweights remove easily to reduce weight while moving. Incorporating the best features from the Stinger, The Saber features increased worker capacity with a reduced weight and is just as mobile as the original. Gone is the original dolly moving system-the Saber has an integrated axle for...

Meet the Safety Bull - Smaller than the original TriRex and lighter than the Stinger the Safety Bull is Leading Edge Safety's most versatile mobile fall protection unit. Having an anchorage point on wheels has been a revolution in fall protection. We know that the industry has long sought a more compact fall protection solution, and thus Leading Edge is extremely proud to introduce the Safety Bull. Smaller than the original TriRex and lighter than the Stinger the...

The newest addition to Tie Down's mobile fall protection line, Big Foot offers even easier portability while allowing work on concrete, TPO, and EPDM. This lightweight series provides fall arrest for one person and an additional two in restraint. With a gross weight of 750 lbs., nearly half the weight of the Squatch, Bigfoot includes a jacking feature for easy mobility and handling, printed instructions, and hoist rings for lifting. Available in both a USA model and a Canadian model, this...

Squatch, short for Sasquatch, is the bigger, stronger cousin to Tie Down's Big Foot. Its improved, innovative, and patented design brings to life the option roofers have been demanding for over two decades. Not only a "best-in-class" mobile fall protection system, the enhanced design allows for a 100 ft. Horizontal Lifeline application. Through the use of this pre-engineered HLL, the Squatch protects up to seven workers at a time, three in fall arrest and four in restraint. Designed for use...

Job Box can be used to store the tools you need while performing your work. It makes it easy to safely carry your tools around on the roof.FEATURES 4.5 ft3 Face Opening Job BoxFits all Safety Bull modelsLocking T-Handle Latch

The SafetyGator™ offers you protection from the number one cause of death and serious injury at residential sites- heights from six feet or more. The SafetyGator™ is the simplest solution for compliance and maximum safety. The SafetyGator™ from Leading Edge Safety is a mobile fall protection cart designed for use with steep-slope roofing projects. No assembly is required. Position the SafetyGator next to your steep-slope or residential job site, fill with water, hook safety lines to the...

When using Safety Bull on concrete or asphalt by one person, an extra counterweight must be added to the undercarriage to ensure optimum resistance. The counterweight add-on increases the weight of the cart by 145 kg to a total of 419 kgFEATURESFits all Safety Bull models(11) Counterweights per Safety Bull are required

If you use many long materials or materials of varying lengths, our Material Rack offers great advantages.Combined with Sidebars, Material Rack gives you the optimum solution for transport/storage of materials, making your work easier. - Fits all Safety Bull Models*Material Rack can be used with all add-on products. If used together with Job Box, only one Material Rack must be used.*

Side Rails hold your materials in place, making it easy for you to move around.Combined with Material Rack, Sidebars provide the optimum solution for transport and storage of materials, making your work easier.Fits all Safety Bull models

The X-Calibur allows for 1 person on fall arrest. The compact design allows for transport in the back of a pickup and can fit through doorways, elevators and roof hatches. The counterweights remove easily to reduce weight while moving.  When you need versatile mobile fall protection, the X-Calibur will meet your needs.  The X-Calibur meets and exceeds 1926.502 (D) & ANSI/ASSE Z359.6-2009

The X1000 is a road-towable Mobile Fall Arrest system that weighs in at 2,200 lbs. It can be towed by nearly any vehicle on the market. Do you work in an indoor facility? That is no problem because the design has built-in fork pockets for easy mobility! The X1000 XSERIES Mobile Grabber provides two overhead anchor points up to 22 feet in the air and has been tested to meet OSHA fall protection codes. This model is completely manual, operated by a hand-pumped hydraulic system, providing the...

Features: PortableHighway TowableFast, Easy SetupOverhead Anchorage. Anytime. AnywhereOSHA, ANSI, CDS, EN-795 CompliantIndependent 3rd Party TestedAward-Winning Fall Protection Compliance M1000: The Malta Dynamics Mobile Grabber GO! Friction Drive Mobility Package adds wireless, independent mobility to the unit. Our system attaches two independent electric motors to the Malta Dynamics Mobile Grabber that drives its wheels, allowing you to position the Grabber without a vehicle attached. Note:...

Features: PortableHighway TowableFast, Easy SetupOverhead Anchorage. Anytime. AnywhereOSHA, ANSI, CDS, EN-795 CompliantIndependent 3rd Party TestedAward-Winning Fall Protection Compliance M1000: The Malta Dynamics Mobile Grabber GO! Friction Drive Mobility Package adds wireless, independent mobility to the unit. Our system attaches two independent electric motors to the Malta Dynamics Mobile Grabber that drives its wheels, allowing you to position the Grabber without a vehicle attached. Note:...

X1240 The Grabber® Mobile Fall Protection System provides two overhead anchor points – anytime, anywhere. The Grabber® meets OSHA fall protection codes and ANSI Z359.6 design requirements for fall arrest systems, and has been validated by an independent 3rd party ISO 17025 testing laboratory. The versatile Grabber® is designed to be used in either fall arrest or fall restraint and features a one-of-a kind adjustable mast that can be positioned anywhere between 2’ and the unprecedented maximum...