Guardian Fall Protection Anchors

For use on roofs from flat to 12/12 pitch, wood or metal. 5000 lb. anchor point. Fasteners included. Tested and approved for metal roofing applications, minimum 20 gauge metal or thicker, attached directly onto the surface. For metal installation: use (16) screws (8 per side), 6 in center column of fastener installation holes, in 1 hole left of center and 1 hole right of center. Guardian recommends HILTI Kwik-Pro self-drilling screws. Features: Designed for temporary use on wood rooftopsFits...

The Guardian Fall Protection Two-Way Universal Standing Seam Clamp is lightweight, reusable, and easy-to-use. This product possesses an all steel construction with zinc electroplate finish making it very durable. The clamp also features a unique, reversible design that allows for seams up to 1-inch wide. The MR-24, VSR or similar profiles can be covered with one clamp. Features: Fits most brands and styles of standing seam roofs and is completely reusableUnique reversible design allows for...

The Guardian Fall Protection Bull Ring Anchors are suitable for personal fall arrest, restraint, or work positioning applications. For all applications, the worker weight capacity range (including all clothing, tools, and equipment) is 130 to 310 pounds. The anchor itself is constructed of 100% zinc-plated steel. Substrate must be roof truss or support beam that is minimum of 3" thick CDX or better. All fasteners (use either six 16d, 3" long 8 gauge nails or three 1/4" x 3" zinc-plated steel...

The Guardian Fall Protection CB Anchor Series are perhaps the most proven fall protection anchors on the market. CB Anchors are compatible for installation onto wood, steel, and concrete substrates (fasteners are included for wood and steel applications). The anchor post functions to extend though roofing so that it is accessible both during and after roof construction, and is compatible for use with SRLs, vertical lifelines, horizontal lifelines, and shock absorbing lanyards. CB Anchors are...

The Guardian Fall Protection 00250 Standing Seam Roof Clamp is designed to be used with SRL's up to 50 ft. in length. It functions to attach to metal roof seams spaced from 24 to 36 in. apart, while allowing the attached SRL to rotate a full 360 degrees  * Can be used up to 65 ft. in length if used in combination with the retractable swivel adapter * Features: Reusable AnchorEasy to install360 degree rotationCompatible with Guardian SRL's up to 50 ft. Tech Data: Worker Capacity Range: 130...

The Guardian Fall Protection "Premium Cross Arm Straps" are twice as durable with dual enforced webbing and heavy duty stitching. The heavy duty wear pad protects the structural webbing against abrasion and snags. Each strap features a large D-ring and standard size D-ring for pass-thru, which increases the versatility of length adjustment. To shorten the anchorage connector, simply wrap the webbing around the anchorage and pass through the large D-ring. Features: Twice as durable with dual...

The Guardian Fall Protection Cross Arm Strap is a reusable anchorage connector that can be used in a variety of fall protection applications. To use, loop over a steel support beam or other compatible anchor, and pull the small D-ring through the pass-through loop (or second, larger D-ring). Connect to the Cross Arm Strap D-ring with a compatible lanyard or SRL, and you are ready to work.Feature: Easy to installPass-through D-ring and loop modelsLightweight and durableMultiple lengths...

The Guardian Fall Protection Snappy Anchor is a disposable anchorage connector designed to fit a wide variety of wood roof pitches. The Snappy is convenient, easy to install and remove, and meets all applicable OSHA regulations. To use, simply adjust the Snappy to fit over selected roof ridge, then nail into roof truss using all fastener installation holes. Supplied with all necessary fasteners. Features:  Single UseCan be bent to fit any roof pitch Convenient and disposable Easy to...

The Guardian Fall Protection CB Anchor Series are perhaps the most proven fall protection anchors on the market. CB Anchors are compatible for installation onto wood, steel, and concrete substrates (fasteners are included for wood and steel applications). The anchor post functions to extend though roofing so that it is accessible both during and after roof construction, and is compatible for use with SRLs, vertical lifelines, horizontal lifelines, and shock absorbing lanyards. CB Anchors are...

The Guardian Fall Protection Halo Anchor is a temporary and reusable roof anchorage connector. It is composed of 1/4 inch thick steel, a zinc-plated forged alloy steel O-ring, and can support loads up to 5,000 pounds. It may be used in both Fall Arrest and Restraint applications, and is supplied with all necessary fasteners. FEATURES: Removable/Reusable 1/4" thick steel roof anchorComplete with zinc plated forged alloy steel O-ringNail or bolt into the roof member)Designed to be removable, it...

The Parapet Anchor System can be used for the placement of guardrail uprights, single point tie-off, or in conjunction with a horizontal rope lifeline. This product meets OSHA standards for guardrail and anchor point purposes. This anchor system acts as a single point tie-off and also integrates a safety pin for secure set up and adjustment so that the parapet anchor can fit a wall from four inches (4") to twenty inches (20") in width. The product is reinforced for long life, rated for 5,000...

The Guardian Fall Protection Ridge-It Anchor line is designed for permanent use on wood rooftops. This Ridge-It model RIDG-1 is manufactured with a D-ring on one end and is 9—3/4" long, while the RIDG-2 is manufactured with 2 D-ring ends, and is 18" long. Ridge-It Anchors are composed highly durable stainless steel and zinc-plated steel, and are compliant with all applicable OSHA regulations. Ridge-It Anchors are easy to install, and are ideal for both residential construction and maintenance...

The Guardian Fall Protection CB Anchor Series are perhaps the most proven fall protection anchors on the market. CB Anchors are compatible for installation onto concrete substrates. The anchor post functions to extend though roofing so that it is accessible both during and after roof construction, and is compatible for use with SRLs, vertical lifelines, horizontal lifelines, and shock absorbing lanyards. CB Anchors are composed of durable, galvanized steel, and are an excellent choice for...

The Guardian Fall Protection Hold Me Rope Anchor, functions to integrate an anchorage connector with a vertical lifeline system. The anchor is certified to withstand loads up to 5,000 pounds. Its made from light weight and corrosion resistant aluminum. To use, install rope through the anchor and either connect it with a compatible carabiner to a separate anchorage connector, or loop around a compatible anchor point and pull through the anchor, and create a self-contained system. Its quick and...

The Guardian Fall Protection Cross Arm Strap is a reusable anchorage connector that can be used in a variety of fall protection applications. To use, loop over a steel support beam or other compatible anchor, and pull the small D-ring through the pass-through loop (or second, larger D-ring). Connect to the Cross Arm Strap D-ring with a compatible lanyard or SRL, and you are ready to work.Feature: Easy to installPass-through D-ring and loop modelsLightweight and durableMultiple lengths...

The Guardian Fall Protection 4-Way Plate Anchor supports one worker in fall arrest or two workers in fall restraint, and is suitable for installation onto wood, metal, or concrete. Its 4 connection points greatly increase the potential working range, as a worker can detach from a connection point, reattach to the opposite connection point, and be able to work in fall arrest or restraint on the other side of a building, all from the same anchor. Its 90-degree angles between its connection...

The Guardian Fall Protection CB Anchor Series are perhaps the most proven fall protection anchors on the market. CB Anchors are compatible for installation onto wood, steel, and concrete substrates (fasteners are included for wood and steel applications). The anchor post functions to extend though roofing so that it is accessible both during and after roof construction, and is compatible for use with SRLs, vertical lifelines, horizontal lifelines, and shock absorbing lanyards. CB Anchors are...

The EcoAnchor was developed in direct partnership with CHECKMATE, an industry leading fall protection manufacturer in the UK, now part of the Pure Safety Group family of companies effective June 2018. Guardian is excited to offer the innovative EcoAnchor, a water filled neoprene counterweight fall arrest anchor system. This anchor has been tested and approved on a wide variety of low slope roofs, weighs less than 17 pounds when empty, and comes with a specialized carrying case for stowing. It...

The Guardian Fall Protection Ridge-It Anchor line is designed for use on wood rooftops. This Ridge-It model RIDG-1 is manufactured with a D-ring on one end and is 9—3/4" long, while the RIDG-2 is manufactured with 2 D-ring ends, and is 18" long. Ridge-It Anchors are composed highly durable stainless steel and zinc-plated steel, and are compliant with all applicable OSHA regulations. Ridge-It Anchors are easy to install, and are ideal for both residential construction and maintenance...

The Guardian Fall Protection Cross Arm Strap is a reusable anchorage connector that can be used in a variety of fall protection applications. To use, loop over a steel support beam or other compatible anchor, and pull the small D-ring through the pass-through loop (or second, larger D-ring). Connect to the Cross Arm Strap D-ring with a compatible lanyard or SRL, and you are ready to work.Feature: Easy to installPass-through D-ring and loop modelsLightweight and durableMultiple lengths...

The Guardian CB Anchor Point Install Screws comes in a bag of 40 and are used to install CB12 and CB18 anchorage connectors. These screws come in two different options: one for wood, and one for metal. Bag of 40 screwsWood and metal deck screws available#14-10 x 2" galvanized screws for wood

Self-drilling metal screws for use on the Guardian Skyhook and CB Roof Anchors. Bag of 40 screwsWood and metal deck screws available#14-14 x 2" galvanized screws for metal

Self-drilling metal screws for use on the Guardian Skyhook and CB Roof Anchors.

The Guardian Fall Protection CB-1-B is a 6" x 6" bolt-on anchor for wood, steel, and concrete applications, and is permitted for use in combination with horizontal lifelines. This anchor is composed of steel, and is powder-coated for additional durability. It may be used in either vertical or horizontal installation applications. Fasteners not provided.Features: Easy to installCan attach to steel or concrete surfaces.Lightweight and DurableDee ring rotates 180 degrees.Permanent or temporary...

The Guardian Fall Protection Beamer 2000 is a versatile Fall Arrest anchor designed for use both overhead and at foot level. Attachable to both steel I and H beams, the Beamer 2000 offers Nylon bushings to provide smooth movement along the beam, that also function as impact indicators in the event of a fall. This extremely durable anchor also includes a precision machined aluminum bar and ratcheting end pieces, which allow for quick and easy adjustment with just one hand. When used at foot...

Leading edge retractables (models with an attached shock absorber pack) are designed for use in applications to provide added protection against lifeline wear and/or cutting, when working near leading edges, where a fall may occur. This could include, but is not limited to, roofing or eaves, sheared, cold rolled, or cut steel, and edge work on concrete and various decking operations. USE CAUTION…..and provide additional protection against cutting (i.e. a heavy pad) over the exposed sharp edge....

The Guardian Fall Protection Bolt Hole Anchor is a reusable 5,000 pound certified anchorage connector that can be used in either horizontal or vertical applications. Incredibly easy to install, the Bolt Hole Anchor simply needs to be squeezed to release its locking mechanism, inserted into a compatible hole ranging from 3/4" to 1—1/4" in width, and then released to reengage the locking mechanism.Features:  Easy to installCompatible with horizontal lifelinesSqueeze to open, release to lock...

The Guardian Fall Protection BMR Anchor is a Fall Arrest anchor designed to be used in combination with either a shock absorbing lanyard or SRL. It may also be used for Restraint and Work Positioning applications. Its free moving rollers allow for smooth travel around the work area while always remaining tied off, and its safety locking toggles allow for both easy adjustment and eliminate the risk of accidental clamp slippage.Easy to installFree moving rollersLightweight and durableClick here...

The Skyhook™ Swivel Top is great for the first-worker up system. The swivel top is easy to install as it mounts on top of the Skyhook™ anchor point via its removable and reusable bolt-on application. This product allows for a self-retracting lifeline to swivel a complete 360 degrees. This product does not include a Skyhook™ or retractable lifeline. Features: Easy installationSwivels 360 degreesRemovable and reusable bolt-on applicationCost effective accessory to the skyhookGreat for...

These anchors are sheathed in heavy duty nylon webbing to protect their inner core from any abrasion and wear, and are some of the most cost effective anchors around. They can be installed as permanent anchors during building construction to protrude through poured concrete, as well as in temporary applications such as wood framing, rebar work, and pipe racking—though always ensure that the selected attachment point can withstand loads of up to 5,000 pounds. Concrete Anchor Straps are intended...

The Guardian Fall Protection Cable Choker Anchor is an ideal lightweight and portable anchorage connector. To use, cinch around a compatible beam or other structural anchor, attach with a compatible lanyard or SRL, and you are ready to work. Available with a variety of connector and pass-through options. Features:  Easy to installSuperior durabilityResistant to wear and abrasionO-Ring Ends 2 ½” & 3”Length: 6 ft.  Technical Data:  Applicable Standards: ANSI Z359.18-17, ANSI...

These anchors are sheathed in heavy duty nylon webbing to protect their inner core from any abrasion and wear, and are some of the most cost effective anchors around. They can be installed as permanent anchors during building construction to protrude through poured concrete, as well as in temporary applications such as wood framing, rebar work, and pipe racking—though always ensure that the selected attachment point can withstand loads of up to 5,000 pounds. Concrete Anchor Straps are intended...

Non-penetrating, adjustable anchor for standing seam roofs The Adjustable Standing Seam Roof Anchor is designed for fall protection systems on new or existing standing seam roofs. It features twin mounting bars using a total of eight (8) industry-standard S-5 clamps for incredibly secure attachment to standing seams (see instructions for complete list). The clamps will not penetrate the panels or seams, ensuring the roof integrity is not compromised. SKU: 53221 Features Adjustable from 12” to...

The Guardian Fall Protection Beamer 3000, the newest in our line of beam anchors, combines the many versatile features of the Beamer 2000 with some new innovations. The Beamer 3000 weighs 25% less than its predecessor, making it one of the lightest beam anchors available on the market. It also includes a dual adjustment feature that makes it even easier to adjust to its ideal position. No more unsnagging a connector or a lifeline when working at heights, the new and improved Beamer 3000...

These anchors are sheathed in heavy duty nylon webbing to protect their inner core from any abrasion and wear, and are some of the most cost effective anchors around. They can be installed as permanent anchors during building construction to protrude through poured concrete, as well as in temporary applications such as wood framing, rebar work, and pipe racking—though always ensure that the selected attachment point can withstand loads of up to 5,000 pounds. Concrete Anchor Straps are intended...

This SRL cradle installs to any Guardian Fall Protection CB post anchor. Accommodates most SRLs up to 50' in length, or up to 65' if used with additional extension attachment. Features: Mounts on top of the CB-12 or CB-18 for retractable Easy installation Swivels 360º Removable and reusable bolt application Cost effective accessory to the CB Does not include CB anchor Please read and understand the manufacturer instructions before using this product.  ...

Compact, robust anchor for wood, metal, or concrete D-Bolts anchors are versatile, small-footprint anchors suitable for wood, steel, or concrete substrates, and excel in applications that require multiple anchors in distributed locations. They are easily installed with hand tools, and their light weight allows the worker to carry several with them for installation as work progresses. Can be used for single-point tie-offs or with horizontal lifelines systems. D-Bolt Anchors are designed as the...

New for 2023: The A5 Concrete Expansion Anchor is a popular 5,000 lb anchorage connector for concrete substrates. Its ergonomic thumb rest makes installation fast, easy, and comfortable to use. The expanded connection loop eases anchor connectivity and includes a clear view cable protection to aid during inspection.

Swiveling anchor for concrete and metal substrates The Swivel Anchor is a popular anchorage connector for both concrete and metal substrates. Its design includes a full-size D-ring for easy connections and a dual swivel for 360-degree mobility. Available with a concrete expansion anchor, adjustable bolt assembly, or weld-on puck to provide a 10K anchor point in a variety of applications. FEATURES For temporary and permanent applicationsSingle anchor for installations 10k and below360 degrees...

Swiveling anchor for concrete and metal substrates The Swivel Anchor is a popular anchorage connector for both concrete and metal substrates. Its design includes a full-size D-ring for easy connections and a dual swivel for 360-degree mobility. Available with a concrete expansion anchor, adjustable bolt assembly, or weld-on puck to provide a 10K anchor point in a variety of applications. FEATURES For temporary and permanent applicationsSingle anchor for installations 10k and below360 degrees...

Swiveling anchor for concrete and metal substrates The Swivel Anchor is a popular anchorage connector for both concrete and metal substrates. Its design includes a full-size D-ring for easy connections and a dual swivel for 360-degree mobility. Available with a concrete expansion anchor, adjustable bolt assembly, or weld-on puck to provide a 10K anchor point in a variety of applications. FEATURES For temporary and permanent applicationsSingle Anchor for installations for 10k and below360...

Guardian Fall Protection 10000 Lbs Steel Swivel Anchor with Weld-On Pluck Assembly The Swivel Anchor is a popular anchorage connector for both concrete and metal substrates. Its design includes a full size D-ring for easy connections and a dual swivel for 360-degree mobility. Available with a concrete expansion anchor, adjustable bolt assembly, or weld-on puck to provide a 10K anchor point in a variety of applications. FEATURES For temporary and permanent applications  Single Anchor for...

Post-style anchor designed for tie-back or suspension applications S-Anchors are specially designed for window washing, façade maintenance operations, or other applications where workers are required to be in full suspension. The oversized, extra-long post gives extra flexibility when installing through finished roofs to accommodate a variety of finish materials. When not used in tie-back applications, the S-Anchor can be used as a standard fall protection anchor. FEATURES For concrete and...

The Guardian Fall Protection Beamer 2000 is a versatile Fall Arrest anchor designed for use both overhead and at foot level. Attachable to both steel I and H beams, the Beamer 2000 offers Nylon bushings to provide smooth movement along the beam, that also function as impact indicators in the event of a fall. This extremely durable anchor also includes a precision machined aluminum bar and ratcheting end pieces, which allow for quick and easy adjustment with just one hand. When used at foot...

The Guardian Fall Protection “Angel Anchor System” will provide an ideal solution when you need a versatile and single tie-off point on a roof top where penetrating the roof is not an option. This product is easy to assemble and each weight has an attached handle for ease of movement and installation. This particular anchor system is suitable for use on multiple roof surfaces (up to a 5 degree slope) and is corrosion resistant for a long life. The Angel Anchor System is designed for use by...