Guardian Fall Protection

The Guardian Fall Protection Bucket of Safe-Tie is a roofing kit built for the roofer, by the roofer. It is one of the few kits available on the market that includes a lifeline with an integrated shock absorber, which allows the worker to never have to worry about incorporating an additional shock absorbing lanyard into their fall protection system. Removing the shock absorbing component from the worker’s back also results in less weight placed on the dorsal D-ring, resulting in an increase in...

The Guardian Fall Protection Safe-T Ladder Extension System is designed to attach to the top of a ladder to provide a safe and easy transition from the ladder to a raised surface. It requires no tools, drilling, or bolting to install, and is one of the most effective means of improving the safety of nearly any ladder. Once installed, it provides 2 offsetting handrails that offer a point of walkthrough to step on or off the ladder. This patented piece of equipment assists workers in complying...

For use on roofs from flat to 12/12 pitch, wood or metal. 5000 lb. anchor point. Fasteners included. Tested and approved for metal roofing applications, minimum 20 gauge metal or thicker, attached directly onto the surface. For metal installation: use (16) screws (8 per side), 6 in center column of fastener installation holes, in 1 hole left of center and 1 hole right of center. Guardian recommends HILTI Kwik-Pro self-drilling screws. Features: Designed for temporary use on wood rooftopsFits...

The Guardian Fall Protection Poly Steel Rope is ideal for high-moisture environments. Nylon rope, when wet, will typically reduce in strength by between 10% to 15%, but unlike Nylon, Poly Steel Rope does not absorb water, so will not diminish in strength in wet conditions. This rope is also particularly strong when it comes to resisting damage from ultraviolet light, and its synthetic composition makes it especially resistant to cuts and abrasion, thereby increasing equipment lifetime. Poly...

The Guardian Fall Protection Rope Positioning Device Assembly is easy to install and is designed to lock automatically in the event of a fall. Rope Positioning Devices can be easily moved along the rope by squeezing the positioning device, are compatible with ropes from 5/8 thick, and are supremely durable.Fits 5/8” safety ropeSqueeze to moveLocks automaticallyApplicable Standards: ANSI Z359.1-07, ANSI A10.32-12, OSHA 1926 Subpart M, OSHA 1910Worker Capacity Range: 130-310...

The Guardian Fall Protection Poly Steel Rope is ideal for high-moisture environments. Nylon rope, when wet, will typically reduce in strength by between 10% to 15%, but unlike Nylon, Poly Steel Rope does not absorb water, so will not diminish in strength in wet conditions. This rope is also particularly strong when it comes to resisting damage from ultraviolet light, and its synthetic composition makes it especially resistant to cuts and abrasion, thereby increasing equipment lifetime. Poly...

The Guardian Fall Protection Two-Way Universal Standing Seam Clamp is lightweight, reusable, and easy-to-use. This product possesses an all steel construction with zinc electroplate finish making it very durable. The clamp also features a unique, reversible design that allows for seams up to 1-inch wide. The MR-24, VSR or similar profiles can be covered with one clamp. Features: Fits most brands and styles of standing seam roofs and is completely reusableUnique reversible design allows for...

The Guardian Fall Protection Bull Ring Anchors are suitable for personal fall arrest, restraint, or work positioning applications. For all applications, the worker weight capacity range (including all clothing, tools, and equipment) is 130 to 310 pounds. The anchor itself is constructed of 100% zinc-plated steel. Substrate must be roof truss or support beam that is minimum of 3" thick CDX or better. All fasteners (use either six 16d, 3" long 8 gauge nails or three 1/4" x 3" zinc-plated steel...

The Shock Absorbing Lanyard is the premiere free fall lanyard offered by Guardian Fall Protection. It meets all the stringent ANSI Z359.13-2013 regulations, and the integrated shock absorbing component limits average arresting forces to 900 pounds or less. It is comprised of 1 inch nylon webbing, and is available in a variety of lengths and connector options, including steel and aluminum snap hooks and rebar hooks, all of which make it one of the most functional and durable lanyards on the...

Each Kit Contains: Lightweight, Universal Fit Full Body Harness M-L (Guardian #37015): Features our Impact Indicator tag that deploys if the harness has been involved in a fall 5 Points of adjustment for added comfortTongue Buckle leg straps Padded shoulders increase comfort and reduce the fatigue caused by the weight of tools Reusable Roof Anchor with Attachment D-Ring (Guardian #00455): Easily installs on any pitched or flat surface roofs with screws included Once job is complete, remove the...

The Guardian Fall Protection Internal Shock Lanyard is comprised of heavy duty outer polyester webbing, with a polyester core specifically designed to reduce the impact forces resulting from a fall. Because the shock absorption is built directly into the lanyard there is no need for an external shock absorber, making the Internal Shock Lanyard a particularly lightweight option. This lanyard does not stretch, except if exposed to high levels of force, and is available in single and double leg...

The Guardian Fall Protection Rope Grab is easy to install and is designed to lock automatically in the event of a fall. Rope Grabs are available in a variety of configurations, are compatible with 5/8" safety ropes, and are supremely durable.Features: Removable rope grabs are easy to installFits 5/8" safety ropesLock automatically when a fall occursApplicable Standards: OSHA 1926 Subpart M and OSHA 1910Worker Capacity Range: 130-310 lbs.Material: Galvanized steelMin....

The Guardian Fall Protection CB Anchor Series are perhaps the most proven fall protection anchors on the market. CB Anchors are compatible for installation onto wood, steel, and concrete substrates (fasteners are included for wood and steel applications). The anchor post functions to extend though roofing so that it is accessible both during and after roof construction, and is compatible for use with SRLs, vertical lifelines, horizontal lifelines, and shock absorbing lanyards. CB Anchors are...

The Shock Absorbing Lanyard is the premiere free fall lanyard offered by Guardian Fall Protection. It meets all the stringent ANSI Z359.13-2013 regulations, and the integrated shock absorbing component limits average arresting forces to 900 pounds or less. It is comprised of 1 inch nylon webbing, and is available in a variety of lengths and connector options, including steel and aluminum snap hooks and rebar hooks, all of which make it one of the most functional and durable lanyards on the...

The Guardian Fall Protection "Cyclone HUV Harness" is an ideal combination for fall arrest, work positioning, rescue and rope access applications. This harness was designed with a unique X-back which leaves the harness straps tangle free as well as a specially cushioned mesh net for better shock absorption. Combination buckles on the shoulder and leg straps make this harness very adjustable. It also features web keepers on the shoulder straps for easy placement of lanyards. The harness also...

The Guardian Fall Protection 00250 Standing Seam Roof Clamp is designed to be used with SRL's up to 50 ft. in length. It functions to attach to metal roof seams spaced from 24 to 36 in. apart, while allowing the attached SRL to rotate a full 360 degrees  * Can be used up to 65 ft. in length if used in combination with the retractable swivel adapter * Features: Reusable AnchorEasy to install360 degree rotationCompatible with Guardian SRL's up to 50 ft. Tech Data: Worker Capacity Range: 130...

The Guardian Fall Protection Parapet Clamp Guardrail is an economical and easy to use system. An often overlooked option in the world of fall protection, guardrails and warning lines function to block workers from exposure to fall hazards, often entirely eliminating the need for other types of fall protection equipment. Each clamp is provided with a corresponding guardrail post, which is compatible with 2x4” boards. This system can fit any parapet from 4 to 24 inches in width, and an entire...

The Trauma Strap is an indispensable item for anyone working at height, and helps to mitigate the effects of suspension trauma (which can occur in as little as 15 minutes) in the event of a fall. By allowing the fallen worker to assume a standing position and relieve pressure on the lower extremities, the Trauma Strap allows better blood flow and reduces fatigue. Compatible with all Guardian full-body harnesses, the Trauma Strap is easy to adjust, and its low profile keeps it out of the way...

The Guardian Fall Protection Polydac Rope Vertical Lifeline Assembly is one of the strongest conventional rope assemblies available today. It is 100% resistant to rot and mildew, even if stored when wet, and has excellent resistance to alkalis and most solvents. It also provides good protection against abrasion, and has a melting point of over 300 degrees. Polydac Rope has a working load elongation of 8%, and absorbs more energy than any other type of rope available on the market—12 times as...

The Guardian Fall Protection Poly Steel Rope is ideal for high-moisture environments. Nylon rope, when wet, will typically reduce in strength by between 10% to 15%, but unlike Nylon, Poly Steel Rope does not absorb water, so will not diminish in strength in wet conditions. This rope is also particularly strong when it comes to resisting damage from ultraviolet light, and its synthetic composition makes it especially resistant to cuts and abrasion, thereby increasing equipment lifetime. Poly...

The Guardian Fall Protection "Premium Cross Arm Straps" are twice as durable with dual enforced webbing and heavy duty stitching. The heavy duty wear pad protects the structural webbing against abrasion and snags. Each strap features a large D-ring and standard size D-ring for pass-thru, which increases the versatility of length adjustment. To shorten the anchorage connector, simply wrap the webbing around the anchorage and pass through the large D-ring. Features: Twice as durable with dual...

The Guardian Fall Protection Poly Steel Rope is ideal for high-moisture environments. Nylon rope, when wet, will typically reduce in strength by between 10% to 15%, but unlike Nylon, Poly Steel Rope does not absorb water, so will not diminish in strength in wet conditions. This rope is also particularly strong when it comes to resisting damage from ultraviolet light, and its synthetic composition makes it especially resistant to cuts and abrasion, thereby increasing equipment lifetime. Poly...

The new Velocity Harness by Guardian Fall Protection brings the best economy harness to the market. Our engineers revamped the tired old basic harness into a higher quality product that your employees and customers will enjoy. Features : Back D-Ring Dual Lanyard Keepers: Other manufacturers provide only one or none on their economy harness. (Picture #3) Identification: Now your employees can personalize their harnesses without jeopardizing the integrity of the webbing. (Picture #4) Finished...

The Guardian Fall Protection Double-Locking Carabiner with 3/4" gate (made from either steel or aluminum) is specially designed to be both supremely durable and easy to use. The gate is certified to withstand loads up to 3,600 pounds, is self-closing and self-locking, and can be opened with just one hand. All Double-Locking Carabineers are compliant with the most current ANSI and OSHA regulations.Features:  Easy to use, one hand operationRated to 5,000 lbs. along major axis, and 3,600...

The Guardian Fall Protection Cross Arm Strap is a reusable anchorage connector that can be used in a variety of fall protection applications. To use, loop over a steel support beam or other compatible anchor, and pull the small D-ring through the pass-through loop (or second, larger D-ring). Connect to the Cross Arm Strap D-ring with a compatible lanyard or SRL, and you are ready to work.Feature: Easy to installPass-through D-ring and loop modelsLightweight and durableMultiple lengths...

The Guardian Fall Protection Stretch Lanyard is ideal for work in tight spaces or around machinery, since its stretching capability helps reduce hazards of tripping or catching on moving parts. This lanyard stretches from between 4-1/2 to 6 feet. It is supremely lightweight, and its unique design eliminates the need for an external shock absorber. Features: 1" Nylon WebbingClear shock absorbing pack for easy inspectionAlways ANSI compliant 3,600 lb. / Double Lock Steel Rebar Snap hooks,...

The Guardian Fall Protection Ladder Stability Anchor is specially designed to promote compliance with OSHA regulation 1926.1053(b)(1), which states, “…the ladder shall be secured at its top to a rigid support that will not deflect.” The Ladder Stability Anchor functions to clamp to a roof (without any penetration of the substrate) and then secure to the top rung of a ladder with two 48" Velcro straps, ensuring that the ladder will not fall or move. It is composed of lightweight aluminum for...

The Guardian Fall Protection Snappy Anchor is a disposable anchorage connector designed to fit a wide variety of wood roof pitches. The Snappy is convenient, easy to install and remove, and meets all applicable OSHA regulations. To use, simply adjust the Snappy to fit over selected roof ridge, then nail into roof truss using all fastener installation holes. Supplied with all necessary fasteners. Features:  Single UseCan be bent to fit any roof pitch Convenient and disposable Easy to...

The newly designed Safe-T Ladder Gate, with improved labeling placement and increased spring strength easily swings open to allow a worker to pass from a ladder to the rooftop. It includes a self closing mechanism to prevent falls through the ladder rail opening. Its both lightweight and durable, and is compliant with all applicable OSHA regulations. Features: LightweightDurableCompliant with all applicable OSHA regulationsMaterial: Powder-coated Steel **Guardian Safe-T Ladder Extensions Sold...

The Guardian Fall Protection CB Anchor Series are perhaps the most proven fall protection anchors on the market. CB Anchors are compatible for installation onto wood, steel, and concrete substrates (fasteners are included for wood and steel applications). The anchor post functions to extend though roofing so that it is accessible both during and after roof construction, and is compatible for use with SRLs, vertical lifelines, horizontal lifelines, and shock absorbing lanyards. CB Anchors are...

Each Kit Contains: Lightweight, Universal Fit Full Body Harness XL-2XL (Guardian #37016): Features our Impact Indicator tag that deploys if the harness has been involved in a fall 5 Points of adjustment for added comfortTongue Buckle leg straps Padded shoulders increase comfort and reduce the fatigue caused by the weight of tools Reusable Roof Anchor with Attachment D-Ring (Guardian #00455): Easily installs on any pitched or flat surface roofs with screws included Once job is complete, remove...

5 Point Adjustment, Pass Thru Chest Buckle, Tongue Buckle Leg Straps Features:  Adjustable dorsal D-RingShoulder Pads / Harness Stretches in Shoulder and BackFriction pass-thru buckles, just lift the release tab to loosenImpact load indicatorCradle seatQuick adjusting torso buckles, two lanyard keepersAssembled in USAWater-repellant, contrasting core webbing Snap-on shoulder paddingErgonomic waist belt optionalWeight: 3.5 lbs Expanding upon the wide array of features offered by the...

The Guardian Fall Protection "Cyclone HUV Harness" is an ideal combination for fall arrest, work positioning, rescue and rope access applications. This harness was designed with a unique X-back which leaves the harness straps tangle free as well as a specially cushioned mesh net for better shock absorption. Combination buckles on the shoulder and leg straps make this harness very adjustable. It also features web keepers on the shoulder straps for easy placement of lanyards. The harness also...

The Halo Cable SRL has been part of the Guardian catalog for years, and for good reason. The updated Halo Class 1 SRL features a new digitally enabled QR code for instant access to product manual, declaration of conformity, technical data sheet, and other documentation. This SRL is designed to be used in a fall arrest application and is to be connected to an overhead anchor point. Built for max durability with a Metal housing, this SRL is designed to take on our customer's toughest tasks....

The Guardian Fall Protection Halo Anchor is a temporary and reusable roof anchorage connector. It is composed of 1/4 inch thick steel, a zinc-plated forged alloy steel O-ring, and can support loads up to 5,000 pounds. It may be used in both Fall Arrest and Restraint applications, and is supplied with all necessary fasteners. FEATURES: Removable/Reusable 1/4" thick steel roof anchorComplete with zinc plated forged alloy steel O-ringNail or bolt into the roof member)Designed to be removable, it...

The Cyclone Tower Harness offers an exceptional combination of durability, comfort, versatility, and value. It is ideal for high elevation and wind turbine combinations, including construction, maintenance, rescue, and evacuation. Featuring several attachment elements, ideally positioned elasticized straps for extended comfort, and specially cushioned mesh for improved shock absorption, this harness truly has it all. Combination buckles on the shoulder, waist, and leg straps allow for quick...

The original SRL-LE from Guardian The Halo Class 2 Self-Retracting Lifeline is part of Guardian’s strongest lineup of SRLs in the industry. This anchored Class 2 SRL is recognized throughout the industry for its superior performance. Packed full of useful features, the Halo SRL includes a QR code for instant access to product specifications and instructions, and a protective shock pack cover with integrated fall clearance charts. Built for max durability with a metal housing, this SRL is...

The Parapet Anchor System can be used for the placement of guardrail uprights, single point tie-off, or in conjunction with a horizontal rope lifeline. This product meets OSHA standards for guardrail and anchor point purposes. This anchor system acts as a single point tie-off and also integrates a safety pin for secure set up and adjustment so that the parapet anchor can fit a wall from four inches (4") to twenty inches (20") in width. The product is reinforced for long life, rated for 5,000...

The Checkmate Quadro Horizontal Lifeline is a temporary, reusable lifeline system that can be used by up to 4 workers simultaneously in Fall Arrest applications. It may span up to a maximum 82', and includes a rope bag for easy transportation and storage. This system can be easily set-up by just one person, but always ensure that all aspects of horizontal lifeline installation, inspection, and maintenance are supervised by a Qualified Person.Features:  Now offered under the Checkmate...

The Cyclone Harness offers superior comfort, styling, and safety. Our design engineers took the basics of what makes a harness effective and safe, and made holistic improvements to allow workers to do their jobs more comfortably and with added versatility, all without breaking the bank. They Cyclone features ultra-flow padding that helps keep moisture away from the body, and the double-grommeted tool belt provides the ultimate in support. A variety of buckle configurations are also available....

The Guardian Fall Protection "Cyclone HUV Harness" is an ideal combination for fall arrest, work positioning, rescue and rope access applications. This harness was designed with a unique X-back which leaves the harness straps tangle free as well as a specially cushioned mesh net for better shock absorption. Combination buckles on the shoulder and leg straps make this harness very adjustable. It also features web keepers on the shoulder straps for easy placement of lanyards. The harness also...

The Guardian Fall Protection Ridge-It Anchor line is designed for permanent use on wood rooftops. This Ridge-It model RIDG-1 is manufactured with a D-ring on one end and is 9—3/4" long, while the RIDG-2 is manufactured with 2 D-ring ends, and is 18" long. Ridge-It Anchors are composed highly durable stainless steel and zinc-plated steel, and are compliant with all applicable OSHA regulations. Ridge-It Anchors are easy to install, and are ideal for both residential construction and maintenance...

Expanding upon the wide array of features offered by the Series 1, the Guardian Series 3 full-body harness offers the worker at height an extra measure of comfort and performance. Series 3 harnesses feature durable water-repellant, contrasting core webbing that makes any damage easy to see, greatly improving the inspection process. Snap-on shoulder pads increase comfort and are removable for washing.The SRL connector loop allows you to mount a personal SRL while keeping the D-ring free for...

The Cyclone Harness offers superior comfort, styling, and safety. Our design engineers took the basics of what makes a harness effective and safe, and made holistic improvements to allow workers to do their jobs more comfortably and with added versatility, all without breaking the bank. They Cyclone features ultra-flow padding that helps keep moisture away from the body, and the double-grommeted tool belt provides the ultimate in support. A variety of buckle configurations are also available....

The Guardian Fall Protection Polydac Rope Vertical Lifeline Assembly is one of the strongest conventional rope assemblies available today. It is 100% resistant to rot and mildew, even if stored when wet, and has excellent resistance to alkalis and most solvents. It also provides good protection against abrasion, and has a melting point of over 300 degrees. Polydac Rope has a working load elongation of 8%, and absorbs more energy than any other type of rope available on the market—12 times as...

The Guardian Fall Protection CB Anchor Series are perhaps the most proven fall protection anchors on the market. CB Anchors are compatible for installation onto concrete substrates. The anchor post functions to extend though roofing so that it is accessible both during and after roof construction, and is compatible for use with SRLs, vertical lifelines, horizontal lifelines, and shock absorbing lanyards. CB Anchors are composed of durable, galvanized steel, and are an excellent choice for...

The Cyclone Harness offers superior comfort, styling, and safety. Our design engineers took the basics of what makes a harness effective and safe, and made holistic improvements to allow workers to do their jobs more comfortably and with added versatility, all without breaking the bank. They Cyclone features ultra-flow padding that helps keep moisture away from the body, and the double-grommeted tool belt provides the ultimate in support. A variety of buckle configurations are also available....

The Guardian Fall Protection Residential Guardrail System is a specialized bracket and guardrail assembly intended for steep roofs of pitches from 6/12 to 16/12. This versatile and lightweight system is easy to install and remove, and is compact for convenient storage. Composed of powder-coated steel, it is designed for superior durability and weather resistance. 2x6” toeboards are required for use with the Residential Guardrail System, and must be installed according to equipment instruction...