Fall Protection Anchors

Combo Safety Bar for 2×4 and 2×6 trusses The Safety Bar is a unique fall protection anchor for use while working with open truss situations. It spans 3 trusses and locks in securely with detent pins while gauging the trusses 24” on center. 2 users and tie off to the safety bar with the use of a shock absorbing lanyard or SRL’s. Our Safety Bar is the only product on the market for open framing fall protection and is used by framing crews across the country for OSHA compliance during the...

This D-ring anchor is 5K rated and can be bolted or welded on. This anchor is a single point anchorage for steel applications. The design allows for free moving movement of D-ring after installation.FEATURES Designed for free movingMinimum tensile strength 5,000 lbsZinc plated steel D-ringForged steel plateOverall Dimensions .25″ x 2.00″ x 4.50″Bolt on free moving D-ring anchor for steel applications Materials: Zinc plated steel D-ring; Forged steel plateWeight :1.20 lbs (0.54 kg)Weight...

The Malta Dynamics A6300 - Roof Anchor 12" Standard is a fixed post roof anchor, intended for permanent applications only. The A6300 has been thoroughly tested and is compatible for installation on steel and concrete substrates (fasteners sold separately). Meets the requirements for anchors rated for window cleaning. The 12-inch anchor post functions to extend though roofing materials so that it is accessible both during and after roof construction. The A6300 roof anchor is composed of durable...

This is a single sided D-ring anchorage device that are installed at the ridge, hip-ridge or in the field for permanent or temporary use. Permanent use anchors are supplied with stainless steel nail fasteners and a butyl strip flashing. The 8-1/2” length is idea for shingle type roofs allowing the anchor to be attached over the roofing material. The RS-10 is exactly ½ of our RetroFit anchor, making it an ideal complimentary anchor for hip ridges and shed roofs. Available with a “Dual Hole”...

The Guardian Fall Protection Cross Arm Strap is a reusable anchorage connector that can be used in a variety of fall protection applications. To use, loop over a steel support beam or other compatible anchor, and pull the small D-ring through the pass-through loop (or second, larger D-ring). Connect to the Cross Arm Strap D-ring with a compatible lanyard or SRL, and you are ready to work. Features: For use, strap loops around steel support beam or other compatible anchor and small D-ring...

The EcoAnchor was developed in direct partnership with CHECKMATE, an industry leading fall protection manufacturer in the UK, now part of the Pure Safety Group family of companies effective June 2018. Guardian is excited to offer the innovative EcoAnchor, a water filled neoprene counterweight fall arrest anchor system. This anchor has been tested and approved on a wide variety of low slope roofs, weighs less than 17 pounds when empty, and comes with a specialized carrying case for stowing. It...

FallTech's Ringed Plate Anchor provides a temporary safety solution for workers performing work on building exteriors and roofs. Installed over a truss on the field of wood frame structures, the Ringed Plate Anchor serves as a single user point for personal fall arrest and restraint systems. The fallTech Ringed Plate Anchor is ideal for use during tasks such as painting, siding, roofing, window cleaning, or general construction Features: Temporary fall protection for residential and light...

The Guardian Fall Protection Ridge-It Anchor line is designed for use on wood rooftops. This Ridge-It model RIDG-1 is manufactured with a D-ring on one end and is 9—3/4" long, while the RIDG-2 is manufactured with 2 D-ring ends, and is 18" long. Ridge-It Anchors are composed highly durable stainless steel and zinc-plated steel, and are compliant with all applicable OSHA regulations. Ridge-It Anchors are easy to install, and are ideal for both residential construction and maintenance...

Why Standing Seam Roofs Are Different All types of structures use standing seam roofs, from commercial and residential buildings to industrial complexes. When you work on a standing seam roof, it’s not the same as working on other types of roofs. You’ll need to approach anchorage differently than other types of roofing. Working on a slanted roof requires careful concentration because it may be easier to fall. You also need to use a different type of anchor than for wood and concrete. The...

Single-Use roof anchor with nails features user fold-bend to fit roof peaks. Single-use temporary anchor can be removed or hammered down.  Features 6" x 1-1/2" bend-in-place nailing plates with 3/4" connecting eyeIncludes 16D nails for roof ridge installation.For temporary use on wood structuresMeets OSHA 1926.502 regulations

The Guardian Fall Protection Cross Arm Strap is a reusable anchorage connector that can be used in a variety of fall protection applications. To use, loop over a steel support beam or other compatible anchor, and pull the small D-ring through the pass-through loop (or second, larger D-ring). Connect to the Cross Arm Strap D-ring with a compatible lanyard or SRL, and you are ready to work.Feature: Easy to installPass-through D-ring and loop modelsLightweight and durableMultiple lengths...

The 30° angle fixed length, factory engineered Horizontal Lifeline System is for use by 3 workers in fall restraint or 2 in fall arrest. This system is available in a 20’ kit with or without a carry bag. This 3rd party engineered horizontal line kit is a cost-effective way to have multiple workers on the roof with room to move freely. Engineering standards specify that a horizontal lifeline without an energy absorbing device subjected to fall hazards must have a 30° anchors between anchorage...

Fall Arrest rating for three workers and Fall Restraint for two. For Concrete applications, only 3 Workers for Fall Arrest and 2 for Fall Restraint. With the new job box and material rack, you will see safe and productive increases for your leading edge work. Includes Flat-Free Tires, 20 cf. Job Box (w/double door opening from the center) and a Material Rack. Additional 10 cf. job box and Raptor Alert available as an option. The TriRex was redesigned in 2011 from the ground up, based on...

Tie-Off Straps are made from 2” wide polyester or nylon and are designed for use as temporary anchorage points to connect vertical lifelines, SRL’s, web lanyard and rope lanyards. Use on wood, steel and concrete structures. Tie-Off straps are wrapped, cinched around the structure to make for a secure anchor or can be embedded into concrete and evacuated when finished with the job. Please see the part number list below for Application, Length, Compliance and Packaging information for all our...

The Guardian CB Anchor Point Install Screws comes in a bag of 40 and are used to install CB12 and CB18 anchorage connectors. These screws come in two different options: one for wood, and one for metal. Bag of 40 screwsWood and metal deck screws available#14-10 x 2" galvanized screws for wood

The Malta Dynamics Multi-Directional Roof Anchor supports one worker in fall arrest or two workers in fall restraint. The four directional connection points increase the working range (when detaching and reattaching to connection points). Workers can maintain both fall arrest or fall restraint.Metal Roof Installation: The minimum material thickness for steel decking is 22 gauage. Use twenty (20) #14-10, 2” hex-head self-drilling metal screws Wood Sheathing Roof Installation: The minimum...

Designed for production builders who want a robust anchor point during the framing and construction of the home but do not want to leave anything permanently attached to the structure. The decking is installed over the top of the anchor but the tie off straps stay exposed to the outside protecting all trades from fall hazards. It can also be utilized in a similar fashion to the Safety Bar. Here is how it works: Install the Truss Bar onto truss at predetermined locationsUse for fall protection...

The Parapet Roof Anchor by Tie Down Engineering provides a parapet wall fall protection anchor for work on lower-level surfaces. This parapet clamp works with retractable lanyards, vertical lifelines, and shock absorbing lanyards. Designed the Parapet Roof Anchor as the “go to” solution when roof penetration is not an option, these parapet wall roof anchors for fall protection feature a large easy-to-grip adjustment handle for quick set-up and proper securement. Tie Down Engineering maintains...

The Standing Seam Roof Anchor(SSRA1) is a revolutionary product allowing homeowners, building owners, and contractors to work safely on standing seam roofs without penetrating the panels. Engineered to revolutionize fall protection anchorage attachment on Standing Seam Roofs! The patented, non-penetrating design of this life-saving device is unlike anything currently available. It consists of a solid 6061-T6 aluminum body with 12 stainless steel set screws and 12 nylon tipped stainless steel...

Features:  For temporary use in existing openings during construction stages where doors and windows are not yet installedNo tools required with simple clamp-in non-penetrating, non-marring installation.Features telescoping adjustment for openings from 21" to 51" wideLight weight extruded aluminum construction with durable steel clamping feetMeets OSHA 1926.502 regulations ...

Weld-on D-Ring Anchor with Unplated Installation Plate Features: Forged D-ringPlain/Uncoated Steel Plate for Weld-on or Bolt-on ApplicationsCan be installed wherever weld-on applications are preferredProvides Simple Overhead Anchorage SolutionFor use on steel I-beams, columns and other steel structuresHeavy-duty steel construction2" x 4-1/2 plate with 1/2" holes Anchorage Location:  Select a suitable anchorage point that will support the strength requirement and minimize free fall and...

The Guardian Fall Protection Truss Boss Anchor Kit provides everything required for the set-up of a premium roof truss anchor. In addition to a non-corrosive Truss Boss Anchor, this kit also includes waterproof flashing for both composite and tile roofs, and also an anchor cap specially designed to protect the Truss Boss from weather, as well as to not blow off in high winds. The included Truss Boss can be installed on the truss while the truss is still on the ground for additional safety, and...

The Tie Down Two-Way Standing Seam Roof Anchor is able to fit most brands as well as styles of standing seam roofs. It is completely reusable and designed to be completely reversible allowing for seams up to 1 in. Designed to not cause damage and for one person single tie off as well can be used with retractable lanyards, vertical lifelines, and shock absorbing lanyards. Moving and storing on the job site is easy due to the compact size. Fall protection anchors are to be used in a horizontal...

The Parapet Wall Anchor installs easily onto existing parapet walls with no need for any additional tools or penetration of the wall surface. Suitable anchor point connection for work positioning or descent off a building roof or as the anchor point in your personal fall arrest system. Features:  Accommodates concrete parapets 2.36″ (6cm) to 14.17″ (36cm)Easy installation method for high productivityHigh strength steel constructionPortable and reusableBuilt-in tie-off D-ringNon-penetrating...

The new Falltech Chain Roof Anchor, is a highly portable and reusable anchor to be used on residential and commercial wood structures.  The Anchors O-Ring serves as the attachment point for either a PFAS or on HLL system. With it's heavy steel anchoring plates and flexible belted rubber center, the Chain Roof Anchor can be installed either on the ridge or on the field of a roof and may be used on flat or pitched surfaces. The Anchor is Easily installed with nails as a Single-Point anchor...

The PitchPro is a premier fall protection anchor designed for sloped-roof asphalt shingle construction. The PitchPro is the perfect solution for both new and existing construction, and its low-profile installation makes it an excellent choice for permanent applications. Its oversized connection point makes attaching and detaching easy and bind-free. Made from robust powder-coated steel, the PitchPro resists damage from repeated installations, and ensures the longest possible lifespan....

Self-drilling metal screws for use on the Guardian Skyhook and CB Roof Anchors. Bag of 40 screwsWood and metal deck screws available#14-14 x 2" galvanized screws for metal

The anchor can be installed as a retro/reroof application or in new construction on low- and high-profile tile and slate roofing material. This is a double D-ring anchor that measures 40” in between the D-rings which allows them be exposed just under the last course of tile. The unique design does not require a conventional flashing system because the anchor does not penetrate the sheeting. It installs with 8 spiral shank stainless steel nails and includes a butyl flashing strip to provide a...

SafeWaze Rivets for FrogLink Anchors 019-2005 & 019-2006  8 mm Gesipa Bulb Rivets

Introducing the newly redesigned PR 600 mobile anchoring system, now available at a lower price. This complete system, which includes a cart, ballast weights, and pivot plates, provides fall protection for up to three people, with two for fall arrest and one for fall restraint. The system is now lighter and easier to assemble and disassemble, making it easier to lift over ducts and piping that may lay over the roof's work surface. The component parts can even be taken up to the roof in an...

The Malta Dynamics Reusable Roof Anchor is a reusable anchorage connector designed for temporary use on wood rooftops. Our roof anchors fit all roof pitches from flat to 12/12 and their thick-plated steel construction means longer lasting product life. Supplied with all necessary fasteners.Key Features:● Meets OSHA 1910, OSHA 1926 Subpart M, and ANSI A10.32-12● Can be installed with screws or nails● Fits up to 12/12 roof pitch● Fasteners provided● For temporary use on wood rooftops● Worker...

The D-ShakL anchor can be mounted onto various surfaces and used in numerous ways – it is truly a universal anchor point. It is a 360-degree use anchor. Unlike other anchors, our forged D-ring is captured on the shackle with a spot-welded plate. This keeps the D-ring united with the anchor at all times, especially during installation in tough situations. The anchor is only 4.5” x 2.0” and can be mounted on the exterior or interior of structures. It can be installed onto wood framing, concrete...

Heavy-duty 1 3/4" polyester webbing with rugged forged alloy-steel hardware.3" wear pad protects primary webbing from cuts and abrasion.Ideal for I-beams and other properly rated structural members.Economical and lightweight.Can be used repeatedly.Meets the requirements of OSHA 1926 and ANSI Z359

12 cup tipped set screws - consumable tip for permanent attachment of the SSRA to standing seam panels. Perfect for contractors that need to have extra cup tipped screws on hand in case of droppage or loss.

The Guardian Screw-Down Metal Roof Anchor is a temporary and reusable anchor point, designed to be used with SRL's up to 50ft. in length. This anchor easily installs on Flat wood or Metal substrates, and allows for the attached SRL to rotate a full 360 degrees. Made from power-coated steel for increased durability.  Features: Can be used with most retractable lifelines up to 50ft. (or up to 65ft. in length if used in a combination with the retractable swivel adapter) Allows the...

The SSRA3 Universal Mounting Plate was engineered as a secure non-penetrating mounting solution for various equipment on standing seam roof systems. Constructed of 6061-T6 Aluminum and professionally tested to over 10,000 lbs., far beyond the strength of any roofing system. The SSRA3 is pre-drilled to accept the FallTech 7395A / 7395D Rotating SRD anchor and self retracting devices up to 65 ft. However, up to 12 additional mounting holes may be drilled to accept a wide range of equipment....

Self-drilling metal screws for use on the Guardian Skyhook and CB Roof Anchors.

The Guardian Fall Protection CB-1-B is a 6" x 6" bolt-on anchor for wood, steel, and concrete applications, and is permitted for use in combination with horizontal lifelines. This anchor is composed of steel, and is powder-coated for additional durability. It may be used in either vertical or horizontal installation applications. Fasteners not provided.Features: Easy to installCan attach to steel or concrete surfaces.Lightweight and DurableDee ring rotates 180 degrees.Permanent or temporary...

Malta Dynamics 6’ Cross Arm Strap includes a heavy-duty wear pad and reinforced stitching. This heavy-duty wear pad protects the structural webbing against abrasion. Each strap includes both a large D-ring and a standard D-ring for easy pass-thru. This beam strap is designed to be among the safest on the market. Manufacturer instructions before using this product

Does your jobsite feature a flat roof surrounded by a parapet wall? If it does, then you need a way to anchor your self-retracting lifelines (SRLs). Malta Dynamic's parapet clamp system allows you to put your SRL in place with a sturdy connection that helps support weight and keep your workers safe. The reusable device is easy to install and won’t cause damage to the wall. Your workers can use our parapet anchor on walls varying in thickness from 2.36″ to 14.1″. On a jobsite, time is critical,...

The Guardian Fall Protection Beamer 2000 is a versatile Fall Arrest anchor designed for use both overhead and at foot level. Attachable to both steel I and H beams, the Beamer 2000 offers Nylon bushings to provide smooth movement along the beam, that also function as impact indicators in the event of a fall. This extremely durable anchor also includes a precision machined aluminum bar and ratcheting end pieces, which allow for quick and easy adjustment with just one hand. When used at foot...

The SafeWaze 360° Roof Anchor is a temporary and reusable fall protection-anchor point, offering a full 360° working radius. Built for use on wood roofs and installs in seconds with the provided fasteners. • 360° Working radius• Zinc Plated Steel (Base), Painted Steel (Connection Point)• (6) 1/4” x 3” in Stainless lag screws for wood installation• Weight capacity: Single person - 310 lbs.(Including person, tools, and materials)• Minimum strength 5,000 lbs.• Meets:OSHA...

Malta Dynamics 4’ Cross Arm Strap includes a heavy-duty wear pad and reinforced stitching. This heavy-duty wear pad protects the structural webbing against abrasion. Each strap includes both a large D-ring and a standard D-ring for easy pass-thru. This beam strap is designed to be among the safest on the market. Please read and understand the manufacturer instructions before using this product

Permanent Truss Anchor Features 10-3/4" stainless steel post with 11/16" connecting eyeIncludes weather resistant post cap with zip-tie and 10" roof flange.4D stainless steel nails included for installation on wood roof trussesMeets OSHA 1926.502 regulationsInstalls on roof truss members 2 x 4 or largerKit includes weather flashing and capDurable Stainless steel construction for long lifeMay be installed before or after installation of roof sheathingAll fasteners included ...

Designed specifically for the Metal Building industry, our Super Z-Purlin provides an easy to install anchorage device that includes attachment bolts. The stem height of the anchor is compatible with high rib roofing panels and blanket type insulation. Waterproofing is achieved using a high quality E.P.D.M. gray colored flashing boot and matching stem cover that has an aluminum flange allowing it to be configured easily to any shape panel. The anchor stem features a collapsible design that...

The Guardian Fall Protection Concrete Swivel Anchor is specially designed to include a visual indicator that allows the user to clearly see when it is installed correctly (when proper torque is reached, the red cap will break away to display a green cap). This anchorage connector is composed of galvanized steel, making it capable of functioning in a variety of rough environments, and rotates 180° to allow for increased mobility.Features:  Easy to installVisual indicatorPivots and swivels...

The Malta Dynamics Single Use Roof Anchor is a handy addition to the roofer’s toolbox. It can be easily bent over the peak of the roof or manipulated to match the pitch of your roof. Because of its versatility and durability, this adjustable pitch anchor creates a reliable tie-off point for your lifeline without causing lasting damage to the rooftop. When installing on the roof, make sure to locate the roof’s crossbeam so that you are anchoring into a strong and solid surface that can support...

This 15′ webbing anchor with a ratchet strap, designed for use around columns and posts. The ratchet allows for the anchor to stay in the correct position on the column.FEATURES Ratcheting tensioner, 15′ lengthFor use around booms, columns and posts Attachment Points: D-RingMaterials: 2” Double-locking ratchet buckle, breaking strength > 10,000 lbs 2” Polyester webbing, breaking strength > 5,000 lbs High-strength polyester stitches, breaking strength > 40 lbs Heat-treated alloy steel...