Fall Protection

The Guardian Fall Protection Poly Steel Rope is ideal for high-moisture environments. Nylon rope, when wet, will typically reduce in strength by between 10% to 15%, but unlike Nylon, Poly Steel Rope does not absorb water, so will not diminish in strength in wet conditions. This rope is also particularly strong when it comes to resisting damage from ultraviolet light, and its synthetic composition makes it especially resistant to cuts and abrasion, thereby increasing equipment lifetime. Poly...

To support your workers and ensure they go home safe at the end of the day, your business needs harnesses specifically for working at heights. No matter what type of construction projects your company is working on, a pass-thru harness will securely connect to safety lines and protect your workers. By reducing impact and keeping workers from falling onto the ground, you can experience peace of mind knowing accidents won’t become casualties on your job site. The Malta Dynamics Warthog Full-Body...

The new Velocity Harness by Guardian Fall Protection brings the best economy harness to the market. Our engineers revamped the tired old basic harness into a higher quality product that your employees and customers will enjoy. Features : Back D-Ring Dual Lanyard Keepers: Other manufacturers provide only one or none on their economy harness. (Picture #3) Identification: Now your employees can personalize their harnesses without jeopardizing the integrity of the webbing. (Picture #4) Finished...

FEDERAL OSHA 1926.502(B)(3): Guardrail system shall be capable of withstanding, without failure, a force of at least 200 pounds (890N) applied within 2 inches (5.1 cm) of the top edge, in any outward or downward direction, at any point along the top edge. PRODUCT SPECIFICATIONS: Base: Durable high strength plastic Dimensions: 8½ (L) x 5¾ (W) x 5¼ (H) FEATURES: Durable high strength plastic Pliable, yet flexible to withstand harsh job-site environments and abuse Reusable Safety orange for high...

The Guardian Fall Protection Double-Locking Carabiner with 3/4" gate (made from either steel or aluminum) is specially designed to be both supremely durable and easy to use. The gate is certified to withstand loads up to 3,600 pounds, is self-closing and self-locking, and can be opened with just one hand. All Double-Locking Carabineers are compliant with the most current ANSI and OSHA regulations.Features:  Easy to use, one hand operationRated to 5,000 lbs. along major axis, and 3,600...

The Guardian Fall Protection Cross Arm Strap is a reusable anchorage connector that can be used in a variety of fall protection applications. To use, loop over a steel support beam or other compatible anchor, and pull the small D-ring through the pass-through loop (or second, larger D-ring). Connect to the Cross Arm Strap D-ring with a compatible lanyard or SRL, and you are ready to work.Feature: Easy to installPass-through D-ring and loop modelsLightweight and durableMultiple lengths...

Ensure safety and compliance on your worksite with Spar-Marathon's Warning Line System. This system is engineered to provide quick setup and reliable protection. Key Features: OSHA Compliant: Meets OSHA Standard 29 CFR 1926.502(f) to ensure workplace safety.Effortless Setup: Designed for quick and easy installation, saving you time and labor costs.Portable and Lightweight: Each stand weighs just 34 lbs., making it easy to transport and set up on site.Flexible Configuration: Recommended spacing...

The PitchPro is a premier fall protection anchor designed for sloped-roof asphalt shingle construction. The PitchPro is the perfect solution for both new and existing construction, and its low-profile installation makes it an excellent choice for permanent applications. Its oversized connection point makes attaching and detaching easy and bind-free. Made from robust powder-coated steel, the PitchPro resists damage from repeated installations, and ensures the longest possible lifespan. Feat...

The Guardian Fall Protection Rope Grab is easy to install and is designed to lock automatically in the event of a fall. Rope Grabs are available in a variety of configurations, are compatible with 5/8" safety ropes, and are supremely durable. Removable rope grabs are easy to installFits 5/8" safety ropesLock automatically when a fall occursApplicable Standards: OSHA 1926 Subpart M and OSHA 1910Worker Capacity Range: 130-310 lbs.Material: Galvanized steelMin. Breaking...

The Guardian Fall Protection Stretch Lanyard is ideal for work in tight spaces or around machinery, since its stretching capability helps reduce hazards of tripping or catching on moving parts. This lanyard stretches from between 4-1/2 to 6 feet. It is supremely lightweight, and its unique design eliminates the need for an external shock absorber. Features: 1" Nylon WebbingClear shock absorbing pack for easy inspectionAlways ANSI compliant 3,600 lb. / Double Lock Steel Rebar Snap hooks,...

The Guardian Fall Protection Snappy Anchor is a disposable anchorage connector designed to fit a wide variety of wood roof pitches. The Snappy is convenient, easy to install and remove, and meets all applicable OSHA regulations. To use, simply adjust the Snappy to fit over selected roof ridge, then nail into roof truss using all fastener installation holes. Supplied with all necessary fasteners. Features:  Single UseCan be bent to fit any roof pitch Convenient and disposable Easy to...

The D-Minus anchor is our most economical fall arrest anchor and is available in gray powder coated 11-gauge mild steel or 11-gauge 430 stainless steel. Installs with 6 factory supplied stainless steel spiral shank nails or an optional #12 screws. This anchor is specified for use on asphalt shingle roofing and is low profile making them difficult to notice on the roof. This anchor can be used for new construction, reroof or retrofitting onto existing roofs. In addition, this anchor can be used...

The newly designed Safe-T Ladder Gate, with improved labeling placement and increased spring strength easily swings open to allow a worker to pass from a ladder to the rooftop. It includes a self closing mechanism to prevent falls through the ladder rail opening. Its both lightweight and durable, and is compliant with all applicable OSHA regulations. Features: LightweightDurableCompliant with all applicable OSHA regulationsMaterial: Powder-coated Steel **Guardian Safe-T Ladder Extensions Sold...

FT Basic 6' Shock Absorbing Single Leg Lanyard with 2 Snap Hooks Features Rugged 1" polyester webbing which provides extreme UV resistance 3,600 lbs gate strength on all steel connectors Tear-away absorber design limits fall forces to 900 lbs or less. Features: 3,600 lbs gate strength on all steel connectionsTear-away absorber design limits forces to 900 lbs or lessPolyester label cover protects warning & inspection labelsRugged 1" polyester webbing provides extreme UV resistanceTraditional...

The Guardian Fall Protection Halo Series Web Self-Retracting Lifeline (SRL), formerly the Edge Series Web SRL, is designed with a specialized quick-action braking system, and is manufactured from non-corrosive, lightweight components. Extremely durable and compact, Halo SRLs will stand up to even the harshest working conditions.Features: -Carabiner included-Durable aluminum housing-Swivel topApplicable Standards: ANSI Z359.14-14, ANSI A10.32-12, OSHA 1926 Subpart M, OSHA 1910Worker...

The Acro parapet guardrail system allows contractors to setup fall protection quickly and safely without additional hardware. This system does not penetrate the building or roof substrate, and has a safety bracket that simply locks onto parapet with adjustable hand screw and cross rails that require no tensioning. This parapet wall bracket comes with a guardrail post holder and a second post to hold two 2' x 4' boards. When the 2ft x 4ft boards are inserted through the post slots in...

A full-body harness, which is an integral part of a personal fall arrest protection system, helps keep your workers safe — no matter if they are working on a construction site or performing rescue work. When connected to a safety line, these nylon, polyester and steel harnesses protect vital organs and prevent casualties by safeguarding wearers from falling to the ground.The Warthog Full-Body Harness with Tongue Buckle Legs is the best available economy harness on the market. Classified as a...

Self-closing and double-locking gate function with 7/8" open capacityOne-hand operation for quick connection of fall arrest system components.For multi-purpose, multi-use applications within a wide range of connecting scenarios3-1/4" x 1-3/8" inside dimensionsComplies with ANSI Z359.12-2009Rugged forged alloy steel constructionOne-hand operation provides user with ease of use even when wearing glovesCompact Twist Lock3,600 lbs. Gate ...

Replacement shock for the AES Raptor Tri-Rex mobile fall protection cart.

The Qualcraft Corner Buddy Ladder Stabilizer is ideal for providing additional stability for ladder work at corners and at flat, round or multidimensional construction surfaces. It easily connects to nearly any ladder, is lightweight, and powder coated for additional durability and weather resistance. The corner buddy is specially designed with rubber bumpers for added protection. If you're in the market for a ladder stabilizer, there is nothing better than the corner buddy.Features: Transport...

The Guardian Fall Protection CB Anchor Series are perhaps the most proven fall protection anchors on the market. CB Anchors are compatible for installation onto wood, steel, and concrete substrates (fasteners are included for wood and steel applications). The anchor post functions to extend though roofing so that it is accessible both during and after roof construction, and is compatible for use with SRLs, vertical lifelines, horizontal lifelines, and shock absorbing lanyards. CB Anchors are...

Each Kit Contains: Lightweight, Universal Fit Full Body Harness XL-2XL (Guardian #37016): Features our Impact Indicator tag that deploys if the harness has been involved in a fall 5 Points of adjustment for added comfortTongue Buckle leg straps Padded shoulders increase comfort and reduce the fatigue caused by the weight of tools Reusable Roof Anchor with Attachment D-Ring (Guardian #00455): Easily installs on any pitched or flat surface roofs with screws included Once job is complete, remove...

Single D-ring, Permanent Roof Anchor with Stainless Steel Body; Fastens Under Shingles, Leaving D-ring Exposed for Attachment; 19" Including D-ring with 17" Nailing Surface. Features:  Designed for under-tile roof ridge or field installationFeatures 17" stainless steel nailing plate with 2" connecting D-ring.Includes 16D stainless steel nails for installation to wood roof structuresMeets OSHA 1926.502 regulations Please read and understand the manufacturer instructions before using this...

Safety Bar Temporary/Reusable Anchor The Safety Bar is a unique fall protection anchor for use while working with open truss situations. It spans 3 trusses and locks in securely with detent pins while gauging the trusses 24” on center. 2 users and tie off to the safety bar with the use of a shock absorbing lanyard or SRL’s. Our Safety Bar is the only product on the market for open framing fall protection and is used by framing crews across the country for OSHA compliance during the absolute...

FallTech connectors are tested to comply with current ANSI standards and built for a wide range of workplaces. FallTech has worked hard to make sure that when you need to be connected, you have the right equipment for the job. Hinged design allows user installation at any point on the lifelineTrailing mobility follows ascending and descending user with minimal effort.Cam-action braking design quickly locks on the lifeline to arrest the fallTension roller and internal spring maintain lifeline...

5 Point Adjustment, Pass Thru Chest Buckle, Tongue Buckle Leg Straps Features:  Adjustable dorsal D-RingShoulder Pads / Harness Stretches in Shoulder and BackFriction pass-thru buckles, just lift the release tab to loosenImpact load indicatorCradle seatQuick adjusting torso buckles, two lanyard keepersAssembled in USAWater-repellant, contrasting core webbing Snap-on shoulder paddingErgonomic waist belt optionalWeight: 3.5 lbs Expanding upon the wide array of features offered by the...

The Moveable ARS Anchor follows the same design principles as our ARS Permanent Roof Anchors. This is designed for the framing tradesmen that need a quick, easy anchorage connector for their lanyards, lifelines or SRL’s. Made from 11-gauge steel that is powder coated. Comes with a 3/8” stainless steel detent pin with elastic tether. Heavy Duty 11-gauge steel construction2 models cover 2×4 trussesStainless Steel locking detent pinRated for OSHA Fall ArrestPowder Coated for Durability Please...

The RS-20 anchor is a permanent roof anchor designed specifically for tile, slate, wood and synthetic roofing materials. The 20” long strap allows you to adjust the reveal of the D-ring for your specific roofing material and the unique design of the anchor also allows you to physically bend the D-ring portion of the anchor up and over the tile or slate so that it lays flat on the surface. This permanent, low profile anchor comes with stainless steel attachment hardware and comprehensive...

The Guardian Fall Protection "Cyclone HUV Harness" is an ideal combination for fall arrest, work positioning, rescue and rope access applications. This harness was designed with a unique X-back which leaves the harness straps tangle free as well as a specially cushioned mesh net for better shock absorption. Combination buckles on the shoulder and leg straps make this harness very adjustable. It also features web keepers on the shoulder straps for easy placement of lanyards. The harness also...

Workers on the Roof Cannot Use Their Air Guns Without Being Tied-Off to Their Vertical MAX X-Line The X-Line is a personal fall arrest lifeline with a patented, integral ¼” air hose inside our 12-Strand HD Lifeline. The result is a completely integrated system for roofers that reduces rope management issues and tripping hazards. Less rope management means faster roofing, too. Ideal for construction trades using air guns. This is a safety tool for the professional roofer that is looking for the...

The Halo Cable SRL has been part of the Guardian catalog for years, and for good reason. The updated Halo Class 1 SRL features a new digitally enabled QR code for instant access to product manual, declaration of conformity, technical data sheet, and other documentation. This SRL is designed to be used in a fall arrest application and is to be connected to an overhead anchor point. Built for max durability with a Metal housing, this SRL is designed to take on our customer's toughest tasks....

Heavy Duty steel carabiner used to securely attach lifelines, lanyard, energy absorbers and other items in your fall arrest system. Zinc plated finish with twist lock gates that require two functions to open. These have a higher tensile strength rating and smaller diameter body that the aluminum carabiners. Weighs in at 8.8 ounces. Gate strength is 3,600 pounds and complies with all current ANSI regulations. Features 25kn Tensile StrengthZinc Plated SteelDouble Locking Mechanism3/4” (19mm)...

Enhance your ladder safety and stability with Tie Down's Corner Ladder Stabilizer. Weighing only 5 lbs., this lightweight and durable aluminum structure ensures secure footing on corners, reducing the risk of slips and accidents. With an 18" stand-off on flat surfaces, it provides ample space for comfortable and secure ladder positioning. The stabilizer comes complete with rubber caps and hardware, making installation quick and hassle-free. LIGHTWEIGHT ALUMINUM: Weighing only 5 lbs., this...

The Guardian Fall Protection Halo Anchor is a temporary and reusable roof anchorage connector. It is composed of 1/4 inch thick steel, a zinc-plated forged alloy steel O-ring, and can support loads up to 5,000 pounds. It may be used in both Fall Arrest and Restraint applications, and is supplied with all necessary fasteners. FEATURES: Removable/Reusable 1/4" thick steel roof anchorComplete with zinc plated forged alloy steel O-ringNail or bolt into the roof member)Designed to be removable, it...

The Standing Seam Roof Anchor(SSRA1) is a revolutionary product allowing homeowners, building owners, and contractors to work safely on standing seam roofs without penetrating the panels. Engineered to revolutionize fall protection anchorage attachment on Standing Seam Roofs! The patented, non-penetrating design of this life-saving device is unlike anything currently available. It consists of a solid 6061-T6 aluminum body with 12 stainless steel set screws and 12 nylon tipped stainless steel...

For use on wood framed structures that can be mounted at the ridge or in the field. Can be installed with nails (supplied) or screws and used to connect your vertical lifeline, SRL or lanyard to for fall protection. Made from 11-gauge zinc coated steel. Replacement anchor for many fall protection kits/buckets found in the market today.Features:  Industry Standard Design with Hinged D-RingUse up to a 20/12 Pitch or Flat on the DeckRated for OSHA 5,000 pounds Fall ArrestInstall with Nails...

The Suspension Trauma Relief System is designed to be installed on an existing full body harness to provide relief from suspension trauma until rescue can be implemented. Helps to prevent the On-Set of suspension trauma in the event of a fallInfinitely adjustable to fit any user regardless of heightTwo-Part system easily attaches to the front torso of any full body harnessAccommodates both feet, giving the user stability and the ability to shift and move to remain comfortable2-part UniFit...

The Cyclone Tower Harness offers an exceptional combination of durability, comfort, versatility, and value. It is ideal for high elevation and wind turbine combinations, including construction, maintenance, rescue, and evacuation. Featuring several attachment elements, ideally positioned elasticized straps for extended comfort, and specially cushioned mesh for improved shock absorption, this harness truly has it all. Combination buckles on the shoulder, waist, and leg straps allow for quick...

The original SRL-LE from Guardian The Halo Class 2 Self-Retracting Lifeline is part of Guardian’s strongest lineup of SRLs in the industry. This anchored Class 2 SRL is recognized throughout the industry for its superior performance. Packed full of useful features, the Halo SRL includes a QR code for instant access to product specifications and instructions, and a protective shock pack cover with integrated fall clearance charts. Built for max durability with a metal housing, this SRL is...

Double D-ring; Permanent Roof Anchor with Stainless Steel Body; Fastens Under Shingles, Leaving D-rings Exposed for Attachment; 17" Including D-rings with 12" Nailing Surface. Features: Designed for installation under roof ridge capFeatures 12" stainless steel nailing plate with 2-1/4" connecting D-rings.Includes 16D stainless steel nails for installation to wood roof structuresMeets OSHA 1926.502 regulations Please read and understand the manufacturer instructions before using this product. ...

The Parapet Anchor System can be used for the placement of guardrail uprights, single point tie-off, or in conjunction with a horizontal rope lifeline. This product meets OSHA standards for guardrail and anchor point purposes. This anchor system acts as a single point tie-off and also integrates a safety pin for secure set up and adjustment so that the parapet anchor can fit a wall from four inches (4") to twenty inches (20") in width. The product is reinforced for long life, rated for 5,000...

The Checkmate Quadro Horizontal Lifeline is a temporary, reusable lifeline system that can be used by up to 4 workers simultaneously in Fall Arrest applications. It may span up to a maximum 82', and includes a rope bag for easy transportation and storage. This system can be easily set-up by just one person, but always ensure that all aspects of horizontal lifeline installation, inspection, and maintenance are supervised by a Qualified Person.Features:  Now offered under the Checkmate...

The Guardian Fall Protection "Premium Cross Arm Straps" are twice as durable with dual enforced webbing and heavy duty stitching. The heavy duty wear pad protects the structural webbing against abrasion and snags. Each strap features a large D-ring and standard size D-ring for pass-thru, which increases the versatility of length adjustment. To shorten the anchorage connector, simply wrap the webbing around the anchorage and pass through the large D-ring. FEATURES: Twice as durable with dual...

The Cyclone Harness offers superior comfort, styling, and safety. Our design engineers took the basics of what makes a harness effective and safe, and made holistic improvements to allow workers to do their jobs more comfortably and with added versatility, all without breaking the bank. They Cyclone features ultra-flow padding that helps keep moisture away from the body, and the double-grommeted tool belt provides the ultimate in support. A variety of buckle configurations are also available....

The Malta Dynamics 18” D-Ring Extender offers a quick and easy way to add length to the back D-Ring of harnesses. Users can more easily attach their lanyards while wearing a harness. The 18” D-Ring Extender’s snap hook component attaches directly to the dorsal D-Ring of the harness. The 18” D-Ring Extender is now the new connection point to the harness. Just connect your lanyard to the O-Ring on the extension and you’re all set. This safety harness extender is not appropriate for use in...

The Guardian Fall Protection "Cyclone HUV Harness" is an ideal combination for fall arrest, work positioning, rescue and rope access applications. This harness was designed with a unique X-back which leaves the harness straps tangle free as well as a specially cushioned mesh net for better shock absorption. Combination buckles on the shoulder and leg straps make this harness very adjustable. It also features web keepers on the shoulder straps for easy placement of lanyards. The harness also...

Mobile Fall Protection Systems are a great solution when there’s no place for workers to tie-off for fall protection! However, the mounting and positioning of self-retracting lifelines (SRL’s) on mobile fall protection carts is problematic. Problem #1: Currently, SRL’s are NOT being positioned according to manufacturer guidelines on mobile fall protection carts! According to DBI/Sala’s guidelines for SRL use in horizontal or near horizontal applications, “The SRL should be positioned on it’s...

The Guardian Fall Protection Ridge-It Anchor line is designed for permanent use on wood rooftops. This Ridge-It model RIDG-1 is manufactured with a D-ring on one end and is 9—3/4" long, while the RIDG-2 is manufactured with 2 D-ring ends, and is 18" long. Ridge-It Anchors are composed highly durable stainless steel and zinc-plated steel, and are compliant with all applicable OSHA regulations. Ridge-It Anchors are easy to install, and are ideal for both residential construction and maintenance...