Fall Protection

The Malta Dynamics A6301 - Roof Anchor 18" Standard is a fixed post roof anchor, intended for permanent applications only. The A6300 has been thoroughly tested and is compatible for installation on steel and concrete substrates (fasteners sold separately). Meets the requirements for anchors rated for window cleaning. The 12-inch anchor post functions to extend though roofing materials so that it is accessible both during and after roof construction. The A6301 roof anchor is composed of durable...

The Guardian Fall Protection Polydac Rope Vertical Lifeline Assembly is one of the strongest conventional rope assemblies available today. It is 100% resistant to rot and mildew, even if stored when wet, and has excellent resistance to alkalis and most solvents. It also provides good protection against abrasion, and has a melting point of over 300 degrees. Polydac Rope has a working load elongation of 8%, and absorbs more energy than any other type of rope available on the market—12 times as...

OSHA regulation 1926.502(D)(20) states "The employer shall provide for 'prompt' rescue of employees in the event of a fall or shall assure that employees are able to rescue themselves. OSHA points to research that indicates suspension in a fall arrest device can result in unconsciousness followed by death in less than 30 minutes. An Air Force study shows that volunteers suspended in harnesses experienced adverse health effects in as little as 12 to 15 minutes. Some safety experts say damage...

#1 selling anchor for reroof, new construction and remodeling. The low-profile design is aesthetically pleasing and is designed to last the life of the structure. The Retro-Fit is designed to give all who access the roof a reliable tie-off point. Installs with just 8 nails and comes with special butyl waterproof flashing strips to seal the stainless-steel nails. Fabricated with 430 stainless steel and certified for over 5,000 pounds. Use over asphalt shingle, wood shake or metal roofing, the...

The Guardian Fall Protection CB Anchor Series are perhaps the most proven fall protection anchors on the market. CB Anchors are compatible for installation onto concrete substrates. The anchor post functions to extend though roofing so that it is accessible both during and after roof construction, and is compatible for use with SRLs, vertical lifelines, horizontal lifelines, and shock absorbing lanyards. CB Anchors are composed of durable, galvanized steel, and are an excellent choice for...

The Cyclone Harness offers superior comfort, styling, and safety. Our design engineers took the basics of what makes a harness effective and safe, and made holistic improvements to allow workers to do their jobs more comfortably and with added versatility, all without breaking the bank. They Cyclone features ultra-flow padding that helps keep moisture away from the body, and the double-grommeted tool belt provides the ultimate in support. A variety of buckle configurations are also available....

Our 100% polyester rope lifelines can be ordered in a multitude of lengths to suit the specific needs of your job site.FEATURES Assembled from our high quality 100% polyester ropeAvailable in various lengths available: 25′, 50′, 75′ 100′, 150′, 200′, and 250' Materials: 100% polyester rope; forged steel snap hook 3,600 lbs Gate-rated; Min breaking strength > 5,000 lbsWeight: Variable, depending on the lengthLength: Various lengths available: 25 ft (7.62 m), 50 ft (15.24 m) ,75 ft (22.86...

RACE Skylight Net | An Enhanced Level of Safety The RACE Skylight Net fits onto raised-lip skylights or hatch openings with a minimum 2″ vertical lip surface. They are designed to contain a load of 1,000 lbs. The net is manufactured using Safety Orange 1-1/2″ High Tenacity Polypropylene (HTPP) with a 4″ square mesh. Each net is reinforced with sewn rope borders. Unlike other skylight nets, the RACE Skylight Net does not use the skylight as an anchor point and won't damage the skylight if...

Redesigned from the ground up, the Guardian Series 1 full-body harness is the perfect entry-level harness solution, and is ideal for outfitting large crews, roofing, contracting, general industry, and much more. Series 1 harnesses feature durable water-repellent, contrasting core webbing that makes any damage easy to see, greatly improving the inspection process. Webbing ends are folded and stitched with rubber tabs for durability, and rubber web keepers prevent loose straps from interfering...

Works with Steep Pitch Guardrail System (#12070) to Form Complete Residential Protection Use Acro’s exclusive 12075 Open-edge Guardrail Brackets on rake-edges of any pitch and eave-edges under 4/12 pitch. Commonly used in conjunction with Acro’s proven 12070 Steep-pitch Guardrail Brackets along the eave-edges from 4/12 to 16/12, to form the backbone of a complete residential guardrail system. Two sets of 2 x 4's are used with a toe board to form a continuous guardrail around the entire roof...

The Guardian Fall Protection Extension Lanyard offers the convenient option of lengthening a full-body harness dorsal D-ring, making it easier to attach to. The snap hook component of the Extension Lanyard attaches directly to the dorsal D-ring, and then the Extension Lanyard D-ring becomes the new harness connection point. This product is ideal for workers who cannot comfortably reach their harness dorsal D-ring, as well as to attach a shock absorbing component to a lanyard that is not...

The Reusable Roof Anchor is built with durable zinc steel and is ideal for temporary use on wood or metal roofs. The anchor hinge design allows it to be screwed or nailed in position on roofs ranging from flat to sheer. Features:  Installed on peak or flat wood and metal decking roofs.Hinged construction for adjustment to different angles.Corrosion-resistant plated steel.Large D-Ring connection point.Fasteners NOT included.   ...

The Guardian Fall Protection Extension Lanyard offers the convenient option of lengthening a full-body harness dorsal D-ring, making it easier to attach to. The snap hook component of the Extension Lanyard attaches directly to the dorsal D-ring, and then the Extension Lanyard D-ring becomes the new harness connection point. This product is ideal for workers who cannot comfortably reach their harness dorsal D-ring, though it is always important to consider the 18 inch fall clearance and free...

The Guardian Fall Protection Residential Guardrail System is a specialized bracket and guardrail assembly intended for steep roofs of pitches from 6/12 to 16/12. This versatile and lightweight system is easy to install and remove, and is compact for convenient storage. Composed of powder-coated steel, it is designed for superior durability and weather resistance. 2x6” toeboards are required for use with the Residential Guardrail System, and must be installed according to equipment instruction...

When there is no margin for error on your job site, FallTech Self-Retracting Lifelines (SRLs) deliver quick stopping power with minimal impact to the body and anchor point. Rugged, reliable and built to meet the industry’s highest standard, FallTech's SRLs bring safety and consistency to even the most challenging work environments. 3/16" galvanized steel cable lifeline with load-indicating swivel snap hookFeatures glass-filled nylon housing for durable impact resistance.Lifeline includes...

Bolt-on D-Ring Anchor with Installation Plate  Features: Forged D-ring and Bolt-on PlateProvides Simple Overhead Anchorage SolutionFor use on steel I-beams, columns and other steel structuresHeavy-duty steel construction2" x 4-1/2 plate with 1/2" holesComplies With ANSI Z359.18-2017  Features 2" x 4-1/2" alloy steel anchoring plate and D-ring1/2" bolt holes require user-supplied fasteners for fixed position installation.Complies with ANSI Z359.18-2017 Anchorage Location: Select...

The Guardian Fall Protection Extension Lanyard offers the convenient option of lengthening a full-body harness dorsal D-ring, making it easier to attach to. The snap hook component of the Extension Lanyard attaches directly to the dorsal D-ring, and then the Extension Lanyard D-ring becomes the new harness connection point. This product is ideal for workers who cannot comfortably reach their harness dorsal D-ring, though it is always important to consider the 18 inch fall clearance and free...

Stanchion easily slips out of the weighted base plate for easy transport and storage For Asphalt or Metal Roofs Complies with OSHA’s (Std-29 CFR)(1926.502) (f) Quick set up Priced per stand Recommended spacing: Every 50 ft.Uses: Rooftops, construction sites, parking lots, high rise construction, manufacturing facilities, maintenance contractors, office buildings, amusement parks, airports, warehousesBase = 24" x 24" & 40 lbs. ...

Malta Dynamics Warthog® Series Self-Retracting Lifelines (SRLs) are some of the most durable SRLs on the market. They feature a galvanized steel cable and a high-strength thermoplastic polymer housing for enhanced durability. This 50′ retractable lanyard makes it easy for workers to move around safely, thanks to its convenient swivel top connection point and handy gripping snout. What’s more, all of our Warthog® SRLs are tested to meet strict ANSI protocols and OSHA standards, including ANSI...

The Guardian Fall Protection Polydac Rope Vertical Lifeline Assembly is one of the strongest conventional rope assemblies available today. It is 100% resistant to rot and mildew, even if stored when wet, and has excellent resistance to alkalis and most solvents. It also provides good protection against abrasion, and has a melting point of over 300 degrees. Polydac Rope has a working load elongation of 8%, and absorbs more energy than any other type of rope available on the market—12 times as...

Ideal for metal and steel roofs, the 019-4006 permanent anchor features a special built-in energy absorber while offering a 360° working radius. The anchor can be used as a single anchor point or as part of a horizontal lifeline system. This anchor can also be used temporarily. FEATURES: Stainless steel construction360° working radiusBuilt-in energy absorber reduces stress & damage to the structureInstalls with 7, 8 mm Gesipa Bulb Rivets (included)Single User ...

Fall Arrest rating for two workers and Fall Restraint for two. For Concrete applications, only 2 Workers for Fall Arrest and 3 for Fall Restraint. With the new job box and material rack, you will see safe and productive increases for your leading edge work. Includes Flat-Free Tires, 20 cf Job Box (w/double door opening from the center) and a Material Rack. Raptor Alert available as an option. Streamlined frame, removing any protrusions that might create tripping hazards Enlarged front...

The Guardian Fall Protection Single Stanchion is specially designed for use with a reusable warning line. An often overlooked option in the world of fall protection, warning lines and guardrail systems function to block worker from exposure to fall hazards, often entirely eliminating the need for other types of fall protection equipment. The Single Stanchion weighs only 23 pounds, is 39 inches tall, and is composed of powder-coated steel for superior durability and weather resistance. It is...

The Guardian Fall Protection Poly Steel Rope is ideal for high-moisture environments. Nylon rope, when wet, will typically reduce in strength by between 10% to 15%, but unlike Nylon, Poly Steel Rope does not absorb water, so will not diminish in strength in wet conditions. This rope is also particularly strong when it comes to resisting damage from ultraviolet light, and its synthetic composition makes it especially resistant to cuts and abrasion, thereby increasing equipment lifetime. Poly...

The Guardian Fall Protection Cross Arm Strap is a reusable anchorage connector that can be used in a variety of fall protection applications. To use, loop over a steel support beam or other compatible anchor, and pull the small D-ring through the pass-through loop (or second, larger D-ring). Connect to the Cross Arm Strap D-ring with a compatible lanyard or SRL, and you are ready to work.Feature: Easy to installPass-through D-ring and loop modelsLightweight and durableMultiple lengths...

Tie-Off Straps are made from 2” wide polyester or nylon and are designed for use as temporary anchorage points to connect vertical lifelines, SRL’s, web lanyard and rope lanyards. Use on wood, steel and concrete structures. Tie-Off straps are wrapped, cinched around the structure to make for a secure anchor or can be embedded into concrete and evacuated when finished with the job. Please see the part number list below for Application, Length, Compliance and Packaging information for all our...

The Guardian Fall Protection "Adjustable Lanyard", is ideal for positioning and restraint situations. The lanyard can be quickly adjusted from 4-6 Ft in length.  FeaturesLightweight and DurableWeight : 2 lbsLength : 4' to 6'Webbing Material : Polyester and NylonApplicable Standards : ANSI Z359.1-07, ANSI A10.32-12, OSHA 1926 Subpart M, OSHA 1910Worker Capacity Range : 130-310 lbs.Webbing Material(s) : Polyester and nylon Does not come with a shock absorber  ...

The Guardian Fall Protection Hold Me Rope Anchor, functions to integrate an anchorage connector with a vertical lifeline system. The anchor is certified to withstand loads up to 5,000 pounds. Its made from light weight and corrosion resistant aluminum. To use, install rope through the anchor and either connect it with a compatible carabiner to a separate anchorage connector, or loop around a compatible anchor point and pull through the anchor, and create a self-contained system. Its quick and...

The Guardian Fall Protection Stretch Lanyard is ideal for work in tight spaces or around machinery, since its stretching capability helps reduce hazards of tripping or catching on moving parts. This lanyard stretches from between 4—1/2 to 6 feet, and is available in a variety of connector options, as well as both single and double leg models. It is supremely lightweight, and its unique design eliminates the need for an external shock absorber. This product may be received with orange or black...

The Guardian Fall Protection 4-Way Plate Anchor supports one worker in fall arrest or two workers in fall restraint, and is suitable for installation onto wood, metal, or concrete. Its 4 connection points greatly increase the potential working range, as a worker can detach from a connection point, reattach to the opposite connection point, and be able to work in fall arrest or restraint on the other side of a building, all from the same anchor. Its 90-degree angles between its connection...

TEMPORARY SKYLIGHT PROTECTION The SkyNet™ is an easy-to-use, reusable, cost-effective solution for skylight fall protection. It’s user friendliness is attributed to it’s simple yet highly effective design. Simply lay a SkyNet™ over a curbed skylight or secured over an opening in the roof surface and you’re protected from falling through to the level below. WE ARE YOUR SECURITY NET In just a few minutes, you can set up this fall protection product. The result? Unparalleled peace of mind. In the...

The PitchPro is a premier fall protection anchor designed for sloped-roof asphalt shingle construction. The PitchPro is the perfect solution for both new and existing construction, and its low-profile installation makes it an excellent choice for permanent applications. Its oversized connection point makes attaching and detaching easy and bind-free. Made from robust powder-coated steel, the PitchPro resists damage from repeated installations, and ensures the longest possible lifespan....

The Guardian Fall Protection Polydac Rope Vertical Lifeline Assembly is one of the strongest conventional rope assemblies available today. It is 100% resistant to rot and mildew, even if stored when wet, and has excellent resistance to alkalis and most solvents. It also provides good protection against abrasion, and has a melting point of over 300 degrees. Polydac Rope has a working load elongation of 8%, and absorbs more energy than any other type of rope available on the market—12 times as...

Falls through skylights cause severe injuries and death. Now there's a quick and easy way to protect your workers AND allow them to work around a low slope rooftop skylight without being tied off! The RACE Rail Skylight Safety Kit is the first non-penetrating adjustable skylight protection system that allows unobstructed access to the roof surrounding the skylight and it takes just minutes to install! Adjustable to fit a 36" x 36" (3' x 3') skylight up to a 60" x 60" (5' x...

This D-ring anchor is 5K rated and can be bolted or welded on. This anchor is a single point anchorage for steel applications. The design allows for free moving movement of D-ring after installation.FEATURES Designed for free movingMinimum tensile strength 5,000 lbsZinc plated steel D-ringForged steel plateOverall Dimensions .25″ x 2.00″ x 4.50″Bolt on free moving D-ring anchor for steel applications Materials: Zinc plated steel D-ring; Forged steel plateWeight :1.20 lbs (0.54 kg)Weight...

Heavy-duty 1 3/4" polyester webbing with rugged forged alloy-steel hardware.3" wear pad protects primary webbing from cuts and abrasion.Ideal for I-beams and other properly rated structural members.Economical and lightweight.Can be used repeatedly.Meets the requirements of OSHA 1926 and ANSI Z359

The Guardian Fall Protection CB Anchor Series are perhaps the most proven fall protection anchors on the market. CB Anchors are compatible for installation onto wood, steel, and concrete substrates (fasteners are included for wood and steel applications). The anchor post functions to extend though roofing so that it is accessible both during and after roof construction, and is compatible for use with SRLs, vertical lifelines, horizontal lifelines, and shock absorbing lanyards. CB Anchors are...

Combo Safety Bar for 2×4 and 2×6 trusses The Safety Bar is a unique fall protection anchor for use while working with open truss situations. It spans 3 trusses and locks in securely with detent pins while gauging the trusses 24” on center. 2 users and tie off to the safety bar with the use of a shock absorbing lanyard or SRL’s. Our Safety Bar is the only product on the market for open framing fall protection and is used by framing crews across the country for OSHA compliance during the...

Heavy-duty 1 3/4" polyester webbing with rugged forged alloy-steel hardware.3" wear pad protects primary webbing from cuts and abrasion.Ideal for I-beams and other properly rated structural members.Economical and lightweight.Can be used repeatedly.Meets the requirements of OSHA 1926 and ANSI Z3591-3/4" load-bearing web with 3" wide full-length wear pad for abrasion resistanceAppropriately sized alloy steel D-rings provide simple pass-through choke-on installation.May be passed-through multiple...

The Shock Absorbing Lanyard is the premiere free fall lanyard offered by Guardian Fall Protection. It meets all the stringent ANSI Z359.13-2013 regulations, and the integrated shock absorbing component limits average arresting forces to 900 pounds or less. It is comprised of 1 inch nylon webbing, and is available in a variety of lengths and connector options, including steel and aluminum snap hooks and rebar hooks, all of which make it one of the most functional and durable lanyards on the...

The Malta Dynamics High Strength Steel Locking Carabiner is designed to be durable and easy to use. Its ANSI tested gate is certified to withstand loads up to 3,600 pounds. This carabiner is self-closing and self-locking, and can be opened with just one hand.

This is a single sided D-ring anchorage device that are installed at the ridge, hip-ridge or in the field for permanent or temporary use. Permanent use anchors are supplied with stainless steel nail fasteners and a butyl strip flashing. The 8-1/2” length is idea for shingle type roofs allowing the anchor to be attached over the roofing material. The RS-10 is exactly ½ of our RetroFit anchor, making it an ideal complimentary anchor for hip ridges and shed roofs. Available with a “Dual Hole”...

The Malta Dynamics A6300 - Roof Anchor 12" Standard is a fixed post roof anchor, intended for permanent applications only. The A6300 has been thoroughly tested and is compatible for installation on steel and concrete substrates (fasteners sold separately). Meets the requirements for anchors rated for window cleaning. The 12-inch anchor post functions to extend though roofing materials so that it is accessible both during and after roof construction. The A6300 roof anchor is composed of durable...

Workers on the Roof Cannot Use Their Air Guns Without Being Tied-Off to Their Vertical MAX X-Line The X-Line is a personal fall arrest lifeline with a patented, integral 1/4" air hose inside SAS's 12-Strand HD Lifeline. The result is a completely integrated system for roofers that reduces rope management issues and tripping hazards. Less rope management means faster roofing, too. Ideal for construction trades using air guns. This is a safety tool for the professional roofer that is looking for...

TEMPORARY SKYLIGHT PROTECTION The SkyNet™ is an easy-to-use, reusable, cost-effective solution for skylight fall protection. It’s user friendliness is attributed to it’s simple yet highly effective design. Simply lay a SkyNet™ over a curbed skylight or secured over an opening in the roof surface and you’re protected from falling through to the level below. WE ARE YOUR SECURITY NET In just a few minutes, you can set up this fall protection product. The result? Unparalleled peace of mind. In the...

The Guardian Fall Protection Cross Arm Strap is a reusable anchorage connector that can be used in a variety of fall protection applications. To use, loop over a steel support beam or other compatible anchor, and pull the small D-ring through the pass-through loop (or second, larger D-ring). Connect to the Cross Arm Strap D-ring with a compatible lanyard or SRL, and you are ready to work. Features: For use, strap loops around steel support beam or other compatible anchor and small D-ring...

The EcoAnchor was developed in direct partnership with CHECKMATE, an industry leading fall protection manufacturer in the UK, now part of the Pure Safety Group family of companies effective June 2018. Guardian is excited to offer the innovative EcoAnchor, a water filled neoprene counterweight fall arrest anchor system. This anchor has been tested and approved on a wide variety of low slope roofs, weighs less than 17 pounds when empty, and comes with a specialized carrying case for stowing. It...

The Guardian Fall Protection Ridge-It Anchor line is designed for use on wood rooftops. This Ridge-It model RIDG-1 is manufactured with a D-ring on one end and is 9—3/4" long, while the RIDG-2 is manufactured with 2 D-ring ends, and is 18" long. Ridge-It Anchors are composed highly durable stainless steel and zinc-plated steel, and are compliant with all applicable OSHA regulations. Ridge-It Anchors are easy to install, and are ideal for both residential construction and maintenance...