Features: Furnish and install the Portals Plus Extra Wide Alumi-Flash at all points where one penetration 2" - 6" in diameter penetrates the roof. The Extra Wide Alumi-Flash shall include a .060" spun aluminum base unit with a height of 4" and a base diameter of 18". The 8" collared opening shall have two beaded sealing rings roll-formed into the top edge. An EPDM (Ethylene Propylene Diene Monomer)compression molded cap model C-126 shall be utilized. All Caps shall include Portals...

Furnish and install the Portals Plus Double Pipe Portal at all points where up to two pipes .375" - 1" in diameter, up to two pipes 1" - 2" in diameter and one pipe 2" - 6" in diameter penetrate the roof.The Pipe Portal shall include an 18 gauge galvanized roof curb model RC-___A with integral base plate, continuously welded corner seams, factory-installed wood nailer, and 1.5" 3lb. rigid fiberglass insulation. The Pipe Portal shall be furnished with a laminated, acrylic coated, ABS plastic...

Large RC-2A Straight Sided Curb for decks with lightweight fill or tapered insulation.

Double Cover Only for *DBL Roof Curbs Pipe Portal Systems  A laminated, acrylic coated, ABS plastic curb cover with pre-punched 8" holes and molded sealing ring. Does not include pips curb caps.

Large RC-3A Canted Curb for non-insulated decks. Roof curbs have an integral base plate, continuously welded corner seams, factory-installed wood nailer, and 1.5" 3 lb. rigid fiberglass insulation. Designed for use with 320 curb cover components.

Zipseal Residential Flashing - 0.375" This is a patented one piece Electrical Mast Flashing closed with stainless steel clips designed specifically for shake or shingle roofing. Nothing to "spin" and no plates to screw on or pipe clamps to tighten. Made out of a durable EPDM rubber, the electrical mast flashing has a life expectancy of 20 years if used within a temperature range of -58 degrees F to 239 degrees F. Galvanized mesh reinforced base is strong and rigid.  ...

Furnish and install the Portals Plus Large Alumi-Flash at all points where one pipe 8" - 12" in diameter penetrates the roof.The Large Alumi-Flash shall include a .060"spun aluminum base unit with a height of 4" and a base diameter of 22". The 14" collared opening shall have two beaded sealing rings roll-formed into the top edge. An EPDM(Ethylene Propylene Diene Monomer) compression molded cap, model C-182 shall be utilized. All Caps shall include Portals Plus'stainless steel Snaplock Clamps....

Large RC-4A Raised Canted Curb for decks with rigid insulation. Roof curbs have an integral base plate, continuously welded corner seams, factory-installed wood nailer, and 1.5" 3 lb. rigid fiberglass insulation. Designed for use with 320 curb cover components.

This unique flashing was designed for residential use with a built in 20 degree pitch allowing adaptability to almost any roof pitch including 45 degrees. The clearly marked designation of pipe diameter takes the guess work out of sizing. A “C20 ASTM” additional requirement was added to ensure conformance to the most stringent ozone/weathering specifications available. This addition allows the rubber a minimum 20 year life. Features: Weather Protection: Gray EPDM Rubber with a C20 ASTM assures...

Furnish and install the Portals Plus Double Pipe Portal at all points where one penetration 2" - 6" in diameter and where up to four pipes .1" - 2" in diameter penetrate the roof. The Pipe Portal shall include an 18 gauge galvanized roof curb model RC-___A with integral base plate, continuously welded corner seams, factory-installed wood nailer, and 1.5" 3lb. rigid fiberglass insulation. The Pipe Portal shall be furnished with a laminated, acrylic coated, ABS plastic curb cover with prepunched...

Furnish and install the Portals Plus Double Pipe Portal at all points where up to four pipes .375" - 1" in diameter and four pipes 1" - 2" in diameter penetrate the roof. The Pipe Portal shall include an 18 gauge galvanized roof curb model RC-___A with integral base plate, continuously welded cor-ner seams, factory-installed wood nailer, and 1.5" 3lb. rigid fiberglass insulation. The Pipe Portal shall be furnished with a laminated, acrylic coated, ABS plastic curb cover with prepunched holes...

This unique flashing was designed for residential use with a built in 20 degree pitch allowing adaptability to almost any roof pitch including 45 degrees. The clearly marked designation of pipe diameter takes the guess work out of sizing. A “C20 ASTM” additional requirement was added to ensure conformance to the most stringent ozone/weathering specifications available. This addition allows the rubber a minimum 20 year life. Features: Weather Protection: Gray EPDM Rubber with a C20 ASTM assures...

The flexible EPDM cap eliminates roof leaks because penetrations can expand, contract, and vibrate independently of the roofing system. Used together with Alumi-Flash or Plasti-Flash Base. The EPDM cap is mechanically sealed to the Alumi-Flash or Plasti-Flash base by a double "Weather-Tite Pressure Seal", which consists of two beads formed into the collar of the base that mate with double grooves molded into the inside of the cap. The Portals Plus Alumi-Flash provides a permanent, watertight,...

Furnish and install the Portals Plus Double Pipe Portal at all points where one penetration 2" - 6" in diameter and where up to four pipes .375" - 1" in diameter penetrate the roof. The Pipe Portal shall include an 18 gauge galvanized roof curb model RC-___A with integral base plate, continuously welded corner seams, factory-installed wood nailer, and 1.5" 3lb. rigid fiberglass insulation. The Pipe Portal shall be furnished with a laminated, acrylic coated, ABS plastic curb cover with...

Furnish and install the Portals Plus Double Pipe Portal at all points where up to six pipes .375" - 1" in diameter and two pipes 1" - 2" in diameter penetrate the roof. The Pipe Portal shall include an 18 gauge galvanized roof curb model RC-___A with integral base plate, continuously welded corner seams, factory-installed wood nailer, and 1.5" 3lb. rigid fiberglass insulation. The Pipe Portal shall be furnished with a laminated, acrylic coated, ABS plastic curb cover with prepunched holes and...

The Universal Retrofit has been designed to accommodate existing applications where standard pull over flashing cannot be installed. The split design allows an easy wrap around fit with a single stainless steel clamp for sealing. Weather Protection: Made of EPDM, this flashing is compounded especially for maximum resistance due to ozone and ultraviolet lightFlexible Base: Easily forms to contours of roof panel5 Minute Installation ...

This unique flashing was designed for residential use with a built in 20 degree pitch allowing adaptability to almost any roof pitch including 45 degrees. The clearly marked designation of pipe diameter takes the guess work out of sizing. A “C20 ASTM” additional requirement was added to ensure conformance to the most stringent ozone/weathering specifications available. This addition allows the rubber a minimum 20 year life. Features: Weather Protection: Gray EPDM Rubber with a C20 ASTM assures...

This unique flashing was designed for residential use with a built in 20 degree pitch allowing adaptability to almost any roof pitch including 45 degrees. The clearly marked designation of pipe diameter takes the guess work out of sizing. A “C20 ASTM” additional requirement was added to ensure conformance to the most stringent ozone/weathering specifications available. This addition allows the rubber a minimum 20 year life. Features: Weather Protection: Black EPDM Rubber with a C20 ASTM...

This unique flashing was designed for residential use with a built in 20 degree pitch allowing adaptability to almost any roof pitch including 45 degrees. The clearly marked designation of pipe diameter takes the guess work out of sizing. A “C20 ASTM” additional requirement was added to ensure conformance to the most stringent ozone/weathering specifications available. This addition allows the rubber a minimum 20 year life. Features: Weather Protection: Black EPDM Rubber with a C20 ASTM...

GoldenSeal Flashing fits pipes up to 3-3/8" we suggest using the factory cutting marks if the roof slope is 27° to 57° (6 on 12 to 18 on 12). For all other slopes a special cut will be required and isntallation by a roofing professional is recommended. The suggestion above is based on product testing with a pipe with 2-3/8" outside diameter extending through an adjustable test roof with plywood decking. Actual results may vary for your particular application. Consult a roofing professional for...

The MARATHON UNI-BOOT offers a permanent, watertight solution for roof system penetrations, requiring no ongoing maintenance. Suitable for all types of roofing systems, it eliminates the need for traditional pitch pans. Constructed from EPDM, with rubber caps and a spun aluminum base, the UNI-BOOT ensures protection from leaks at roof penetrations. Black EPDM cap designed for maximum resistance to weathering, ozone, UV rays, and extreme temperatures (hot and cold).New caps are mechanically...

Portals Plus #29205 WHITE color Plastic Curb COVER, for use with #C-126 Cap.

Used with a roof curb as a flashing system for routing piping and other penetrations through a roof.A laminated, acrylic coated, ABS plastic curb cover with one prepunched hole for a C-182 cap and molded sealing ring on an 14" collared opening. Cover only, cap sold separately.