Price: $7.95
Item #OATEY-11871
Write a review!
Quantity:
Overview
Reduces inventory: 2 multi-size flashings fit 4 pipe sizes.
One flashing accommodates 1-1/2", 2", and 3" pipes; the other, 3" and 4" pipes.
Ring on collar tears off, allowing flashings to seal different pipe diameters.
Simply remove the inner ring at the indicated point on the collar and you'll have a perfect leakproof fit for pipes from 1-1/2" to 4".
Slides over pipe - for pitch to 40 degrees.
Rustproof, stamped galvanized, 24 or 28 gauge.
Non-fading, non-cracking and non-rusting bases and sealing collars.
18" x 18" bases for code required areas.
Rated 180°F continuous heat.
ESM Flashings (only) have collar and base separate to allow for easier installation.
Approved for Type B installations.
Not for hot-mopped or built-up roofs.
Do not use petroleum based products on collars.
How To Use
Make sure roof is clean and free from any major protrusion.
Before roof covering is installed:
No tar, asphalt-based roof cement or "pitch" should be applied to the collar portion of any metallic
No-Calk flashing or the base or collar portion of any Thermoplastic or Flexible No-Calk flashing.
At the discretion of the installer, silicone sealant can be applied over all exposed nails or staples.
Silicone sealant can also be applied to the underside of the base to increase sealing power to the roof
and is recommended in areas where frequent or heavy precipitation is common.
Place correct size No-Calk flashing over vent stack with angle facing down slope of the roof. Push firmly to base
of stack until flashing lies flat on the roof. Flashing size should be equivalent to pipe diameter size (i.e. 1.5"
flashing for 1.5" pipe, 2" flashing for 2" pipe size, etc...). The Oatey logo printed on the flashing represents the
front or down slope side of the flashing.
Using corrosion resistant nails or staples, secure the top of the flashing (the end closes to the crest of the roof) at
teach corner and along the sides at 4"-6" intervals to secure flashing to the roof. One nail or staple in each bottom
corner is appropriate. The top of the flashing will be covered one-quarter to one-half of the way down with
roofing shingles. The bottom edge of the flashing should overlap the shingles beneath it so it shed, not traps,
water.
Oatey Thermoplastic base flashings are designed to fit roof angles from flat to 45 degrees. Flexible, Galvanized,
Aluminum and Copper Base Flashings are designed to fit roof angles from flat to 38 degrees. Oatey All-Flash
High -Rise Thermoplastic Roof Flashings are designed to fit roof angles from flat to 60 degrees.
Reviews (0) • Write a review!
This product has no reviews yet. Write a review!
Oatey, #11930 All-Flash No-Calk Highrise Roof Flashing...
Slides over pipe for pitch 10 to 60 degrees
Price: $12.15
Availability: In Stock
Usually ships within 1-2 Business Days
Oatey® High-Rise® Thermoplastic All-Flash® No-Calk® Roof Flashings feature a patented design that allows use on multiple pipe sizes in commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe. Roof Flashing slides over DWV pipe for pitch to 60 degreesAll-Flash collar has tear-away ring allowing flashing to seal various pipe diametersNon-fading, non-cracking rigid black thermoplastic baseNon-fading sealing collarApproved for Type...
Oatey, #11830 Galvanized Base Roof Flashing 0.5-1.0 in. -...
Shingle Flashings are designed to effectively seal round pipe penetrations, Slides over pipe
Price: $7.05
Availability: In Stock
Usually ships within 1-2 Business Days
Oatey® Galvanized No-Calk® Solar Flashings are designed for commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe. Self-sealing collar slides over pipe and requires no caulking. Oatey products have earned the trust of plumbing professionals for over 100 years. 28 gauge Galvanized steel baseCollar seals pipe ranging from 1/2 In to 1 In to accomodate solar panel mounting system postsRated 180°F continuous heat and approved for...