WUKO Tools

Bends up to 8" of Sheet Metal From 0° to 90° The Wuko Uni Bender 2204 substitutes models 2200 and 2202 and their longer versions. It is the shorter version of model 2354. This is a great do-it-all model from the Wuko Bender lineup. The single set of rollers allows for radius bends (smaller outside radius are possible when compared to inside radius). Its larger size also works very well on straight sections because of its one set of 4 rollers. If acquiring only one set of Wuko Benders, this is...

Wuko Duo Bender 3202 with case The Wuko Duo 3202 bender (formerly 3200) features two bending wheels, specially designed for quick and easy bending of long, straight, sheet metal strips. Its function is equal to that of the Wuko Uni Bender, but it’s equipped with a second pair of bending rolls and a handle. Featuring two sets of rollers, this Wuko bender is ideal for longer straight lines, like gutters or roof panels.  Wuko benders are a must have tool for metal roofers, those bending...

Bends up to approximately 2" of Sheet Metal From 0° to 90° The Wuko Mini Bender 2050, a larger version of the 2020, is made specially for radius inside and outside bends. Because of its small size, it makes it possible to achieve very tight radius. Although intended to bend sheet metal in curves, it also works on straight bends, although not ideally. This is a great tool for sheet metal workers, HVAC workers and metal roofers. It is a must have for the 1/4" bends needed for the Pittsburg lock....

Bends up to 1 1/4" of Sheet Metal From 90° to 180° - Ideal for Hems The Wuko Bender 4040 is an ideal tool to create hems. It features a thin bending wheel, which allows for bends from 90° up to 180°.Another great tool from the Wuko Arsenal.Wuko benders are a must have tools for metal roofers, those bending metal without a brake / box brake and those making radius roof panels and / or triangular shaped panels where one of the standing seams needs to be bent by hand, like in a starter panel.Wuko...

Bends up to 8" of Sheet Metal From 0° to 100° The Wuko Uber Bender 6200 features a thin bending angled wheel, which allows for bends over 90° up to 100°. It also allows for the bender to go over previous bends, such as bending along longitudinal beadings, or panel profile bends. Featuring only one set of rollers, this bender still gives you the ability to do some radius bending, although it is intended for more straight lines. Wuko benders are a must have tools for metal roofers, those bending...

The Wuko Hem Bender 8200 offers the ability of making bends from 0° up to 180°. The only Wuko tool that does both a regular 90° bend like Wuko Duo Benders then a hem as a second step.- Includes carrying case- Another great tool from the Wuko Arsenal.- Wuko benders are a must have tools for metal roofers, those bending metal without a brake / box brake and those making radius roof panels and / or triangular shaped panels where one of the standing seams needs to be bent by hand, like in a...

The Wuko Mini Bender 2020 is made specially for radius inside and outside bends. Because of its small size, it makes it possible to achieve very tight radius. Although intended to bend sheet metal in curves, it also works on straight bends, although not ideally. This is a great tool for sheet metal workers, HVAC workers and metal roofers. It is a must have for doing the 1/4" bends needed for the Pittsburg lock.This tool can be used on most sheet metals. Commonly on copper, zinc, steel,...

Bends up to 7/8" of Sheet Metal From 90° to 180° - Ideal for Hems and Radius bends The Wuko Bender 4010 is an ideal tool to create small hems and radius bends, both inside and outside. It features a thin bending wheel, which allows for bends from 90° up to 180°.Another great tool from the Wuko Arsenal.Wuko benders are a must have tools for metal roofers, those bending metal without a brake / box brake and those making radius roof panels and / or triangular shaped panels where one of the...

Bends up to 1 9/16" of Sheet Metal From 90° to 180° - Ideal for Hems The Wuko Bender 4000 is an ideal tool to create hems in long pieces of metal by featuring 2 discs. No adjustments are needed, creating precise results. The ideal tool to create hems while not damaging finished metals.Another great tool from the Wuko Arsenal.Wuko benders are a must have tools for metal roofers, those bending metal without a brake / box brake and those making radius roof panels and / or triangular shaped panels...

Bends up to 8" of Sheet Metal From 0° to 100° The Wuko Uber Bender Duo 7200 features two bending angled wheels, which allows for bends over 90° up to 100°. It also allows for the bender to be over previous bends, such as bending along longitudinal beadings, or panel profile bends. Unlike the 6200, this bender features two sets of rollers and a handle, making it ideal for longer straight lines.Includes carrying caseAnother great tool from the Wuko Arsenal.Wuko benders are a must have tools for...

This Wuko bender set provides quick and easy bending of straight sheet metal strips. The Wuko 7200/4000 set is the perfect starter kit: Super easy to use and does the trick on any straight panels you work with! The Uber Bender 7200 prevents any damage on delicate, color-coated material plus lets you bend an extra 10 degree on any spring back material. The Disc-O-Bender 4000 gives you maximum stability when making the hem. Just like the 7200, it works super gently on any delicate materials...

WUKO Clipper 1020 C2A - with cordless drive, including battery charger and two batteries FEATURES Runs through sheet metal without vibrations or curlsIdeally suited for straight and curved, short and long sheet metal cuttingAlso for cutting tapered panelsTo be used in the workshop and at siteEquipped with a roller assembly to cut longer metal sheets placed on the floor in an easy and quick wayFor cutting according to marks or - equipped with an adjustable guide (accessory - see below) - for...

The Wuko Uni Bender can be used for bending and forming in sheet metal fabrication Features: The 'longer' brother of the Wuko Uni Bender 2204For bending straight sheets and radius up to 90°.Improved version of the 2200 & 2202 models: narrower, yet still equipped with 4 rollers and more efficient in bending common sheet metal, notably zinc and copper.This model has an increased ability to bend inside radius and easier creation of standing seam profiles (male and female).Adjustable bending...

The WUKO 9050 Bogie Bender is designed to handle sheet metal bending on inside/outside curves, as well as straight pieces. The support plates are able to be unlocked to rotate freely around tight curves while still providing support edges for a crisp bend. WUKO tools are excellent in quality and well known throughout the roofing industry. Key Features: Two swivel joints with three roller stops each give outstanding stability Designed to lean into all kinds of curves - both inner and outer...

The Wuko Duo 3352 bender (former 3350) is a longer version of the Wuko 3202. It features two bending wheels, especially designed for quick and easy bending of long, straight sheet metal strips. Its function is equal to that of the WUKO Uni Bender, but it’s equipped with a second pair of bending rolls and a handle.  FEATURES Featuring two sets of rollers, this an ideal bender for longer straight lines as in gutters or roof panels.Another great tool from the Wuko Arsenal.Wuko benders are a...

Handy tool for quick and clean cutting Cuts up to 26 gauge of sheet metal The Wuko Cutter 1070 is a great tool for quick sheet metal cuts. It features an ergonomic handle. Includes an extension rod, to be easily and quickly attached / removed on demand. Ideal for the workshop as well as for the site for straight and slightly curved cutting. Great for cutting off from coil.Includes carrying caseAnother great tool from the Wuko Arsenal.This tool can be used on most sheet metals. Commonly on...

Forged cutter head and handle: Cutter head and handle are drop-forged as a single unit. This is what makes them so robust and reliable.Induction hardened cutting edges: Extra hard cutting edges guarantee more increased durability and optimal cutting results.Bolted joint: All conventional metal snips can be disassembled for easy sharpening, thus extending their service life!Best used for sheet metal applications: cutting gutters, downspouts, general sheet metal work, HVAC, metal roofing etc....

Forged cutter head and handle: Cutter head and handle are drop-forged as a single unit. This is what makes them so robust and reliable.Induction hardened cutting edges: Extra hard cutting edges guarantee more increased durability and optimal cutting results.Bolted joint: All conventional metal snips can be disassembled for easy sharpening, thus extending their service life!Best used for sheet metal applications: cutting gutters, downspouts, general sheet metal work, HVAC, metal roofing etc....

Features: Easy to hold – Smooth Cutting ActionExtremely compact cutter headThese snips enable more capacity, precision and comfort with easier

Lock and Roller tool is used for closing the single-lock standing seam. FEATURES Close profile in both directionsClever system of eccentric lever with disc springs (patent applied for), adjustments of the pressure if necessary Clean and precise result regardless of materialSimple removal of the tool by relieving pressure at any time without scratching Ergonomic handholds above and on both sides of the toolForming rollers of stainless steel Rope tying device includedCarrying case...

The new WUKO Mini Uber Bender 6050 is a smart handy tool for small radius work. Features: Equipped with an angled bending disc for bending up to 100°Inch scale on the upper shaftTwo roller stops and two support rollersEasily removable handle Adjust the desired bending height with the engraved scale, tighten the wing screw and insert the sheet metal between the bending wheels. The angled bending disc shows in the bending direction. The roller stops should firmly rest against the sheet metal...

With double-curved hickory handle. Secure connection of forged hammer head and steel by wedge bolt Top Features: German Pattern Hammer head coated with black, corrosion resistant powderMade from alloyed PICARD Special-Steel, Carefully Hardened and temperedFace and Cross Peen ground, chamferd edgesSafe Connection Between the head and shaft by patented SecuTec Wedge Bolt Hardened handle protection Dual curved hickory handle DIN 1041 ...

WUKO’s 1080 Trimmer is a self-propelling power tool used for removing old single or double-lock standing seams including clips. This trimmer features a forward & backward run for cutting in both directions, the cutting wheels are protected for a much safer use. Unlike other trimmers WUKO’s 1080 can be inserted to the seam from above, saving you time & increasing productivity. Self-propelling power tool for removing old standing seams Features: For cutting off single or double-lock standing...

The Wuko Mini Uber Bender 6050 is a small tool from WUKO made especially for crispy small radius bends.Its angled bending wheel makes the tool perfect for radius work on springy materials and avoids any scratches on coated sheets.The Wuko Uber Bender 6200 features a thin bending angled wheel, which allows for bends over 90° up to 100°. It also allows for the bender to be over previous bends, such as bending along longitudinal beadings, or panel profile bends. featuring only one set...

Set Includes WUKO Mini Bender 2050 WUKO Disc-O-Bender Twist 4040 Carrying Case Get this for any detail work WUKO Mini Bender 2050 for bending/forming up tp 90 degree: best results for small inner and outer radius WUKO Disc-O-Bender 4040 Twist, Start at 90 degree and bends up tp 180. No free space required at the side for setting the tool on and off Technical Data Weight including case: 6 lbs ...

Features: Comfortable Wood Handle1 5/8" Head DiameterHard Plastic Soft-face EndsEasily interchangeable nylon headsGentle on the joints and low in noiseVery wear-resistantNo chippingMade for very high impactVery secure shaft-head connection thanks to aluminum wedge and locking pinDouble curly hickory handle

WUKO Bender Set 6200/4040 Wuko bender set to bend sheet metal up to 100° and make hems The Wuko Uber Bender 6200 features a thin bending angled wheel, which allows for bends over 90° up to 100°. It also allows for the bender to be over previous bends, such as bending along longitudinal beadings, or panel profile bends. Featuring only one set of rollers, this bender still gives you the ability to do some radius bending, although it is really intended for more straight lines. The Wuko...

The Picard Wedged Hammer is a must have for copper work and it works great on seams.Features: Light weight but strongAll-purpose metal working hammerOne-sided wedge-Shaped Made of special plastic material High resistance to stress cracking Can be re-sharpened Head and handle with ring wedge fixtureDual curved ash handle ...

The Wuko Mini Bender 2050, a larger version of the 2020, is made specially for radius inside and outside bends. Because of its small size, it makes it possible to achieve very tight radius. Although intended to bend sheet metal in curves, it also works on straight bends, although not ideally.The Wuko Uni Bender 2204  substitutes models 2200 and 2202 and their longer versions. It is the shorter version of Model 2354.This is a great do-it-all model. The single set of rollers allows for...

WUKO Disc-O-Bender Maxi Twist 4041 Features: For bending sheet metal legs from 90 degree up to 180 degree No free space required at the side for setting the tool on and off Just twist the roller stop by means of the locking bolt, place the tool on the right angle bend, twist the roller stop and start bending The bigger bending disc enlarges the bending height

Bends up to 14" of Sheet Metal From 0° to 100° The Wuko Uber Bender 6350 is thE longer version of the 6200. It features a thin bending angled wheel, which allows for bends over 90° up to 100°. It also allows for the bender to be over previous bends, such as bending along longitudinal beadings, or panel profile bends. featuring only one set of rollers, this bender still gives you the ability to do some radius bending, although it is really intended for more straight lines.Another great tool...

Compound-action snips have 2 pivot points and are spring loaded to lessen user fatigue. FEATURES Material: Alloy steel, Overall Length: 10"Features: High Grade Steel Cutting BladesHrc Up to 64. Optimized Leverage Ration - 25% Less Effort. Compact Cutter Head.

Compound-action snips have 2 pivot points and are spring loaded to lessen user fatigue. FEATURES Material: Alloy steel, Overall Length: 10"Features: High Grade Steel Cutting BladesHrc Up to 64. Optimized Leverage Ration - 25% Less Effort. Compact Cutter Head.

Bends sheet metal and make hems The Wuko Mini Bender 2020 is made specially for radius inside and outside bends. Because of its small size, it makes it possible to achieve very tight radius. Although intended to bend sheet metal in curves, it also works on straight bends, although not ideally.The Wuko Bender 4010 is an ideal tool to create small hems and radius bends, both inside and outside. It features a thin bending wheel, which allows for bends from 90° up to 180°.This is a great...

Bends up to 1/2" of Sheet Metal From 90° to 180° - Ideal for Hems The Wuko Bender 4050 is an ideal tool to create small hems of 0.5" in height. in log pieces of metal by featuring 2 discs. No adjustments are needed, creating precise results. The ideal tool to create hems while not damaging finished metals.Another great tool from the Wuko Arsenal.Wuko benders are a must have tools for metal roofers, those bending metal without a brake / box brake and those making radius roof panels and / or...

WUKO Bender Set 6050/4040 Set Includes WUKO Uber Mini Bender 6050 WUKO Mini Disc-O-Bender 4040 Carrying Case The best of the best for any detail and radius work WUKO Mini Bender 2050 for bending/forming up to 100 degree: Best results for small inner and outer radius! The angled bending disc prevents any damages on delicate, color-coated material. WUKO Disc-O-Bender 4040 Twist, starts at 90 degrees - 100 degrees and bends up tp 180 degrees: No free space required at the side for setting the...

WUKO Bender Set 2204/3202 Looking for tools to bend a standing seam profile and various other 90 degrees bends? The 2204/3302 Kit is ideal for both radius and straight panels. The Wuko Uni Bender 2204 substitutes models 2200 and 2202 and their longer versions. It is the shorter version of Model 2354.This is a great do-it-all model. The single set of rollers allows for radius bends (smaller outside radius are possible when compared to inside radius).Its larger size also works very well on...

Features: Comfortable Wood Handle1 3/8" Head DiameterEasily interchangeable nylon headsGentle on the joints and low in noiseVery wear-resistantNo chippingFor very high impactVery secure shaft-head connection thanks to aluminum wedge and locking pinDouble curly hickory handleHard Plastic Soft-face Ends

Compound-action snips have 2 pivot points and are spring loaded to lessen user fatigue. FEATURES Material: Alloy steel, Overall Length: 10"Features: High Grade Steel Cutting BladesHrc Up to 64. Optimized Leverage Ration - 25% Less Effort. Compact Cutter Head.

Mini compound leverage shape for tight cuts! Extremely compact cutting head : The design of the uniquely compact design head offers one tremendous maneuverability, the ability to cut the narrowest radii and the ability to reach some of the most difficult to access spots.Practicable combination of bar and arrester: A practical locking mechanism allows one to open and close with one hand and limits the maximum opening of the snip. Compound leverage, Compound leverage considerably reduces...

One round face, one horizontal face, finely polishedFor Sheet Metal Mechanics, Plumbers and Roofers PICARD planishing and grooving hammer with one round and slightly arched polished face and one polished cross peen. Features: Grey hammer effect enamel Made from alloyed PICARD special - steel, carefully hardened and tempered Head and handle with ring wedge fixture Ash handle Channels different intensity and differently arched One Round Face One Horizontal Face Finely Polished Steel ...

Traditional European Tin snips: Best for circular cuts and semi-circular edges. High quality steel, painted handles. Features: For short, straight and curved cuts (Perfect for a small radius)Very slick cutting headAvailable in right or left cutting versionsD214 Painted handlesD114 PVC dipped handles ...

WUKO Bender Set 7350/4000Kit to bend sheet metal up to 100° and make hems The Wuko Uber Bender Duo 7350 is a longer version of the Wuko 7200. It features two bending angled wheels, which allows for bends over 90° up to 100°. It also allows for the bender to be over previous bends, such as bending along longitudinal beadings, or panel profile bends. Unlike the 6350, this bender features two sets of rollers and a handle, making it ideal for longer straight lines.The Wuko Bender 4000 is an...

WUKO’s 1250 Rotary Sheet Metal Shear features an in-feed support plate made of stainless steel. The Shear comes with an adjustable stop, helps leave a perfect cut every time. Two carrying handles makes it easy to transport to & from the job site. Options:Slides Right to Left - 1005321Slides Left to Right - 1016807Features Max. sheet metal thickness: Galvanized steel: 0.8 mm/0.031″Aluminium, copper, zinc: 1.0 mm/0.039″Stainless steel: 0.6 mm/0.024"Perfect cut every timeVery low weightWeight: 35...

Traditional European Tin snips: Best for circular cuts and semi-circular edges. High quality steel, painted handles. Features: For short, straight and curved cuts(Perfect for a small radius)Very slick cutting headAvailable in right or left cutting versionsD214 Painted handlesD114 PVC dipped handles ...

Wuko Sheet Metal Bender Set  The Wuko Duo 3202 Bender (former 3200) features two bending wheels, specially designed for quick and easy bending of long, straight, sheet metal strips. Its function is equal to that of the WUKO Uni Bender, but it’s equipped with a second pair of bending rolls and a handle. It features two sets of rollers, making it an ideal bender for longer straight lines, like gutters or roof panels. The Wuko Bender 4000 is an ideal tool to create hems in long...

Special High Quality Steel Snips No slipping even without serrations Optimised leverage ratio: 25% less effort ERGO-handle for increased comfort reduced hand fatigue!Features: Mini Shape & Straight Cutting Snips All the power of full size aviation snips but 25 % smaller the best for small cutting areas High-quality steelRight Cut ...

Features: Comfortable Wood Handle 2" Head Diameter Hard Plastic Soft-face Ends Easily interchangeable nylon heads Gentle on the joints and low in noise Very wear-resistant No chipping Made for very high impact Very secure shaft-head connection thanks to aluminum wedge and locking pin Double curly hickory handle