WUKO 2050/4040 - Bender Set , 1005628

The new WUKO Mini Uber Bender 6050 is a smart handy tool for small radius work. Features: Equipped with an angled bending disc for bending up to 100°Inch scale on the upper shaftTwo roller stops and two support rollersEasily removable handle Adjust the desired bending height with the engraved scale, tighten the wing screw and insert the sheet metal between the bending wheels. The angled bending disc shows in the bending direction. The roller stops should firmly rest against the sheet metal...

The Wuko Mini Bender 2020 is made specially for radius inside and outside bends. Because of its small size, it makes it possible to achieve very tight radius. Although intended to bend sheet metal in curves, it also works on straight bends, although not ideally. This is a great tool for sheet metal workers, HVAC workers and metal roofers. It is a must have for doing the 1/4" bends needed for the Pittsburg lock.This tool can be used on most sheet metals. Commonly on copper, zinc, steel,...

Bends up to approximately 2" of Sheet Metal From 0° to 90° The Wuko Mini Bender 2050, a larger version of the 2020, is made specially for radius inside and outside bends. Because of its small size, it makes it possible to achieve very tight radius. Although intended to bend sheet metal in curves, it also works on straight bends, although not ideally. This is a great tool for sheet metal workers, HVAC workers and metal roofers. It is a must have for the 1/4" bends needed for the Pittsburg lock....

Bends up to 1 1/4" of Sheet Metal From 90° to 180° - Ideal for Hems The Wuko Bender 4040 is an ideal tool to create hems. It features a thin bending wheel, which allows for bends from 90° up to 180°.Another great tool from the Wuko Arsenal.Wuko benders are a must have tools for metal roofers, those bending metal without a brake / box brake and those making radius roof panels and / or triangular shaped panels where one of the standing seams needs to be bent by hand, like in a starter panel.Wuko...