The WUKO 9050 Bogie Bender is designed to handle sheet metal bending on inside/outside curves, as well as straight pieces. The support plates are able to be unlocked to rotate freely around tight curves while still providing support edges for a crisp bend. WUKO tools are excellent in quality and well known throughout the roofing industry.
Key Features:
- Two swivel joints with three roller stops each give outstanding stability
- Designed to lean into all kinds of curves - both inner and outer
- Joints easily locked for perfect handling on straight pieces
- Angled bending wheel for getting springy materials to true 90* or avoiding scratches on coated sheets
- The max bending depth of the 9050 is 2″
- Min. bending height: 5 mm/0.2”
- Max. bending height: 50 mm or 2”
- Bending capacity: 0.80 mm/0.031” (for all common materials)
Experts will benefit from the WUKO Bogie Bender’s versatility.
Straight Panels:
The Wuko 9050's two swivel joints with three roller stops (you see where it gets its stability from) can be fastened within seconds due to two integrated locking pins. Two simple steps and you are all set: Bend away!
Switch back to curvy mode:
Unfasten the two locking pins by pulling out the black knobs and rotate both swivel joints through 30 degrees before locking the knobs back in place again. This setting allows the roller stops to follow the curves of the edge smoothly. The outstanding dimensional accuracy of the bend puts this tool ahead of its competition, especially on workpieces combining inner and outer radius.
Rounding off the package, the WUKO Bogie Bender features an angled bending wheel that comes in handy for getting springy materials to true 90°, or avoiding scratches on coated sheets.