Fall Protection

This D-ring anchor is 5K rated and can be bolted or welded on. This anchor is a single point anchorage for steel applications. The design allows for free moving movement of D-ring after installation.FEATURES Designed for free movingMinimum tensile strength 5,000 lbsZinc plated steel D-ringForged steel plateOverall Dimensions .25″ x 2.00″ x 4.50″Bolt on free moving D-ring anchor for steel applications Materials: Zinc plated steel D-ring; Forged steel plateWeight :1.20 lbs (0.54 kg)Weight...

The new Velocity SRL series from Guardian Fall Protection includes models with lengths ranging from 10’ - 100’, and is manufactured with heavy-duty galvanized cable. Velocity SRLs feature swivel tops and swivel snap hooks, as well as lightweight and durable glass-filled nylon housing.Features:-Carabiner included-Numerous cable lengths available-Compact and lightweight designApplicable Standards: ANSI Z359.14-14, ANSI A10.32-12, OSHA 1926 Subpart M, OSHA 1910Worker Capacity Range: 130-310...

The Malta Dynamics A6300 - Roof Anchor 12" Standard is a fixed post roof anchor, intended for permanent applications only. The A6300 has been thoroughly tested and is compatible for installation on steel and concrete substrates (fasteners sold separately). Meets the requirements for anchors rated for window cleaning. The 12-inch anchor post functions to extend though roofing materials so that it is accessible both during and after roof construction. The A6300 roof anchor is composed of durable...

Workers on the Roof Cannot Use Their Air Guns Without Being Tied-Off to Their Vertical MAX X-Line The X-Line is a personal fall arrest lifeline with a patented, integral 1/4" air hose inside SAS's 12-Strand HD Lifeline. The result is a completely integrated system for roofers that reduces rope management issues and tripping hazards. Less rope management means faster roofing, too. Ideal for construction trades using air guns. This is a safety tool for the professional roofer that is looking for...

5 Point Adjustment, Pass Thru Chest Buckle, Tongue Buckle Leg Straps Adjustable dorsal D-Ring Shoulder Pads / Harness Stretches in Shoulder and Back Friction pass-thru buckles, just lift the release tab to loosen Impact load indicator Cradle seat Quick adjusting torso buckles, two lanyard keepers

This is a single sided D-ring anchorage device that are installed at the ridge, hip-ridge or in the field for permanent or temporary use. Permanent use anchors are supplied with stainless steel nail fasteners and a butyl strip flashing. The 8-1/2” length is idea for shingle type roofs allowing the anchor to be attached over the roofing material. The RS-10 is exactly ½ of our RetroFit anchor, making it an ideal complimentary anchor for hip ridges and shed roofs. Available with a “Dual Hole”...

TEMPORARY SKYLIGHT PROTECTION The SkyNet™ is an easy-to-use, reusable, cost-effective solution for skylight fall protection. It’s user friendliness is attributed to it’s simple yet highly effective design. Simply lay a SkyNet™ over a curbed skylight or secured over an opening in the roof surface and you’re protected from falling through to the level below. WE ARE YOUR SECURITY NET In just a few minutes, you can set up this fall protection product. The result? Unparalleled peace of mind. In the...

The Guardian Fall Protection Cross Arm Strap is a reusable anchorage connector that can be used in a variety of fall protection applications. To use, loop over a steel support beam or other compatible anchor, and pull the small D-ring through the pass-through loop (or second, larger D-ring). Connect to the Cross Arm Strap D-ring with a compatible lanyard or SRL, and you are ready to work. Features: For use, strap loops around steel support beam or other compatible anchor and small D-ring...

The EcoAnchor was developed in direct partnership with CHECKMATE, an industry leading fall protection manufacturer in the UK, now part of the Pure Safety Group family of companies effective June 2018. Guardian is excited to offer the innovative EcoAnchor, a water filled neoprene counterweight fall arrest anchor system. This anchor has been tested and approved on a wide variety of low slope roofs, weighs less than 17 pounds when empty, and comes with a specialized carrying case for stowing. It...

FallTech's Ringed Plate Anchor provides a temporary safety solution for workers performing work on building exteriors and roofs. Installed over a truss on the field of wood frame structures, the Ringed Plate Anchor serves as a single user point for personal fall arrest and restraint systems. The fallTech Ringed Plate Anchor is ideal for use during tasks such as painting, siding, roofing, window cleaning, or general construction Features: Temporary fall protection for residential and light...

The Guardian Fall Protection Ridge-It Anchor line is designed for use on wood rooftops. This Ridge-It model RIDG-1 is manufactured with a D-ring on one end and is 9—3/4" long, while the RIDG-2 is manufactured with 2 D-ring ends, and is 18" long. Ridge-It Anchors are composed highly durable stainless steel and zinc-plated steel, and are compliant with all applicable OSHA regulations. Ridge-It Anchors are easy to install, and are ideal for both residential construction and maintenance...

FallTech connectors are tested to comply with current ANSI standards and built for a wide range of workplaces. FallTech has worked hard to make sure that when you need to be connected, you have the right equipment for the job. Features: Trailing mobility follows ascending and descending user with minimal effortEnergy absorber features patented ViewPack® cover with inspection window.For use with 5/8" diameter synthetic rope lifelinesIncludes alloy steel rope adjuster for lifeline connection and...

Malta Dynamics 6’ Single Leg Internal Shock Absorbing Lanyard with 2 Steel Snap Hooks meets all the stringent ANSI Z359.13-2009 regulations and is 100% ISO 17025 third party tested (per the ANSI testing protocols). The internal shock absorbing lanyard limits average arresting force to 900 pounds or less. It is comprised of 1 inch polyester webbing and two (2) 3600 ANSI tested steel snap hooks. The shock absorption is built directly into the lanyard making the internal shock lanyard a...

Why Standing Seam Roofs Are Different All types of structures use standing seam roofs, from commercial and residential buildings to industrial complexes. When you work on a standing seam roof, it’s not the same as working on other types of roofs. You’ll need to approach anchorage differently than other types of roofing. Working on a slanted roof requires careful concentration because it may be easier to fall. You also need to use a different type of anchor than for wood and concrete. The...

This extension pack is for the RACE Rail Skylight Safety Kit. It allows the RACE Rail to fit skylights up to 4' x 8', giving you the power to increase your range of protection. It is easily adjustable, lightweight and made with durable steel, so it can keep the user safe and secure. It comes with a bundle of 4 extensions and 4 L-bolts. Features: Extends Basic RACE Rail Skylight Safety KitWorks on skylights up to 4' x 8'Bundle of 4 Extensions 4 L-BoltsAdjustable Lightweight Durable...

The Guardian Fall Protection "Cyclone HUV Harness" is an ideal combination for fall arrest, work positioning, rescue and rope access applications. This harness was designed with a unique X-back which leaves the harness straps tangle free as well as a specially cushioned mesh net for better shock absorption. Combination buckles on the shoulder and leg straps make this harness very adjustable. It also features web keepers on the shoulder straps for easy placement of lanyards. The harness also...

Single-Use roof anchor with nails features user fold-bend to fit roof peaks. Single-use temporary anchor can be removed or hammered down.  Features 6" x 1-1/2" bend-in-place nailing plates with 3/4" connecting eyeIncludes 16D nails for roof ridge installation.For temporary use on wood structuresMeets OSHA 1926.502 regulations

The Cyclone Harness offers superior comfort, styling, and safety. Our design engineers took the basics of what makes a harness effective and safe, and made holistic improvements to allow workers to do their jobs more comfortably and with added versatility, all without breaking the bank. They Cyclone features ultra-flow padding that helps keep moisture away from the body, and the double-grommeted tool belt provides the ultimate in support. A variety of buckle configurations are also available....

The Non-Shock absorbing lanyards are available in a variety of lengths, from 2 to 6 feet. With connector options including, Snaphooks and Rebar hooks. These lanyards are for use in a work positioning and restraint applications only (Because they do not include a shock absorbing component) They are composed of durable nylon and allow workers to attach to an anchorage point or system with enough length to safely complete the job. Features Lightweight and DurableFacilitates 100%...

The Malta Dynamics Tool Lanyard features a lightweight, aluminum alloy screw lock mini carabiner for attachment to your harness or tool belt. This retractable tool lanyard extends all the way out to 53” and sits in a relaxed position at 32”. Tool lanyards for hand tools are handy devices that workers use to attach tools to themselves while working at heights. Tool safety lanyards and tethering accessories help ensure, if your tool does happen to fall, it won’t reach the ground or hit someone...

The Guardian Fall Protection Cross Arm Strap is a reusable anchorage connector that can be used in a variety of fall protection applications. To use, loop over a steel support beam or other compatible anchor, and pull the small D-ring through the pass-through loop (or second, larger D-ring). Connect to the Cross Arm Strap D-ring with a compatible lanyard or SRL, and you are ready to work.Feature: Easy to installPass-through D-ring and loop modelsLightweight and durableMultiple lengths...

FallTech connectors are tested to comply with current ANSI standards and built for a wide range of workplaces. FallTech has worked hard to make sure that when you need to be connected, you have the right equipment for the job. Features: Low-profile design constructed with tubular polyester webbingFeatures full-length internal energy absorber and visual fall indicator limits fall forces to 900 lbs or less.Includes alloy steel snap hooks for harness attachment and anchorage connectionsComplies...

The FallTech 727650LE SRD is designed to provide the highest level of safety when working around unprotected sides and edges including leading edges. Tested to the most rigorous global standards the FallTech 727650LE is third party certified as compliant with the leading edge test requirement of ANSI Z359.14-12 Features: 7/32" galvanized steel cable lifeline with load-indicating swivel snap hookInternal inertial braking system provides positive stopping action and uniform deceleration.Integrate...

The Guardian Fall Protection Poly Steel Rope is ideal for high-moisture environments. Nylon rope, when wet, will typically reduce in strength by between 10% to 15%, but unlike Nylon, Poly Steel Rope does not absorb water, so will not diminish in strength in wet conditions. This rope is also particularly strong when it comes to resisting damage from ultraviolet light, and its synthetic composition makes it especially resistant to cuts and abrasion, thereby increasing equipment lifetime. Poly...

The 30° angle fixed length, factory engineered Horizontal Lifeline System is for use by 3 workers in fall restraint or 2 in fall arrest. This system is available in a 20’ kit with or without a carry bag. This 3rd party engineered horizontal line kit is a cost-effective way to have multiple workers on the roof with room to move freely. Engineering standards specify that a horizontal lifeline without an energy absorbing device subjected to fall hazards must have a 30° anchors between anchorage...

The Guardian Fall Protection Rapid Deployment Rescue Ladder is specially designed to facilitate the rescue of fallen workers at significant heights, and is thus particularly applicable for the wind energy industry. This durable ladder system is manufactured with unique ladder standoffs to make footholds easier and self-rescue more likely. It is also capable of supporting up to 2 worker at once (maximum 310 pounds each, including all equipment), thereby allowing a rescuer to climb down to...

Fall Arrest rating for three workers and Fall Restraint for two. For Concrete applications, only 3 Workers for Fall Arrest and 2 for Fall Restraint. With the new job box and material rack, you will see safe and productive increases for your leading edge work. Includes Flat-Free Tires, 20 cf. Job Box (w/double door opening from the center) and a Material Rack. Additional 10 cf. job box and Raptor Alert available as an option. The TriRex was redesigned in 2011 from the ground up, based on...

The Cyclone Harness offers superior comfort, styling, and safety. Our design engineers took the basics of what makes a harness effective and safe, and made holistic improvements to allow workers to do their jobs more comfortably and with added versatility, all without breaking the bank. They Cyclone features ultra-flow padding that helps keep moisture away from the body, and the double-grommeted tool belt provides the ultimate in support. A variety of buckle configurations are also available....

Tie-Off Straps are made from 2” wide polyester or nylon and are designed for use as temporary anchorage points to connect vertical lifelines, SRL’s, web lanyard and rope lanyards. Use on wood, steel and concrete structures. Tie-Off straps are wrapped, cinched around the structure to make for a secure anchor or can be embedded into concrete and evacuated when finished with the job. Please see the part number list below for Application, Length, Compliance and Packaging information for all our...

The Guardian CB Anchor Point Install Screws comes in a bag of 40 and are used to install CB12 and CB18 anchorage connectors. These screws come in two different options: one for wood, and one for metal. Bag of 40 screwsWood and metal deck screws available#14-10 x 2" galvanized screws for wood

The Guardian Fall Protection 15500“C-Slab Grabber” is an ideal solution for installing guardrails during concrete decking operations. With the C-Slab Grabber’s new backup safety cable (that keeps the systems from separating), quick adjust handle, and anti-slip tape, this product easily meets or exceeds OSHA’s safety standards. This product is fast and easy to set up and adjusts up to a 36-inch slab. The rails that can be used with this product include: 2 X 4’s, 2 X 6’s, or cable. With its...

Designed for production builders who want a robust anchor point during the framing and construction of the home but do not want to leave anything permanently attached to the structure. The decking is installed over the top of the anchor but the tie off straps stay exposed to the outside protecting all trades from fall hazards. It can also be utilized in a similar fashion to the Safety Bar. Here is how it works: Install the Truss Bar onto truss at predetermined locationsUse for fall protection...

TEMPORARY SKYLIGHT PROTECTION The SkyNet™ is an easy-to-use, reusable, cost-effective solution for skylight fall protection. It’s user friendliness is attributed to it’s simple yet highly effective design. Simply lay a SkyNet™ over a curbed skylight or secured over an opening in the roof surface and you’re protected from falling through to the level below. WE ARE YOUR SECURITY NET In just a few minutes, you can set up this fall protection product. The result? Unparalleled peace of mind. In the...

The Guardian Fall Protection 2-Rung Ladder Jack is MIG welded and possesses a riveted construction for superior strength and durability. It is set-up over 2 consecutive ladder rungs, can be used on either side of a ladder, and is ideal for painting, siding, and repair applications. This jack is easy to both install and remove, and will even accommodate planking up to 18 inches wide when used in combination with a paired Ladder Jack, and installed and used in accordance with all applicable OSHA...

The Parapet Roof Anchor by Tie Down Engineering provides a parapet wall fall protection anchor for work on lower-level surfaces. This parapet clamp works with retractable lanyards, vertical lifelines, and shock absorbing lanyards. Designed the Parapet Roof Anchor as the “go to” solution when roof penetration is not an option, these parapet wall roof anchors for fall protection feature a large easy-to-grip adjustment handle for quick set-up and proper securement. Tie Down Engineering maintains...

The FallTech 727630LE SRD is designed to provide the highest level of safety when working around unprotected sides and edges including leading edges. Tested to the most rigorous global standards the FallTech 727630LE is third party certified as compliant with the leading edge test requirement of ANSI Z359.14-12 Features: 7/32" galvanized steel cable lifeline with load-indicating swivel snap hookInternal inertial braking system provides positive stopping action and uniform deceleration.Integrate...

The Standing Seam Roof Anchor(SSRA1) is a revolutionary product allowing homeowners, building owners, and contractors to work safely on standing seam roofs without penetrating the panels. Engineered to revolutionize fall protection anchorage attachment on Standing Seam Roofs! The patented, non-penetrating design of this life-saving device is unlike anything currently available. It consists of a solid 6061-T6 aluminum body with 12 stainless steel set screws and 12 nylon tipped stainless steel...

The Guardian Fall Protection Rope Grab is easy to install and is designed to lock automatically in the event of a fall. Rope Grabs are available in a variety of configurations, are compatible with 5/8" safety ropes, and are supremely durable.Removable rope grabs are easy to installFits 5/8" safety ropesLock automatically when a fall occursApplicable Standards: OSHA 1926 Subpart M and OSHA 1910Worker Capacity Range: 130-310 lbs.Material: Galvanized steelMin. Breaking...

18" D-ring Extender with Choking Loop Features Web with Choking Loop and D-ring Choking loop attachment to the dorsal D-ring on the full body harness reduces the user's reach needed for connection of the energy absorbing lanyard Features: 1in. Polyester webbing has tensile strength of 9,800 lbs.Web loop at the attachment endD-ring at the trailing endProvides improved over-the-shoulder reach for ease of connecting lanyards and SRLsBuilt with rugged polyester webbing and alloy steel...

Our Deluxe Lifeline is made from 12 strand polyolefin cord that is rated for 11,600 pounds. The braided design does not twist or bind making for an easy-to-use, long lasting lifeline. We use an aluminum swage at the anchor end of the lifeline that is rated for over 5,000 pounds. Each lifeline has its own label package and serial number. Numerous lengths and options available.Features Rated for 11,600 lbs.Works with all Super Anchor Rope Grabs12 Strand Design for Long Life CycleResists UV and...

The Malta Dynamics Multi-Directional Roof Anchor supports one worker in fall arrest or two workers in fall restraint. The four directional connection points increase the working range (when detaching and reattaching to connection points). Workers can maintain both fall arrest or fall restraint.Metal Roof Installation: The minimum material thickness for steel decking is 22 gauage. Use twenty (20) #14-10, 2” hex-head self-drilling metal screws Wood Sheathing Roof Installation: The minimum...

The Malta Dynamics Tower Hook Carabiner is a larger version of the High Strength Steel Locking Carabiner. It is designed to be durable and easy to use. The wider gate allows for increased versatility. With the Tower Hook Carabiner you can attach one component to another and maintain maximum strength and durability.

Features:  For temporary use in existing openings during construction stages where doors and windows are not yet installedNo tools required with simple clamp-in non-penetrating, non-marring installation.Features telescoping adjustment for openings from 21" to 51" wideLight weight extruded aluminum construction with durable steel clamping feetMeets OSHA 1926.502 regulations ...

The 18-Inch D-Ring Extender features single-leg construction and utilizes 1-inch polyester webbing for resistance to UV light and abrasion. The webbing also has a tensile strength of 9,800 pounds, and features embedded wear-indicating threads. It also features double-locking snap hooks at the attachment and anchorage ends. The StayPut buckle allows the length to be adjusted from 4-1/2-to-6-feet to eliminate unnecessary free-fall. The end terminations feature wear pads for additional safety and...

The Guardian Fall Protection Diablo Big Block Cable SRL, formerly the Daytona Big Block SRL, is available in both 50' and 65' models, as well as with a variety of connector options. Rated for use in Leading Edge (LE) applications, the entire Diablo Big Block is built with quality and care, from its special coated and heat treated brake pawl bolts, to its lightweight and heavy duty housing. From functionality, to durability, to affordability, the Diablo Big Block is truly one of the...

Weld-on D-Ring Anchor with Unplated Installation Plate Features: Forged D-ringPlain/Uncoated Steel Plate for Weld-on or Bolt-on ApplicationsCan be installed wherever weld-on applications are preferredProvides Simple Overhead Anchorage SolutionFor use on steel I-beams, columns and other steel structuresHeavy-duty steel construction2" x 4-1/2 plate with 1/2" holes Anchorage Location:  Select a suitable anchorage point that will support the strength requirement and minimize free fall and...

The All-In-One railing base is the last base you will ever need to buy. You can install it on flat/low edges, over gravel stops, on parapet walls, and even on concrete slab overhangs. The standard version includes posts that accept RaptorRail metal rails. A wood option is available that comes fitted with brackets that can accept lumber rails or RaptorRail metal rails (metals rails still included with wood option)(Lumber is not included with wood option)(Standard version does NOT accept lumber...

The GuardDog Self-Closing Gate is tough, durable and easy to install. Featuring a unique self-closing design with two stainless steel torsion springs, the GuardDog industrial safety gate can open in any direction. To meet diverse application requirements, the safety gate is available in 5 nominal sizes and is adjustable laterally to 6” (-3 to +3 of the nominal size). The GuardDog Self-Closing Gate arm is dimensioned to match top- and mid-rail heights of an OSHA-compliant guardrail. When the...