FallTech 8366 - Dorsal D-ring Extender w/ Steel Snap Hook, 18"

The 18-Inch D-Ring Extender features single-leg construction and utilizes 1-inch polyester webbing for resistance to UV light and abrasion. The webbing also has a tensile strength of 9,800 pounds, and features embedded wear-indicating threads. It also features double-locking snap hooks at the attachment and anchorage ends. The StayPut buckle allows the length to be adjusted from 4-1/2-to-6-feet to eliminate unnecessary free-fall. The end terminations feature wear pads for additional safety and long life, while both ends feature a steel thimble for extra resistance to wear. Restraint Lanyards are intended to be used on platforms, in buckets and other areas to prevent the possibility of a fall. Different lengths and types are available to restrict leading edge access. Restraint lanyards can be attached to the back D-Ring on a full body harness or restraint belt. Meets or exceeds applicable OSHA and ANSI standards.

Features:

• Single-leg construction
• 1-Inch webbing has a tensile strength of 9,800 pounds
• Webbing features embedded wear-indicating threads
• Both ends feature a steel thimble for extra resistance to wear
• Meets the requirements of ANSI Z359.1-2007, Z359.3-2007 and OSHA 1926
• Provides improved over-the-shoulder reach for ease of connecting lanyards and SRLs
• Built with rugged polyester webbing and alloy steel D-ring.
• Includes alloy steel snap hook for harness attachment
• Extender use will increase the user's total fall clearance distance when using an energy absorbing lanyard

• Webbing - Polyester; 5,000 lb min. static strength
• D-ring - Plated alloy steel; 5,000 lb min. static strength
• Connector - Plated alloy steel; 5,000 lb min. static strength with 3,600 lb gate strength
  
• Static Strength - 5,000 lb min.
• ANSI User Capacity - 130 to 310 lb max.
• OSHA User Capacity - 130 to 425 lb max.