Roof Tube

The Roof Tube - Classic 1/2, Threaded for TipsMastics have always been applied using rollers, brushes, caulk guns, and trowels. The Roof Tube allows you to get all of your seaming jobs done faster than any of these methods. The Roof Tube is a heavy-duty plastic pipe featuring suction technology to help fill the tube effortlessly with roof cement or any waterproofing roof mastic materials such as acrylic, urethane, butyl, silicone, and more. The material can be pumped out by applying pressure...

Bundle Includes: (2) Roof Tube Classics, 1/2 Gallon. Threaded (1) .25" Fastener Grade Tip (1) .47" Fastener Grade Tip (1) .625" Fastener Grade Tip (1) 1.00" Seam Sealing Tip (1) 1.5" Seam Sealing Tip (1) 1.9" Large Mouth Seam Sealer Tip (1) Trident

Recommend after using 0.625" tip and it feels a little messy, or runny. This will help constrict that loose material a small amount delivering a more consistent "dollop" every time with less material wasted. Often used during the heat of the day when material heats up and becomes looser. As always take the tip out to draw material then twist the tip back in 4 or 5 revolutions (No need to over tighten).

Bundle Includes: (6) Roof Tube Classics, 1/2 Gallon, Threaded (2) .25" Fastener Grade Tips (2) .47" Fastener Grade Tips (2) .625" Fastener Grade Tips (2) 1.00" Seam Sealing Tips (2) 1.5" Seam Sealing Tips (2) 1.9" Large Mouth Seam Sealer Tips (1) Trident Tip

Great for butter grades, Fastener grade mastics. Often the second choice for sealing fasteners if the .47 tip feels to slow or having to push too hard. Take the tip out to draw the material, screw it back in (4-5 turns) and you are ready to seal some leaky fasteners. If the material you are using feels too messy with this tip, consider trying the smaller .47" tip. If the material feels too slow coming out of this tip, try out 1.0" Seam sealer tip (yes even if you are still trying to seal...

This tip is used for seam grade mastics on seams for metal, single ply's, and Mod Bit. This will leave about a 1.0" -1.5" strip on your roof.

The Roof Tube - Mini with Shut-Off Valve, 1/4 Gallon (Threaded for Tips) Mastics have always been applied using rollers, brushes, caulk guns, and trowels. The Roof Tube allows you to get all of your seaming jobs done faster than any of these methods. The Roof Tube is a heavy-duty plastic pipe featuring suction technology to help fill the tube effortlessly with roof cement or any waterproofing roof mastic materials such as acrylic, urethane, butyl, silicone, and more. The material can be...

This unusual tip is for spreading top coat. Nail your coverage rates and Millage every time. Evenly dispense your material with this five fingered tip... This tip will surprise you how much easier It is then the traditional Dump and slop method out of a 5 gallon bucket... A perfectly full tube will hold a half gallon of material so with this you can grid out your roof use 4 tubes per square (for 2 gallons per square coverage). ...

With an I.D. of .25" this is our thinnest tip yet. Designed to be used with Rust primers, Top and Base Coats. Butter/ Seam/ or trowel grades will be too thick for this tip. NEW 3D+ Print design, a stronger more reliant model.Recommended after trying the .47 tip and it feels too messy or runny. Ideal to have in your trailer, in most instances the .47 and .625 will work fine with your favorite fastener grade product. ...

This tip is used for seam grade mastics on seams for metal, single ply's, and Mod Bit. This will leave about a 1.0" -1.5" strip on your roof.

Serious Labor Savor! The Large Mouth Tip is ideal for heavy trowel grade mastics. With its 1.9" I.D., the Large Mouth Tip applies 2.5" bead in one pass and seams as fast as you can walk. Pair it with the 1/2 Gallon Roof Tube Classic