RACE Fall Protection

Features: 6-position locking adjustmentsConstructed of heavy duty galvanized steel10” platformCan be repositioned & taken down without damaging shinglesFolds flat for convenient storage and transportReplaceable 3-position tongueCapacity: 1 worker plus 40 lbs. per 8’ stagingMaximum 8’ spacing between bracket5/ Case

Falls through skylights cause severe injuries and death. Now there's a quick and easy way to protect your workers AND allow them to work around a low slope rooftop skylight without being tied off! The RACE Rail Skylight Safety Kit is the first non-penetrating adjustable skylight protection system that allows unobstructed access to the roof surrounding the skylight and it takes just minutes to install! Adjustable to fit a 36" x 36" (3' x 3') skylight up to a 60" x 60" (5' x...

RACE Skylight Net | An Enhanced Level of Safety The RACE Skylight Net fits onto raised-lip skylights or hatch openings with a minimum 2″ vertical lip surface. They are designed to contain a load of 1,000 lbs. The net is manufactured using Safety Orange 1-1/2″ High Tenacity Polypropylene (HTPP) with a 4″ square mesh. Each net is reinforced with sewn rope borders. Unlike other skylight nets, the RACE Skylight Net does not use the skylight as an anchor point and won't damage the skylight if...

This extension pack is for the RACE Rail Skylight Safety Kit. It allows the RACE Rail to fit skylights up to 4' x 8', giving you the power to increase your range of protection. It is easily adjustable, lightweight and made with durable steel, so it can keep the user safe and secure. It comes with a bundle of 4 extensions and 4 L-bolts. Features: Extends Basic RACE Rail Skylight Safety KitWorks on skylights up to 4' x 8'Bundle of 4 Extensions 4 L-BoltsAdjustable Lightweight Durable...

RACE-RB-ADJ, 10” x 30°/45°/60°/90° ADJUSTABLE ROOFING BRACKET CAPACITY: One worker per 8 feet of scaffolding or up to 250 pounds of materials - No more than one person shall occupy any given 8 feet of a Roofing Bracket Scaffold - Use the walking surface to stage material and ease working on steep slope roofs. - Always use OSHA compliant fall arrest system, guardrails, catch platforms or other safety equip­ment as required by Local, State or Federal OSHA Regulation - Roof Brackets are intended...

The Guardian Fall Protection 15500“C-Slab Grabber” is an ideal solution for installing guardrails during concrete decking operations. With the C-Slab Grabber’s new backup safety cable (that keeps the systems from separating), quick adjust handle, and anti-slip tape, this product easily meets or exceeds OSHA’s safety standards. This product is fast and easy to set up and adjusts up to a 36-inch slab. The rails that can be used with this product include: 2 X 4’s, 2 X 6’s, or cable. With its...

RACE Rail 2-In-1 Parapet and Flat Leading Edge Kit OSHA compliant leading edge fall protection system that can be used on both leading edge and a parapet wall. The RACE Rail Parapet/Leading Edge System can be easily installed by one person. The system can accommodate any parapet from 4” to 36” wide. The perimeter clamp can be installed on both flat edge and parapet wall construction. The perimeter clamp is clamped onto the vertical edge of a parapet wall. The RACE Rail System features a...

RACE-RB-F-6-90, 2" X 6” x 90° x 18" long FIXED ROOFING BRACKET On roofs with a 4/12 to 6/12 roof pitch, when in­stalled as a slide guard, the scaffold brackets should provide a platform that is 90 degrees to the roof’s sur­face at a point along the eave of the roof. For roof slopes greater than 6/ 12 up to 8/12 additional 90-degree slide guards must be installed par­allel to the first row no further than every eight feet of roof slope. Ad­ditional fall protection methods are required...

Meets or Exceeds OSHA standards Adjustable from flat roof to 16:12 pitch Includes: 1 roof bracket, 1 toeboard bracket, 1 leg insert, 1 upright Can be used to catch debris for removal System can be used during shingle installation

Meets or Exceeds OSHA standards Adjustable from flat roof to 16:12 pitch Includes: 1 roof bracket, 1 toeboard bracket, 1 leg insert, 1 upright Can be used to catch debris for removal System can be used during shingle installation

RACE-RB-F-8-45, 8” x 45°x 19" long FIXED ROOFING BRACKET, FOR USE ON 12/12 PITCH ROOFS. CAPACITY: One worker per 8 feet of scaffolding or up to 250 pounds of materials - Only for use on roofs - Always use fall protection in accordance with local, state and federal OSHA regulations - Not an anchor point - Roof brackets are meant for use by experienced tradesmen having full knowledge in its use - OSHA regulations require that the employer provide training in the use and care of this product ...