Replacement parts

Key Features:Replacement Hand Held Heat Gun Heating Element. Fits most major brands of heat welding tools including Leister Triac S and BAK RionSimilar to Leister 100.702 element. Follow these installation instructions on how to replace the element on your Leister Triac, BAK Rion or RACE hand-held heat welder: With the tool unplugged and cooled, remove the four mounting screws that hold the heater tube to the hand piece.Pull the heater tube away from the handle.Slide off the mica tube.Remove...

Key Features: Replacement Hand Held Heat Gun Heating ElementFits Leister Triac STSimilar to Leister 142.718 element110 volts1600 watts Follow these installation instructions on how to replace the element on your Leister Triac, BAK Rion or RACE hand-held heat welder: With the tool unplugged and cooled, remove the four mounting screws that hold the heater tube to the hand piece.Pull the heater tube away from the handle.Slide off the mica tube.Remove the gasket.Once the heating element is...

Lightweight at only 27 lbs. Great bounce Excellent load capacity Use on Non-Powered (4-Wheel) Utility Carts, Some Pallet Movers & Insulation Movers

Replacement Mica Tube for Hand Held Heat Welder Element Will fit BAK RiOn and Leister Triac S handheld heat welders

RACE, Garlock & Panther 2-Wheel Wheelbarrows & More..... Lightweight, excellent load capacityDesigned to perform like an air-filled tire without the flats

RACE Roof Cutter Replacement Blade Shaft Assembly. Compatible with Garlock Ultra Cutter Pro & Other Manufacturers. (call for details)  Similar to Garlock's 403465 Saw Shaft Assembly. 

16 x 5 x 4 HoleHeavy Duty WheelSolid TireChevron Pattern

16 x 5 x 4 HoleHeavy Duty WheelSolid TireChevron Pattern

RACE Roof Cutter Rear Wheel Replacement.  Compatible with Garlock Ultra Cutter Pro. Similar to Garlock's 14002 Wheel 12x3x3/4.12x3 Wheel Assy 3/4" BB  Semi pneumatic tire on a metal rim

RACE Roof Cutter Front Wheel Replacement.Compatible with Garlock Ultra Cutter Pro. Similar to Garlock's 402697 Front Fork Complete.

Fits BAK, Leister, Sievert and More -40 MM Band-Silicone

Steel re-inforced and conform to State and Federal safety regulations. Approved by California OSHA #C1718AG and OSHA 1723AG Complies with Federal OSHA 701 (b). Federal OSHA has ruled that if cover is in compliance with Cal OSHA, then it conforms to Fed. 701 (b). Made of engineered high-impact plastic. 16 Sq Inches top surface area aids in protection. Fits a range of diameters. Self-centering formed steel insert seats cover perpendicular to rebar. ...

RACE Roof Cutter Lower Belt Guard Replacement.  Compatible with Garlock Ultra Cutter Pro. Similar to Garlock's 404319 Belt Guard Bottom.

RACE Roof Cutter Replacement Depth Control Rod Assembly. Compatible with Garlock Ultra Cutter. Similar to Garlock's 403802 Depth Control. 

Designed to snap on DISC-10 or HH-M protective covers and create a saddle into which double 2x4’s are secured to create a system to protect a row of in-line rebars. Complies with California’s Safety Order# C-1722-AG Complies with California OHSA- Approval # C-1722-AG Complies with Federal OSHA 701 (b). Federal OSHA has ruled that if cover is in compliance with Cal OSHA, then it conforms to Fed. 701 (b).

-Forward/reverse cable for tear-off machines-Includes nuts and washers-Works on Garlock Roof Warrior, Panther Paws, and Roofmaster tear-off machines

RACE Roof Cutter Blade Guard Wheel Replacement. Compatible with Garlock Ultra Cutter Pro. Similar to Garlock's 140237 Wheel 6x1.5 - .50BB.

RACE Roof Cutter Throttle Cable Replacement

RACE Roof Cutter Front Wheel Bracket Replacement.Compatible with Garlock Ultra Cutter Pro. Similar to Garlock's 402697 Front Fork Complete.

RACE Roof Cutter Lower Belt Guard Gasket.  Compatible with Garlock Ultra Cutter Pro. Similar to Garlock's 153406 Gasket.

Fits BAK, Leister, Sievert and More-40MM White Drive Wheel-Rubber

RACE Roof Cutter Upper Belt Guard Replacement.  Compatible with Garlock Ultra Cutter Pro. Similar to Garlock's 403463 Upper Belt.

Replacement pin for the SPAR Rotary Planer.

RACE Roof Cutter Blade Wrench Lock.  Compatible with Garlock Ultra Cutter Pro. Similar to Garlock's 1512514 Bolt L .38.

RACE Roof Cutter Front Wheel Bolt Replacement. Compatible with Garlock Ultra Cutter Pro. Similar to Garlock's 402697 Front Fork Complete.

RACE Super Tear Off Bar Replacement Blade

RACE Fork Cart Knob Replacements The large knob is located at the top center of the cart and is used to adjust the postioning of the rear wheels.(Need 1 Knob) The small knobs are located at the base of the cart and are used to lock the fork cart "legs" upwards for easy storage and/or maneuverability.(Need 2 Knobs)

RACE Roof Cutter Blade Wrench  Compatible with Garlock's Ultra Cutter Pro. Similar to Garlock's 416832 Arbor Wrench.

RACE Roof Cutter Rear Wheel Axle Replacement 

RACE Roof Cutter Blade Guard Assembly Replacement.

RACE Roof Cutter Front Wheel Bracket Bolt Replacement. Compatible with Garlock Ultra Cutter Pro. Similar to Garlock's 100143 HHCS .50x5.50.

RACE Roof Cutter Replacement Engine Mount AssemblyIncludes:(4) Washers (2) Bolts(2) Lock Nuts

RACE Roof Cutter Depth Control Rod Shock ReplacementIncludes: (1) Shock (2) Washers

RACE Roof Cutter Depth Control Rod Spring Replacement.  Compatible to Garlock Ultra Cutter Pro. Similar to Garlock's 110394 Extension Spring.

RACE Roof Cutter Engine Kill Switch Replacement. Compatible with Garlock Ultra Cutter Pro. Similar to Garlock's 130122 Carling Switch 2FA53-73-TAB.