OSHA Residential Fall Protection

The Guardian Fall Protection Concrete Swivel Anchor is specially designed to include a visual indicator that allows the user to clearly see when it is installed correctly (when proper torque is reached, the red cap will break away to display a green cap). This anchorage connector is composed of galvanized steel, making it capable of functioning in a variety of rough environments, and rotates 180° to allow for increased mobility.Features:  Easy to installVisual indicatorPivots and swivels...

Leading edge retractables (models with an attached shock absorber pack) are designed for use in applications to provide added protection against lifeline wear and/or cutting, when working near leading edges, where a fall may occur. This could include, but is not limited to, roofing or eaves, sheared, cold rolled, or cut steel, and edge work on concrete and various decking operations. USE CAUTION…..and provide additional protection against cutting (i.e. a heavy pad) over the exposed sharp edge....

Tie-Off Straps are made from 2” wide polyester or nylon and are designed for use as temporary anchorage points to connect vertical lifelines, SRL’s, web lanyard and rope lanyards. Use on wood, steel and concrete structures. Tie-Off straps are wrapped, cinched around the structure to make for a secure anchor or can be embedded into concrete and evacuated when finished with the job. Please see the part number list below for Application, Length, Compliance and Packaging information for all our...

Designed specifically for the Metal Building industry, our Super Z-Purlin provides an easy to install anchorage device that includes attachment bolts. The stem height of the anchor is compatible with high rib roofing panels and blanket type insulation. Waterproofing is achieved using a high quality E.P.D.M. gray colored flashing boot and matching stem cover that has an aluminum flange allowing it to be configured easily to any shape panel. The anchor stem features a collapsible design that...

Safety Bar Temporary/Reusable Anchor The Safety Bar is a unique fall protection anchor for use while working with open truss situations. It spans 3 trusses and locks in securely with detent pins while gauging the trusses 24” on center. 2 users and tie off to the safety bar with the use of a shock absorbing lanyard or SRL’s. Our Safety Bar is the only product on the market for open framing fall protection and is used by framing crews across the country for OSHA compliance during the absolute...

The Guardian Fall Protection Stair Mount is an ideal solution for the installation of guardrails on unfinished stair cases, which can be some of the most dangerous locations on a construction site. Composed of powder-coated steel for superior durability and weather resistance, the Stair Mount is suitable for installation onto both wood and concrete substrates with just 4 fasteners.Key Features: Mounts with 4 screws or nailsEngineered to be used on concrete 2,000 psi or strongerDimensions...

The Guardian Fall Protection Stair Mount is an ideal solution for the installation of guardrails on unfinished stair cases, which can be some of the most dangerous locations on a construction site. Composed of powder-coated steel for superior durability and weather resistance, the Stair Mount is suitable for installation onto both wood and concrete substrates with just 4 fasteners. Key Features:  Easy to install Lightweight and durable Install onto wood or concrete Mounts...

The Guardian Fall Protection Bolt Hole Anchor is a reusable 5,000 pound certified anchorage connector that can be used in either horizontal or vertical applications. Incredibly easy to install, the Bolt Hole Anchor simply needs to be squeezed to release its locking mechanism, inserted into a compatible hole ranging from 3/4" to 1—1/4" in width, and then released to reengage the locking mechanism.Features:  Easy to installCompatible with horizontal lifelinesSqueeze to open, release to lock...

The Guardian Fall Protection CB-1-W Weld-On Anchor is 2.75" in diameter, and may be used in a variety of fall protection applications. It includes a forged steel D-ring and can withstand loads up to 5,000 pounds. This anchor is suitable for installation onto either vertical or horizontal steel structures.Features: Weld on steel applicationTemporary anchor pointPermanent application permissible if user applies appropriate finishForged steel D-ringApplicable Standards: OSHA 1910 & OSHA...

The Guardian Fall Protection “Universal Guardrail Posts” are designed to work along with Guardian’s other guardrail mounting options. The product is composed of lightweight welded steel and installs easily into Guardian Fall Protection guardrail gusset mounts (15159 and 61027). The maximum spacing between each post is 8' apart.  Features: Installs easily into mountsAlso available in 52" & 74" size options (please call) Applicable Standards: OSHA 1910 & OSHA 1926 Subpart...

Tie-Off Straps are made from 2” wide polyester or nylon and are designed for use as temporary anchorage points to connect vertical lifelines, SRL’s, web lanyard and rope lanyards. Use on wood, steel and concrete structures. Tie-Off straps are wrapped, cinched around the structure to make for a secure anchor or can be embedded into concrete and evacuated when finished with the job. Please see the part number list below for Application, Length, Compliance and Packaging information for all our...

Tie-Off Straps are made from 2” wide polyester or nylon and are designed for use as temporary anchorage points to connect vertical lifelines, SRL’s, web lanyard and rope lanyards. Use on wood, steel and concrete structures. Tie-Off straps are wrapped, cinched around the structure to make for a secure anchor or can be embedded into concrete and evacuated when finished with the job. Please see the part number list below for Application, Length, Compliance and Packaging information for all our...

FallTech 7410M Reusable, Hinged Roof Anchor with heavy duty D-ring is constructed using alloy steel with a yellow chromate finish. Manufactured for attachment to metal decking, its hinged design conforms to most roof peaks and can be mounted perfectly flat Features 10" x 3" anchoring plates with 2-1/4" connecting D-ringHinged design conforms to flat or sloped surfaces up to 12/12 pitch.Includes 2-1/2" sheet metal screws for steel deck and metal roof installationFor temporary reusable...

The Guardian Fall Protection Beamer 3000, the newest in our line of beam anchors, combines the many versatile features of the Beamer 2000 with some new innovations. The Beamer 3000 weighs 25% less than its predecessor, making it one of the lightest beam anchors available on the market. It also includes a dual adjustment feature that makes it even easier to adjust to its ideal position. No more unsnagging a connector or a lifeline when working at heights, the new and improved Beamer 3000...

Meets or Exceeds OSHA standards Adjustable from flat roof to 16:12 pitch Includes: 1 roof bracket, 1 toeboard bracket, 1 leg insert, 1 upright Can be used to catch debris for removal System can be used during shingle installation

Meets or Exceeds OSHA standards Adjustable from flat roof to 16:12 pitch Includes: 1 roof bracket, 1 toeboard bracket, 1 leg insert, 1 upright Can be used to catch debris for removal System can be used during shingle installation

This Toeboard attachment is a component of the Guardian Fall Protection Stacker Bracket System. Toeboards are required on all guardrail systems if there is any risk for equipment or materials to fall to a lower surface, and are always recommended. The Toeboard attachment fits to the Stacker Bracket Frame to allow for the safe and easy installation of toeboards. Features:  Attachment for hanging scaffolding Durable  Applicable Standards: OSHA 1910 & OSHA 1926 Subpart...

The Guardian Fall Protection Beamer 2000 is a versatile Fall Arrest anchor designed for use both overhead and at foot level. Attachable to both steel I and H beams, the Beamer 2000 offers Nylon bushings to provide smooth movement along the beam, that also function as impact indicators in the event of a fall. This extremely durable anchor also includes a precision machined aluminum bar and ratcheting end pieces, which allow for quick and easy adjustment with just one hand. When used at foot...

Permanent Truss Anchor Installs on roof truss members 2 x 4 or larger Available as an anchor only or as a kit including weather flashing and cap Durable Stainless steel construction for long life May be installed before or after installation of roof sheathing All fasteners included