Fall Protection

The Debris Netting offered by Guardian Fall Protection is designed and manufactured with a specialized double-strand configuration, as well as an ultraviolet protective coating, which make for a supremely durable and long-lasting product. It is also designed to withstand wind, rain, sun, and other potentially hazardous environmental conditions, and is compliant with all applicable OSHA 1926 Subpart M regulations. This netting functions as a guardrail system with the additional feature of...

The V-Line Harness is our dynamic solution for essential fall protection needs. The lightweight, streamlined design optimizes mobility and comfort. Offered in a variety of configurations.FEATURES 1 Dorsal D-ring2 Side positioning D-ringsFriction buckle torso adjustersMating buckle chestTongue buckle legsShoulder PadFloating waist padPass-through chest buckleGrommet waist belt and leg strapsVelcro label protector on back-strapEconomicalConvenient lanyard keepersFall arrest indicators310 lb....

Working at heights is a dangerous job to begin with and adding any extra weight to your load can be cumbersome and cause wasted energy. That’s why the Malta Dynamics the Pygmy Hog 6′ Self-Retracting Lifeline is designed to be the best mini retractable available on the market. Weighing in at just 2.4 lbs., the extremely lightweight Pygmy Hog is portable and can be used as one unit or in a kit of two. The Pygmy Hog Self-Retracting Lifeline is a Webbed SRL that is manufactured from non-corrosive,...

Malta Dynamics 4.5′ – 6’ Single Leg Stretch Internal Shock Absorbing Lanyard with 2 Steel Snap Hooks is specifically designed to help reduce the hazards of tripping or catching on nearby machinery found on many of today’s industrial and construction sites. This lanyard is ideal for work in tight spaces and around machinery. This lanyard is designed to stretch from 4.5 feet when at rest out to 6 feet when needed. It is available in a variety of connector options, as well as both single and...

The Non-Shock absorbing lanyards are available in a variety of lengths, from 2 to 6 feet. With connector options including, Snaphooks and Rebar hooks. These lanyards are for use in a work positioning and restraint applications only (Because they do not include a  hock absorbing component) They are composed of durable nylon and allow workers to attach to an anchorage point or system with enough length to safely complete the job. Features 3' Non-Shock Absorbing Lanyard -...

The Guardian Fall Protection 3-Rung Ladder Jack is MIG Welded and possesses a riveted construction for superior strength and durability. It is set-up over 3 consecutive ladder rungs, can be used on either side of a ladder, and is ideal for painting, siding, and repair applications. This jack is easy to both install and remove, and will even accommodate planking up to 18 inches wide when used in combination with a paired Ladder Jack, and installed and used in accordance with all applicable OSHA...

The Non-Shock absorbing lanyards are available in a variety of lengths, from 2 to 6 feet. With connector options including, Snaphooks and Rebar hooks. These lanyards are for use in a work positioning and restraint applications only (Because they do not include a shock absorbing component) They are composed of durable nylon and allow workers to attach to an anchorage point or system with enough length to safely complete the job. Features Lightweight and DurableFacilitates 100%...

The Malta Dynamics temporary horizontal lifeline is made from a high-strength poly-rope that spans between two anchor points to create an anchorage system that allows multiple workers to tie-off safely. The temporary horizontal lifeline bag comes as a complete system that includes a tensioning device, energy absorber, rope, steel O-Rings, self-locking carabiners, and cross arm straps. The only parts that aren’t included in this HLL bag are the anchor points. The anchors you use with this...

The Guardian 15159 Standard Gusset mount allows for guardrail systems to be installed flush with outside walls. Guardrail posts used in combination with this gusset are compatible with bot 2 x 4 in. boards and Snap-on metal railings. The standard Gusset mount may be used in multiple installation locations if undamaged, although new fasteners must always be used with each new installation application Features: Easy to installInstalls with Screws or NailsReusableGalvanized Steel Applicable...

The Malta Dynamics 100′ 3-Way Recovery SRL is built to blend functionality and affordability. Easy to handle, adjust, and install, it is both durable and dependable. With a quick-activating retrieval mechanism for emergency evacuation, you can expect superior performance and 100% reliability from the Malta Dynamics Rescue line of SRLs. This Block allows the fall to arrest and also allows easy hoisting of the victim with the help of its inbuilt winch mechanism. ...

The Guardian Fall Protection Halo Series Web Self-Retracting Lifeline (SRL), formerly the Edge Series Web SRL, is designed with a specialized quick-action braking system, and is manufactured from non-corrosive, lightweight components. Extremely durable and compact, Halo SRLs will stand up to even the harshest working conditions.Features: Carabiner includedDurable aluminum housingSwivel topApplicable Standards: ANSI Z359.14-14, ANSI A10.32-12, OSHA 1926 Subpart M, OSHA 1910Worker...

Complying with OSHA 1926.502(b)(1) standards, Tie Down's Steep Slope Guardrail is engineered for top-tier safety on steep roofs. Crafted with meticulous attention to quality, this guardrail system combines high-grade materials made in the USA, ensuring exceptional corrosion resistance and long-lasting durability. Adaptability is at the core of this guardrail's design, offering five adjustable pitch positions ranging from 4/12 to 16/12. This versatility enables you to confidently work on a...

Self-closing and double-locking gate function with 1" open capacityOne-hand operation for quick connection of fall arrest system components.For multi-purpose, multi-use applications within a wide range of connecting scenarios4" x 2" inside dimensionsComplies with ANSI Z359.12-2009Rugged forged alloy steel constructionOne-hand operation provides user with ease of use even when wearing glovesUser installed steel Captive Pin helps guard against misplacement or loss of carabiner when not in...

The 16-Inch D-Ring Extender features single-leg construction and utilizes 1-inch polyester webbing for resistance to UV light and abrasion. The webbing also has a tensile strength of 9,800 pounds, and features embedded wear-indicating threads. It also features double-locking snap hooks at the attachment and anchorage ends. The StayPut buckle allows the length to be adjusted from 4-1/2-to-6-feet to eliminate unnecessary free-fall. The end terminations feature wear pads for additional safety and...

The Halo Big Block Cable SRL, formerly the MK Premium Edge SRL, is another great addition to our quality line of SRLs. It is both lightweight and supremely durable, and incorporates corrosion-resistant stainless steel and aluminum components to ensure superior functionality throughout the product lifetime. This SRL also includes an ergonomic handle, is available in both 50 and 65 foot models, and includes a variety of connector component options. Features: Carabiner includedDual-braking...

Rugged Alloy-Steel construction2-1/4 in. gate openingRated at over 8,000 lbsSelf-closing and double-locking gate function with 2-1/4” open capacityOne-hand operation for quick connection of fall arrest system components.For multi-purpose, multi-use applications within a wide range of connecting scenarios8" x 4-1/4" inside dimensionsComplies with ANSI Z359.12-2019

The Guardian Fall Protection Truss Boss Anchor Kit provides everything required for the set-up of a premium roof truss anchor. In addition to a non-corrosive Truss Boss Anchor, this kit also includes waterproof flashing for both composite and tile roofs, and also an anchor cap specially designed to protect the Truss Boss from weather, as well as to not blow off in high winds. The included Truss Boss can be installed on the truss while the truss is still on the ground for additional safety, and...

The Guardian Fall Protection Rope Grab is easy to install and is designed to lock automatically in the event of a fall. Rope Grabs are available in a variety of configurations, are compatible with 5/8" safety ropes, and are supremely durable. Removable rope grabs are easy to installFits 5/8" safety ropesLock automatically when a fall occurs Applicable Standards: OSHA 1926 Subpart M and OSHA 1910Worker Capacity Range: 130-310 lbs.Material: Galvanized steelMin. Breaking...

The Tie Down Two-Way Standing Seam Roof Anchor is able to fit most brands as well as styles of standing seam roofs. It is completely reusable and designed to be completely reversible allowing for seams up to 1 in. Designed to not cause damage and for one person single tie off as well can be used with retractable lanyards, vertical lifelines, and shock absorbing lanyards. Moving and storing on the job site is easy due to the compact size. Fall protection anchors are to be used in a horizontal...

The Shock Absorbing Lanyard is the premiere free fall lanyard offered by Guardian Fall Protection. It meets all the stringent ANSI Z359.13-2013 regulations, and the integrated shock absorbing component limits average arresting forces to 900 pounds or less. It is comprised of 1 inch nylon webbing, and is available in a variety of lengths and connector options, including steel and aluminum snap hooks and rebar hooks, all of which make it one of the most functional and durable lanyards on the...

The Suspension Trauma Ladder is a self-deployed Personal Protection Equipment device used to relieve trauma resulting from free fall suspension until rescue can be made. When someone falls in a harness and is suspended for a period blood will begin to pool in the legs and sometimes in less than 5 minutes the person can faint. The situation becomes more dangerous because the harness leg straps can severely restrict the flow of blood altogether by cutting off the flow of blood to the femoral...

The Parapet Wall Anchor installs easily onto existing parapet walls with no need for any additional tools or penetration of the wall surface. Suitable anchor point connection for work positioning or descent off a building roof or as the anchor point in your personal fall arrest system. Features:  Accommodates concrete parapets 2.36″ (6cm) to 14.17″ (36cm)Easy installation method for high productivityHigh strength steel constructionPortable and reusableBuilt-in tie-off D-ringNon-penetrating...

The PitchPro is a premier fall protection anchor designed for sloped-roof asphalt shingle construction. The PitchPro is the perfect solution for both new and existing construction, and its low-profile installation makes it an excellent choice for permanent applications. Its oversized connection point makes attaching and detaching easy and bind-free. Made from robust powder-coated steel, the PitchPro resists damage from repeated installations, and ensures the longest possible lifespan....

The new Falltech Chain Roof Anchor, is a highly portable and reusable anchor to be used on residential and commercial wood structures.  The Anchors O-Ring serves as the attachment point for either a PFAS or on HLL system. With it's heavy steel anchoring plates and flexible belted rubber center, the Chain Roof Anchor can be installed either on the ridge or on the field of a roof and may be used on flat or pitched surfaces. The Anchor is Easily installed with nails as a Single-Point anchor...

The Guardian Fall Protection Polydac Rope Vertical Lifeline Assembly is one of the strongest conventional rope assemblies available today. It is 100% resistant to rot and mildew, even if stored when wet, and has excellent resistance to alkalis and most solvents. It also provides good protection against abrasion, and has a melting point of over 300 degrees. Polydac Rope has a working load elongation of 8%, and absorbs more energy than any other type of rope available on the market—12 times as...

The Galvanized Warning Line System by Tie Down offers a complete, out-of-the-box roof warning line system solution. The galvanized system offers easy and simple installation that is ready to use in minutes. It includes four 24" platforms with handles for easy carrying on the job site and four 36" vertical line tubes that hold the warning line. This kit also includes 100' of warning pennants and the hot dipped galvanized coating ensures a corrosion resistant system, especially against rough...

FallTech vertical lifelines are constructed of premium grade filament and spun polyester over a polyolefin core that provides low elongation and long wear life, abrasion, UV and chemical resistance, and yet stays flexible and renders sure grip and glide through our rope grabs. Constructed with construction-grade 5/8" copolymer 3-strand twisted ropeSteel thimble and splice-protecting shrink tube are included for lasting durabilityIncludes alloy steel snap hook for anchorage connectionBack-splice...

The Cyclone Harness offers superior comfort, styling, and safety. Our design engineers took the basics of what makes a harness effective and safe, and made holistic improvements to allow workers to do their jobs more comfortably and with added versatility, all without breaking the bank. They Cyclone features ultra-flow padding that helps keep moisture away from the body, and the double-grommeted tool belt provides the ultimate in support. A variety of buckle configurations are also available....

3 strand construction provides log elongation and durability abrasion, UV and Chemical resistant for long life

Self-drilling metal screws for use on the Guardian Skyhook and CB Roof Anchors. Bag of 40 screwsWood and metal deck screws available#14-14 x 2" galvanized screws for metal

The anchor can be installed as a retro/reroof application or in new construction on low- and high-profile tile and slate roofing material. This is a double D-ring anchor that measures 40” in between the D-rings which allows them be exposed just under the last course of tile. The unique design does not require a conventional flashing system because the anchor does not penetrate the sheeting. It installs with 8 spiral shank stainless steel nails and includes a butyl flashing strip to provide a...

The Cyclone Harness offers superior comfort, styling, and safety. Our design engineers took the basics of what makes a harness effective and safe, and made holistic improvements to allow workers to do their jobs more comfortably and with added versatility, all without breaking the bank. They Cyclone features ultra-flow padding that helps keep moisture away from the body, and the double-grommeted tool belt provides the ultimate in support. A variety of buckle configurations are also available....

The Non-Shock absorbing lanyards are available in a variety of lengths, from 2 to 6 feet. With connector options including, Snaphooks and Rebar hooks. These lanyards are for use in a work positioning and restraint applications only (Because they do not include a shock absorbing component) They are composed of durable nylon and allow workers to attach to an anchorage point or system with enough length to safely complete the job. Features Lightweight and durableFacilitates 100%...

ViewPack™ Shock Absorbing Lanyards set the standard for energy absorbing lanyards. A traditional pack-style shock absorber with clear PVC inspection window allows for easy inspection of the internal materials while protective label covers enhance the durability and product lifespan. Heavy-duty 1" polyester web construction throughout provides extreme UV resistanceEnergy absorber features patented ViewPack® cover with inspection window.Includes alloy steel snap hooks for harness attachment...

Universal Fit, Back D-Ring, Mating Buckle Chest & Leg Straps5 point adjustability, two lanyard keepers, 6300 lb. heavy duty polyester webbing. Replacement harness for the FallTech 8593A Basic Roofer's Kit. Plated alloy steel mating buckle torso adjusters deliver economical fitPaired lanyard parking keepers provide balanced function for single and double-leg lanyards.Plated alloy steel dorsal D-ring with mating buckle chest and leg closuresComplies with ANSI Z359.11-2014 ...

The 11’ Pygmy Hog SRL with Rebar Hook from Malta Dynamics is a versatile, light-weight personal lifeline for many applications. The bright poly webbing is easy to inspect, and the hard polymer exterior is durable for every-day use. This 11’ Class 1 SRD is designed for anchorage above the back D-Ring and can be used as a single lifeline with its 360-degree swivel top or can be used for 100% tie-off as a dual lifeline. The popular Rebar hook is also known as a pelican or scaffold hook and has a...

SafeWaze Rivets for FrogLink Anchors 019-2005 & 019-2006  8 mm Gesipa Bulb Rivets

The 4-Person Rope HLL with cross arm straps is our advanced rope horizontal lifeline kit built for durability and efficiency with multiple users. This comprehensive system features double braid rope which acts as the energy absorber, a swivel connection point to keep the rope from twisting and a tensioner with a stored, detachable wrench.  Features: Available in lengths from 30'-100'Rugged double braid ropeRope tensioner with convenient built-in wrenchSwivel connection point eliminates...

Introducing the newly redesigned PR 600 mobile anchoring system, now available at a lower price. This complete system, which includes a cart, ballast weights, and pivot plates, provides fall protection for up to three people, with two for fall arrest and one for fall restraint. The system is now lighter and easier to assemble and disassemble, making it easier to lift over ducts and piping that may lay over the roof's work surface. The component parts can even be taken up to the roof in an...

The Malta Dynamics Reusable Roof Anchor is a reusable anchorage connector designed for temporary use on wood rooftops. Our roof anchors fit all roof pitches from flat to 12/12 and their thick-plated steel construction means longer lasting product life. Supplied with all necessary fasteners.Key Features:● Meets OSHA 1910, OSHA 1926 Subpart M, and ANSI A10.32-12● Can be installed with screws or nails● Fits up to 12/12 roof pitch● Fasteners provided● For temporary use on wood rooftops● Worker...

We know the workday is full of rough hazards and bumps that can quickly run down the integrity of your tools and equipment, so Malta Dynamics engineered the Razorback™ Heavy-Duty 30′ Self-Retracting Lifeline to be the TOUGHEST SRL on the market. This heavy duty SRL incorporates a state-of-the-art newly designed quick-action braking system that will allow you to move with ease as you complete your job while providing the security and capability to arrest a fall and save your life, if needed....

The Cyclone Harness offers superior comfort, styling, and safety. Our design engineers took the basics of what makes a harness effective and safe, and made holistic improvements to allow workers to do their jobs more comfortably and with added versatility, all without breaking the bank. They Cyclone features ultra-flow padding that helps keep moisture away from the body, and the double-grommeted tool belt provides the ultimate in support. A variety of buckle configurations are also available....

RACE Rail 2-In-1 Parapet and Flat Leading Edge Kit OSHA compliant leading edge fall protection system that can be used on both leading edge and a parapet wall. The RACE Rail Parapet/Leading Edge System can be easily installed by one person. The system can accommodate any parapet from 4” to 36” wide. The perimeter clamp can be installed on both flat edge and parapet wall construction. The perimeter clamp is clamped onto the vertical edge of a parapet wall. The RACE Rail System features a...

The Saber allows for 2 person fall arrest and 1 person fall restraint. The compact design allows for transport in the back of a pickup and can fit through doorways, elevators and roof hatches. The counterweights remove easily to reduce weight while moving. Incorporating the best features from the Stinger, The Saber features increased worker capacity with a reduced weight and is just as mobile as the original. Gone is the original dolly moving system-the Saber has an integrated axle for...

The new Malta Dynamics 11’ Web SRL is manufactured with a durable Dyneema Fiber lifeline. It features a swivel top and a steel snap hook, as well as lightweight and durable Polymer housing. The 11’ SRL includes a quick-action braking system, is manufactured from non-corrosive, lightweight components. Key Features: Compact, lightweight designUse in single or dual lifeline applications360-degree swivel topFor overhead use onlyCarabiner included ...

The 6 ft. Adjustable Web Restraint Lanyard features single leg construction and utilizes 1 in. polyester webbing for resistance to UV light and Abrasion. The webbing has a tensile strength of 9,800 lbs. and features embedded wear-indicating threads. The lanyard comes with double-locking snap hooks at the attachment and anchorage end. The stay put buckle allows the length to be adjusted form 4-1/2 - 6 ft. to avoid unnecessary free fall. The end terminations feature wear pads for additional...

The Cyclone Harness offers superior comfort, styling, and safety. Our design engineers took the basics of what makes a harness effective and safe, and made holistic improvements to allow workers to do their jobs more comfortably and with added versatility, all without breaking the bank. They Cyclone features ultra-flow padding that helps keep moisture away from the body, and the double-grommeted tool belt provides the ultimate in support. A variety of buckle configurations are also available....

The Guardian Fall Protection 10726 Tool Lanyard with mini carabiner is incredibly lightweight and is ideal for the transportation of tools during work. It is certified to carry tools up the 15 lbs. in combined weight, and can be installed to a tool belt or around the wrist. The mini carabiner gate is self-closing and helps reduce the risk of injuries from falling tools Features: Helps reduce falling object related injuriesSecurely attach tools to wrist or tool beltTwo connection options for...