Fall Protection

Specified for HLL end and intermediate anchors, that require bolt, field weld, or concrete embedment attachment to the supporting structure. A Super Anchor exclusive design that allows up to 4 different horizontal lifeline components to be attached to a single anchor point. These are supplied as a 2-part system – the base with riser and the 4-way Top Fixture. This method facilitates the installation of the riser flashing without interference of the top fixture. The 4-way is attached to the...

This harness features a rear coated D-Ring and Adjustment Buckles make it completely electrically insulated. It has been specially designed for those working in conditions where there are possible electrical hazards. FEATURES Completely Insulated Rear D-Ring & Adjustment BucklesHi-VizH™ WebbingDesigned for Working near Electrical HazardsComplies with OSHA & ANSI Specifications

Flex Energy Absorbing Lanyards are designed to expand and contract during use. They have an internal shock absorbing component to reduce free fall forces. Ideal for use with lift equipment or stationary work areas working with lift equipment. Product Features: Lightweight expandable service length up to 6ftFall indicator and annual inspection label3,600lb (16kN) gate strength connectorsSupplied in retail box

The Pro-Series Fall Arrester Harnesses is an upgraded harness from our Fall Arrester Series. We offer this harness in a variety of colors and sizes. This harness has 5-points of adjustability and features 100% EDC coated quick connect buckles. To eliminate annoying loose webbing ends we designed this harness with loop-type shoulder straps. The fall indicator on the back of the harness provides users a visible indication if a fall has occurred with the harness. All Super Anchor Safety energy...

Features5-Point AdjustabilityQuick Connect Buckles100% EDC Coated Black HardwareElastic Webbing KeepersHeavy Duty D-Ring PadDual Fall IndicatorsEnglish/Spanish Warning LabelsPro-Series Custom Harness Design offers additional webbing choicesComplies with OSHA and ANSI Standards

The Toss’R™ Self Retracting Lanyards (SRL’s) are designed to arrest a fall when a worker falls. They are available in 6’ and 11’ web lengths. They have a centrifugal braking design that locks up when the webbing is deployed more than 4.5 per second. It connects to the rear harness D-Ring for fall arrest or the side D-Ring for fall restraint. Includes a built-in energy absorber and a captive aluminum auto lock carabiner. The service life is between 1-5 years depending on the environment and...

Ladders cause approximately 164,000 hospital treated injuries and 300 deaths per year. Ladder Latch presents a device that could help prevent this from happening to you. Ladder Latch is a fastened extended ladder component that can be mounted temporarily or permanently to the edge of any commercial/industrial buildings' wood blocking. The device attaches any approved extension ladder, and secures the ladder from displacement.  Ladder Latch helps to overcome the shortcomings or traditional...

Ladders cause approximately 164,000 hospital treated injuries and 300 deaths per year. Ladder Latch presents a device that could help prevent this from happening to you. Ladder Latch is a fastened extended ladder component that can be mounted temporarily or permanently to the edge of any commercial/industrial buildings' wood blocking. The device attaches any approved extension ladder, and secures the ladder from displacement.  Ladder Latch helps to overcome the shortcomings or traditional...

The PX3 mobile fall protection system offers unparalleled portability while being 45% lighter than others on the market at 430 lbs. The PX3 lifts into place, allowing the users to quickly click off and get to work. When the work moves, the PX3 can quickly be relocated. Handling up to five workers at a time, three in fall arrest and two in fall restraint, this "best-in-class" solution ships job site ready on a standard pallet. UNMATCHED PORTABILITY: The PX3 mobile fall protection system...

As pioneers in crafting exceptional mobile fall protection systems, we proudly introduce the PX5 Sentinel – a versatile and efficient solution designed to protect up to seven workers simultaneously. Its impressive capacity secures 5 workers in fall arrest and 2 in restraint, guaranteeing comprehensive on-site safety. Weighing less than 1300 lbs., it effortlessly combines protection and mobility. Crafted for easy integration across various surfaces, including concrete, EPDM, and TPO roofing...

Tie Down's Socket Guardrail Base stands out as the lightest guardrail base in the United States, weighing just 58 lbs. Its innovative design includes base plates that nest and stack efficiently, simplifying transportation and storage. Featuring convenient toe board slots and handle holes, this base reduces the risk of soft tissue injuries during handling on the job site. It comes with the option of a galvanized finish for enhanced durability and resistance. Suitable for both permanent and...

BlueWater's SafetyRail 2000 Guardrails and Weighted Rail Base provide non-penetrating passive fall protection and fall prevention. These safety rails can be used either temporarily or permanently around roof edges, elevated platforms, and other high work areas that require safety railing and compliance with OSHA regulations. These roof safety rails are designed for easy setup and breakdown as a portable guardrail system. It can be assembled, disassembled, and transported between job sites on a...

BlueWater's SafetyRail 2000 Guardrails and Weighted Rail Base provide non-penetrating passive fall protection and fall prevention. These safety rails can be used either temporarily or permanently around roof edges, elevated platforms, and other high work areas that require safety railing and compliance with OSHA regulations. These roof safety rails are designed for easy setup and breakdown as a portable guardrail system. It can be assembled, disassembled, and transported between job sites...

The Guardian Fall Protection Beamer 2000 is a versatile Fall Arrest anchor designed for use both overhead and at foot level. Attachable to both steel I and H beams, the Beamer 2000 offers Nylon bushings to provide smooth movement along the beam, that also function as impact indicators in the event of a fall. This extremely durable anchor also includes a precision machined aluminum bar and ratcheting end pieces, which allow for quick and easy adjustment with just one hand. When used at foot...

Permanent Truss Anchor Installs on roof truss members 2 x 4 or larger Available as an anchor only or as a kit including weather flashing and cap Durable Stainless steel construction for long life May be installed before or after installation of roof sheathing All fasteners included

The Vertical Wall anchors are designed for exterior wall applications as an overhead anchorage device that is nearly invisible from the ground. Fabricated from 11-gauge 430 stainless steel in two models to adapt to varying slope roofs. The install at the wall plate and top chord junction with a single bolt and 4 16d vinyl sinkers that are supplied with each anchor. Perfect for siders, window installers and painters. Can be painted for minimum visual effect. Designed to accommodate the bird...

The fixed length web lanyards are specified for fall restraint use but may be used with an energy absorber for fall arrest. Manufactured at Super Anchor Safety factory in Monroe, WA USA. Product Features: 8,700lb 1.0” Nylon Webbing3,600lb gate strength connectorsNon-energy absorbingSerial NumberedPID and inspection labelInstruction ManualOSHA and ANSI Compliant

Size XL, Back D-Ring, Pass-Thru Chest Buckle & Tongue Buckle Leg StrapsSize XL, supple back plaque. 1.75" wide polyester web (blue) top, yellow bottom.

FallTech 7039 WeldTech Vest-Style, industrial grade full body harness with back and side D-rings for fall arrest and positioning. Built with High Strength, Char-Resistant Nomex webbing and is ideally suited for welding applications, foundries, or any environments where exposure to harsh chemicals and high heat are a concern. Features: Three D-rings (Back and Sides)5-Point adjustability Quick connect buckle leg strapsHeavy-duty back strap2-Lanyard keeper7,000 lb. Nomex WebbingMeets and or...

Comfort, function and fit are the focus of our large Tower Climber harnesses. A perfect balance of Seat and Back support is achieved with our full-range adjustability throughout the rig. Features: Extreme comfort Saddle Seat padding for extended positioning workDual internal lightweight aluminum support bars & ballistic nylon outer skin for rugged durabilityRemovable Saddle Seat w/ 4-point adjustability & attachment for waist support assembly at hips/backLumbar supported ComforTech waist pad...

Comfort, function and fit are the focus of our large Tower Climber harnesses. A perfect balance of Seat and Back support is achieved with our full-range adjustability throughout the rig. Features: Extreme comfort Saddle Seat padding for extended positioning workDual internal lightweight aluminum support bars & ballistic nylon outer skin for rugged durabilityRemovable Saddle Seat w/ 4-point adjustability & attachment for waist support assembly at hips/backLumbar supported ComforTech waist pad...

The Guardian Fall Protection Stretch Lanyard is ideal for work in tight spaces or around machinery, since its stretching capability helps reduce hazards of tripping or catching on moving parts. This lanyard stretches from between 4—1/2 to 6 feet, and is available in a variety of connector options, as well as both single and double leg models. It is supremely lightweight, and its unique design eliminates the need for an external shock absorber. This product may be received with orange or black...

The Guardian Fall Protection Big Boss Extended Free Fall Lanyard is the new heavy duty lanyard option in the Guardian line of products. for workers within the worker capacity range of 130-310 pounds, the Big Boss can be used as an extended free fall lanyard for free falls up to 12 feet. And for workers between the capacity range of 310-420 pounds, it can be used as a standard shock absorbing lanyard for free falls up to 6 feet.Features:  Lightweight and durableExtended free fall...

The Guardian Fall Protection Big Boss Extended Free Fall Lanyard is the new heavy duty lanyard option in the Guardian line of products. for workers within the worker capacity range of 130-310 pounds, the Big Boss can be used as an extended free fall lanyard for free falls up to 12 feet. And for workers between the capacity range of 310-420 pounds, it can be used as a standard shock absorbing lanyard for free falls up to 6 feet.Features: Lightweight and durableExtended free fall...

X1240 The Grabber® Mobile Fall Protection System provides two overhead anchor points – anytime, anywhere. The Grabber® meets OSHA fall protection codes and ANSI Z359.6 design requirements for fall arrest systems, and has been validated by an independent 3rd party ISO 17025 testing laboratory. The versatile Grabber® is designed to be used in either fall arrest or fall restraint and features a one-of-a kind adjustable mast that can be positioned anywhere between 2’ and the unprecedented maximum...