The Ladder Latch - Gutter Mount Applications, Extended Hand Rail Ladder Attachment, 39", Non-Corrosive Aluminum

Ladders cause approximately 164,000 hospital treated injuries and 300 deaths per year.

Ladder Latch presents a device that could help prevent this from happening to you.

Ladder Latch is a fastened extended ladder component that can be mounted temporarily or permanently to the edge of any commercial/industrial buildings' wood blocking. The device attaches any approved extension ladder, and secures the ladder from displacement. 

Ladder Latch helps to overcome the shortcomings or traditional ladder safety setups:

1. A simple bungee cord securing the ladder to the edge of the building
2. Needing to step around the ladder when entering and exiting the ladder
3. Safely attaching safety flags or rail systems to the ladder for an approach
4. Safely setting up a Ladder up alone (once the device is installed, the ladder attaches easily and quickly securing the ladder to the building; no longer needing someone on the ground to hold the ladder)

The extended hand rails extend over 39" over the upper landing surface that allow you to walk through the hand rails, which means no more need to step around the edges of the ladder. This device provides a safe transition from ladder to landing surface.

Ladder Latch is:

• Fully Patented
• OSHA Compliant
• Quick and easy to install
• Lightweight

Kit Includes:

• Ladder Latch Device
• Instruction Manual
• Safety Manual
• 1/2" x 3-1/4" Spax T Star Washer head powerlag HCR fasteners

1. Scrape roof surface of all stones, rock, slag, etc., in area you are mounting the Ladder Latch.
2. Verify that the placement of the Ladder Latch is not near any electrical lines, is not blocking any fire exit doors, and it is on level ground for secure deployment of the ladder.
3. Once the Ladder Latch is safely brought to the roof, place the device approximately 1" away from the roofing edge.
4. Then apply a water block or butyl tape on the bottom side of the base plate. (Be sure that there is enough water block or butyl tape to cover the entire surface once pressed onto the roof.)
5. Fasten the device to the wood blocking using all fastening holes using 1/2" x 3-1/4" Spax T Star Washer head powerlag HCR fasteners (Be sure to tightly fasten.)
6. Once the Ladder Latch is secured to the building, Latch your Ladder onto the device and begin use.