Railings

The Guardian Fall Protection Parapet Clamp Guardrail is an economical and easy to use system. An often overlooked option in the world of fall protection, guardrails and warning lines function to block workers from exposure to fall hazards, often entirely eliminating the need for other types of fall protection equipment. Each clamp is provided with a corresponding guardrail post, which is compatible with 2x4” boards. This system can fit any parapet from 4 to 24 inches in width, and an entire...

Works with Open Edge Guardrail System (#12075) to form complete residential protectionUse Acro’s proven 12070 Steep-pitch Guardrail Brackets along the eave-edges from 4/12 to 16/12; in conjunction with Acro’s exclusive 12075 Open-edge Guardrail Brackets (sold separately) on rake-edges of any pitch and eave-edges under 4/12 pitch to form the backbone of a complete residential guardrail system. Two sets of 2 x 4's are used with a toe board to form a continuous guardrail around the entire roof...

The Acro parapet guardrail system allows contractors to setup fall protection quickly and safely without additional hardware. This system does not penetrate the building or roof substrate, and has a safety bracket that simply locks onto parapet with adjustable hand screw and cross rails that require no tensioning. This parapet wall bracket comes with a guardrail post holder and a second post to hold two 2' x 4' boards. When the 2ft x 4ft boards are inserted through the post slots in...

Works with Steep Pitch Guardrail System (#12070) to Form Complete Residential Protection Use Acro’s exclusive 12075 Open-edge Guardrail Brackets on rake-edges of any pitch and eave-edges under 4/12 pitch. Commonly used in conjunction with Acro’s proven 12070 Steep-pitch Guardrail Brackets along the eave-edges from 4/12 to 16/12, to form the backbone of a complete residential guardrail system. Two sets of 2 x 4's are used with a toe board to form a continuous guardrail around the entire roof...

The Guardian Fall Protection Residential Guardrail System is a specialized bracket and guardrail assembly intended for steep roofs of pitches from 6/12 to 16/12. This versatile and lightweight system is easy to install and remove, and is compact for convenient storage. Composed of powder-coated steel, it is designed for superior durability and weather resistance. 2x6” toeboards are required for use with the Residential Guardrail System, and must be installed according to equipment instruction...

For horizontal surfaces. Comes with base, post-holder and post. ACRO Flat Roof Guardrail #12060 For Horizontal Surfaces, Flat Roofs, and more. The ACRO Flat Roof Guardrail System model 12060 which targets low pitch roofs, including metal roofs. Unique to the system is the low profile attaching plate which is attached either by nails, bolts or screws. Even welding is an option. A connecting shoe and post are added to complete the system. Pre-cut 2 x 4 studs are used for cross rails. During...

The Guardian Fall Protection 15500“C-Slab Grabber” is an ideal solution for installing guardrails during concrete decking operations. With the C-Slab Grabber’s new backup safety cable (that keeps the systems from separating), quick adjust handle, and anti-slip tape, this product easily meets or exceeds OSHA’s safety standards. This product is fast and easy to set up and adjusts up to a 36-inch slab. The rails that can be used with this product include: 2 X 4’s, 2 X 6’s, or cable. With its...

The All-In-One railing base is the last base you will ever need to buy. You can install it on flat/low edges, over gravel stops, on parapet walls, and even on concrete slab overhangs. The standard version includes posts that accept RaptorRail metal rails. A wood option is available that comes fitted with brackets that can accept lumber rails or RaptorRail metal rails (metals rails still included with wood option)(Lumber is not included with wood option)(Standard version does NOT accept lumber...

Complying with OSHA 1926.502(b)(1) standards, Tie Down's Steep Slope Guardrail is engineered for top-tier safety on steep roofs. Crafted with meticulous attention to quality, this guardrail system combines high-grade materials made in the USA, ensuring exceptional corrosion resistance and long-lasting durability. Adaptability is at the core of this guardrail's design, offering five adjustable pitch positions ranging from 4/12 to 16/12. This versatility enables you to confidently work on a...

RACE Rail 2-In-1 Parapet and Flat Leading Edge Kit OSHA compliant leading edge fall protection system that can be used on both leading edge and a parapet wall. The RACE Rail Parapet/Leading Edge System can be easily installed by one person. The system can accommodate any parapet from 4” to 36” wide. The perimeter clamp can be installed on both flat edge and parapet wall construction. The perimeter clamp is clamped onto the vertical edge of a parapet wall. The RACE Rail System features a...

The Guardian Fall Protection “Universal Guardrail Posts” are designed to work along with Guardian’s other guardrail mounting options. These product are composed of lightweight welded steel and install easily. The maximum spacing between each post is 8' apart.

The VersaClamp Safety Guardrail is the most versatile guardrail C-Clamp in the marketplace for fall protection, and can be used on parapets and concrete slabs. Featuring a unique design, the compression plates are off-set so not to damage copings or flashings on parapets. With fast and easy installation, simply place the clamp over a parapet and slide the compression plate against the surface. Turn the compression rod against the plate and you are finished. Features:  8 ft. SpacingExpands...

The Guardian Fall Protection Guardrail Post is designed to be compatible with all Guardian guardrail mounting equipment. It is compatible with 2x4” boards and snap-on metal rails, is incredibly lightweight (only 4 pounds), and is 42 inches tall, keeping it exactly in line with current OSHA regulations. Guardrail Posts must be spaced at a maximum of 8 feet apart.Features: Designed to work with Residential Guardrail SystemEasy to installDesigned to work with Parapet Clamp Guardrail...

The All-In-One railing base is the last base you will ever need to buy. You can install it on flat/low edges, over gravel stops, on parapet walls, and even on concrete slab overhangs. The post can accept RaptorRail metal rails. The railing brackets can be adjusted vertically and rotated around the post, so setting up corners and strange geometries is simple. When you’re all done, the base and parapet clamp store in one convenient piece. Features: Flat/Low edgesGravel stopsParapet wallsConcrete...

This comprehensive package contains everything you need to establish a robust and secure fall protection system, eliminating the hassle of sourcing individual components. With this kit, you can swiftly and efficiently set up reliable fall protection, saving both time and effort. The ZipRail Complete Kit is designed for easy setup on various structures, whether it's parapet walls or flat roof edges. Its adaptable nature ensures that it can be configured to meet the specific requirements of your...

The All-In-One railing base is the last base you will ever need to buy. You can install it on flat/low edges, over gravel stops, on parapet walls, and even on concrete slab overhangs. The standard version includes posts that accept RaptorRail metal rails. A wood option is available that comes fitted with brackets that can accept lumber rails or RaptorRail metal rails (metal rails still included with wood option) (Lumber is not included with wood option)(Standard version does NOT...

The Leading Edge Safety RaptorRail™ 350′ Roofing Base Kit has the proper parts to cover an 80’x80′ building or 320-350 lineal feet of coverage in each kit. Complete rail system includes 36 posts, 36 railing feet and bases, 56 ten foot rails, 8 universal corner adapters, 4 small (29-43″) adjustable rails, 4 large (70″-120″) adjustable rails, and 4 extra large (120″-218″) adjustable rails. Also includes a RaptorRail™ crate specifically designed to provide organization for all parts of the...

The Universal Guardrail provides exceptional freedom of movement, allowing workers to perform their tasks without hindrance. Engineered to hold 11 Universal Guardrails and 12 Socket Bases on a reinforced metal rack, the Stack Rack Kit includes up to 110 linear feet of guardrail protection, depending on the kit purchased. With its ability to stack perfectly for either side loading of a flatbed or end loading for a closed trailer, the Stack Rack’s metal frame allows three bundles of guardrails...

The RaptorRail™ is designed and built to keep your workers safe while enhancing their productivity. It can be installed quickly and easily, yet is adaptable to virtually any situation. The RaptorRail™ crate and cart systems allow the components to be hoisted to the desired location in a single lift and be accessible at any location. The swiveling base allows finish work to the edge without removing the safety of the system. The base post and the parapet clamps have rubber pads to protect the...

Introducing the SafetyRail 2000FG Fiberglass Guardrail, the latest innovation in BlueWater's comprehensive range of fall protection guardrail systems. This patent-pending design utilizes fiberglass reinforced plastic (FRP), making it the perfect choice for rooftop safety in environments where telecommunication equipment is installed. Unlike traditional metal guardrails, which can interfere with radio frequency (RF) signals, the RF-transparent construction of the SafetyRail 2000FG ensures that...

BlueWater's SafetyRail 2000 Guardrails and Weighted Rail Base provide non-penetrating passive fall protection and fall prevention. These safety rails can be used either temporarily or permanently around roof edges, elevated platforms, and other high work areas that require safety railing and compliance with OSHA regulations. These roof safety rails are designed for easy setup and breakdown as a portable guardrail system. It can be assembled, disassembled, and transported between job sites on a...

BlueWater's SafetyRail 2000 Guardrails and Weighted Rail Base provide non-penetrating passive fall protection and fall prevention. These safety rails can be used either temporarily or permanently around roof edges, elevated platforms, and other high work areas that require safety railing and compliance with OSHA regulations. These roof safety rails are designed for easy setup and breakdown as a portable guardrail system. It can be assembled, disassembled, and transported between job sites...