OMG Roofing Products

OMG OlyVents are engineered to prolong the life of the roof system by reducing moisture within the roof system and trapped air pressure within the building. The one-way vent allows trapped air pressure to escape while the two-way breather, combined with the one-way vent, will help reduce moisture. Trapped air pressure and moisture can cause a reduction in thermal protection of the insulation and roof membrane system leading to roof deck damage. Available as either one-way vents or two-way...

For Retrofit Installations Includes a Cast Aluminum Clamping Ring One-piece seamless spun aluminum body, 12” long drain stem, 17 1/2” O.D. extra large drain flange with depressed sump area to facilitate water drainage from the roof surface Engineered to be installed without removing the existing plumbing or fixture The mechanical compression seal can be removed from the stem and can be used on a field cut stem to accommodate an elbow below the roof surface Simple and easy to install from the...

1/2"" to 1 1/2" Diameters - 1 1/2" Height Above Roof EPDM rubber base prevents damage to roof membranes Unique, one-piece, triangular design is engineered to shed water Will not deteriorate from water or sunlight exposure Wide platform base provides stability and balance

3/4" to 2" Diameters - 3 1/2" Height Above Roof EPDM rubber base prevents damage to roof membranes Unique, one-piece, triangular design is engineered to shed water Will not deteriorate from water or sunlight exposure Wide platform base provides stability and balance

Quick connectors helps set up your Adco Cart or Pace Carts a lot faster, saving you time and increasing productivity. It features an automatic flush to minimize costly or dangerous spillage. The main component & valves are made from polypropylene, molded gray & includes a stainless steel valve spring that is built to last. It’s simple to use, durable and economical. Features: 38mm Threaded or Snap-in fit neckUniversal Connection NSF/ANSI StandardHeight: 1.73” Length: 3.21”Tubing Size: ¾...

2 1/2"" to 5" Diameters - 3 1/2" Height Above Roof EPDM rubber base prevents damage to roof membranes Unique, one-piece, triangular design is engineered to shed water Will not deteriorate from water or sunlight exposure Wide platform base provides stability and balance ...

PaceCart Pump seal kit

The extra long screwdriver is fitted with a square socket tip (#2 Robertson) for tightening the special recess head screws on the U-Flow compression seals 12 ½” Shaft, includes a loss-prevention bar.

OMG OlyVents are engineered to prolong the life of the roof system by reducing moisture within the roof system and trapped air pressure within the building. The one-way vent allows trapped air pressure to escape while the two-way breather, combined with the one-way vent, will help reduce moisture. Trapped air pressure and moisture can cause a reduction in thermal protection of the insulation and roof membrane system leading to roof deck damage. Available as either one-way vents or two-way...

PaceCart2 Pump Shaft

Designed for existing through-wall/side-wall or scupper drainage pipes, the aluminum and stainless steel drain components provide durability and compatibility with single ply, BUR and modified bitumen roofing systems. A metal clamping assembly creates a compression type termination in both vertical and horizontal wall flashings. The Scupper RetroDrain features the patented RAC Backflow Compression Seal for attachment to PVC or cast iron leader pipes, and a removable drain strainer. Available...

The new and improved OB500SSGUN-SU18V Stand-up Power Applicator works with cartridges of OlyBond500 SpotShot Insulation Adhesive, OMG NightShot, as well as cartridges of the Fleece Membrane Adhesive that OMG supplies. The new power applicator is designed to help improve system productivity and performance by providing a more powerful 18 volt Lithium Ion Battery (LiB) that lasts up to 40% longer than the existing 14.4 volt NiCad battery. In addition, the new battery is 50% lighter, includes and...

OlyBond500 SpotShot is a fast-acting, dual-component, low-rise polyurethane foam adhesive designed to attach insulation to roof decks. SpotShot is dispensed through a portable 1:1 applicator and is perfect for crickets, smaller roofs, hard to reach areas, and repairs. SpotShot does not create any odors or noise that might disturb building occupants. Packaged in a box of (4), 1,500 ml cartridge sets.

3/4" to 2" Diameters - 6" Height Above Roof EPDM rubber base prevents damage to roof membranesUnique, one-piece, triangular design is engineered to shed water Will not deteriorate from water or sunlight exposure Wide platform base provides stability and balance*Item sold individually.

OMG Roofing Products not only provides the best insulation adhesvie in the industry, we also supply a large selection of innovative application equipment. All of our equipment is designed for the application of OlyBond500 insulation adhesive and is not compatible with other manufacturers' adhesives.

Incorporates the Patented RAC Backflow Compression Seal, Activated at Drain Flange Level (Requires any 7/16" wrench) For Retrofit Installations on TPO, includes a 17 1/2” TPO coated aluminum drain flange for direct hot air welding of membranes, RAC Backflow Compression Seal, and Aluminum Strainer. The 12” long drain stem is designed to bypass the existing drain bowl right to the water leader.

OMG has introduced a New RhinoBond tool with OptiWeld Technology, providing automatic calibration on membrane up to 80 mils. OptiWeld technology eliminates the calibration process by automatically monitoring the temperature of the RhinoBond Plate during the welding cycle to assure the best bond possible. This saves valuable time and labor for contractors the daily set-up process. Key Features: OptiWeld Technology automatically calibrates the tool to provide the correct amount of energy...

The new OMG PaceCart 3 offers a variety of benefits to contractors that make it more robust and easier to use. The PaceCart 3 provides the lowest installed cost method for applying OlyBond 500 insulation adhesives, and the fastest low-pressure application in the market. It features a 30 ft. hose for maximum reach and maneuverability on the roof. This unit is capable of dispensing enough OlyBond 500 to apply 60 squares of insulation per hour.Features:Improved Manifold:Ergonomically designed...

This lightweight, portable induction welder is designed for use welding RhinoBond Plates in hard to reach areas on the roof such as under rooftop equipment and on vertical surfaces. Based on patented Sinch Technology, the new stand-alone RhinoBond Hand Welder is ergonomically designed and has a vibrating handle feature and an indicator light to let users know when the tool is activated and when the weld cycle is complete. The base features a recessed centering design to help users properly...

PaceCart Conversion Kit for 15 Gallon Drums of OlyBond500 When it comes to applying rooftop insulation adhesives and fleece membrane, productivity is the name of the game. With this in mind, OMG offers a conversion Kit that enables contractors to apply OlyBond500 from 15 gallon drums (30 gallon sets) using existing PaceCart equipment. The Conversion Kit is compatible with PaceCart 2B and PaceCart 3 equipment and is easy-to-assemble and install. In addition, the Conversion Kit (patent pending)...

The Rhino Heat Sink Magnets are made with a proprietary polymer that provides improved thermal properties, allowing for a more efficient transfer of heat from a welded plate to the ambient air. After the Rhino Bond Tool has cycled and performed, this Heat Sink Magnet is placed over the weld for a maximum of 45 seconds to assure a strong bondMagnet Alignment: It is important that the alignment of the magnet completely covers the welded plate, mis-alignments may result in less than perfect...

The Height Adjustable Strut Model PipeGuard is ideal for applications that require support of single or multiple pipes at varying heights. It can be used for a wide range of small roof-top pipe applications including gas and refrigeration lines, electrical and solar conduit, HVAC lines and others. The Height Adjustable Strut Model PipeGuard also features a 10-inch long heavy duty EPDM rubber base and a galvanized strut channel that can be adjusted from 4 to 10 inches above the deck....

OlyBond500 Canisters are an easy-to-use, equipment free, option for applying OlyBond500 Adhesives. The Canisters have all of the same Factory Mutual approval ratings as our other OlyBond500 options, and can be used for securing both insulation and fleece backed membrane. Features & Benefits OlyBond500 Canisters offer fast start-up and shut down for improved rooftop productivity.OlyBond500 Canisters can provide up to 20% more coverage and up to 35 squares per set for insulation attachment,...

OMG AccuTrac Insulation Plates are made of Galvalume coated steel and designed exclusively for use with the stand-up AccuTrac and AccuTrac EZ installation tools. AccuTrac Plates are 3" (75mm) square and designed for use with specific OMG manufactured fasteners. 

The OlyFlow Strut Model PipeGuard is designed to support rooftop steel pipe, electric conduit, and copper tubing ranging in diameter from 1/2 to 5 inches at a height of 4 inches off of the roof surface. Its base is made from weather-resistant EPDM, which prevents damage to the roof system, while allowing for pipe expansion and contraction. The unique, one-piece, triangular design is engineered to shed water while its wide platform base provides stability and balance. The Strut Model features a...

1/2"" to 4" Diameters - 5" to 8 1/2" Height Above Roof Adjustable stainless steel support for quick installation EPDM rubber base prevents damage to roof membranes Unique, one-piece, triangular design is engineered to shed water Will not deteriorate from water or sunlight exposure Wide platform base provides stability and balance

Vortex Breaker Strainer Dome Get A Better Performing Drain! The OMG Vortex Breaker Strainer Dome is designed as a retrofit upgrade option for installed OMG Hercules and Aluminum Classic Drains. The new strainer has a built-in vortex breaker that helps to provide improved flow for better rooftop performance. When upgraded with the Vortex Breaker Strainer Dome, Hercules Drains offer up to 2.5 times greater water flow than the original Hercules Drains without a vortex breaker. Which means that...

Up to 6" Diameter - 4" Height Above Roof Model: Strut Height: 4" Width: 10" Max. Pipe Size: 6" Load Capacity: 1000 lbs. Made from 100% recycled polyethylene Compatible with all common roofing material Safety yellow identifies trip hazards Supports steel, PVC pipe, copper tubing, solar, electric, HVAC conduit and more....

Roof mount system for solar racking attachment and other rooftop applications. OMG PowerGrip™ PLUS is a commercial roof mount system designed to secure ballasted and rail-based solar racks and other equipment to buildings covered with any type of commercial roofing system. PowerGrip™ PLUS provides a secure connection directly to the roof deck or structural members. Once properly installed, PowerGrip™ PLUS virtually eliminates rack movement and remains watertight. FEATURES & BENEFITS properly...

RhinoTrac EZ is the newly redesigned stand-up tool for installing RhinoBond Plates on steel or wood roof decks. Contractors can simultaneously drop a RhinoBond plate and drive fasteners up to 8-inches long with RhinoTrac EZ to save time and manpower. 

PowerGrip™ Universal 11 (PGU-11) is one of the strongest anchors available for securing solar racks and other equipment to any type of commercial roofing system. PGU-11s provide a secure connection directly to the roof deck or structural members and are designed to reduce or eliminate ballast, so there’s less weight on the roof and less material handling. FEATURES & BENEFITS PowerGrip Universal 11 is compatible with every type of commercial roofing, and can be used on mechanically attached,...

Accutrac EZ is the newly redesigned stand-up tool for installing insulation on steel or wood roof decks with 3" square AccuTrac plates and certain OMG fasteners, up to 8-inches in length. AccuTrac EZ is ergonomically correct and can minimize operator fatigue by eliminating bending and twisting on the job. 

PowerGrip Universal 7 (PGU-7) is a smaller version of our PGU-11 roof anchor. PGU-7s provide a secure, watertight connection directly to the roof deck and are designed to reduce or eliminate ballast, so there’s less weight on the roof and less material handling. FEATURES & BENEFITS PowerGrip Universal 7 is compatible with every type of commercial roofing, and can be used on mechanically attached, fully adhered and ballasted roof systems.Helps protect roof covers from damage due to ballasted...

OMG O-Ring RetroDrains are designed for use in existing drain leaders smaller than 3-inches and larger than 6-inches. These drains feature four rubber O-rings to make a watertight seal. It's available with a U-Flow cast aluminum strainer dome and aluminum clamping ring. The most common sizes are the 2-inch and 8-inch, but other sizes available on a custom made basis. O-Ring RetroDrains are designed to replace existing drains in re-roofing applications. Installed from the roof surface, the...

OMG OlyBond500 Canister Kit Polyurethane Spray Foam Insulation Adhesive Self-Contained, Equipment-Free, Application Option OMG Roofing Adhesive Canister Kit, OlyBond500 Canisters are an equipment free, easy-to-use option for applying OlyBond500® Adhesives. OlyBond500 Canisters can provide up to 20% more coverage, up to 35 squares per set, depending on the conditions and insulation used. In addition, OlyBond500 Canisters enable users to spatter the adhesive for use with fleece backed membranes....

OMG's line of 3 through 6-inch SpeedTite Drains with built-in Vortex Breaker technology are designed for improved flow performance that rivals many traditional new connection drains. Available in 3-, 4-, 5- and 6-inch sizes to accommodate most rooftop drain conditions. SpeedTite Drains flow like traditional new connection roof drains. The flow performances help to get water - and dead load weight - off of the roof faster.The Vortex Breaker disrupts the slow draining effect of a vortex,...

OlyBond500 is a fast acting two component, low-rise polyurethane foam adhesive designed to adhere most insulation types to a wide selection of common roof decks and materials. OlyBond can be used in both New and Re-roofing applications, including applications that require multiple insulation layers. Features: Non-penetrating attachment systemOdor free – excellent for sensitive areas, such as schools, office buildings and hospitalsUltra low VOC meets all local and federal regulationsReduces...