MIRO Industries, Inc. and its founders and officers have accumulated years of experience in the roofing industry, including industrial and commercial roof inspection, analysis, and renovation design engineering. Their experience and expertise have caused MIRO Industries, Inc. to seek a solution to the common cause of roof failure and there is a solution...
MIRO Industries, Inc. produces various models of pipe and conduit Pillow Block Pipestands. The base of each pipestand is gently curved to prevent gouging and ripping the roof membrane. The pipestands are designed to absorb the friction from thermal expansion and contraction reducing the friction from pipe movement that normally damages the roof.
Products 1-22 of 22
Show
Aluminum pipe strap for moldel 1.5
Availability: In Stock
Item #: MIR-1.5 PIPESTRAP -
MIRO Industries pipe straps are designed to attach to MIRO Industries pipe supports to prevent pipe from coming out of or be displaced from the pipestand. All pipe straps ship separately and need to be installed on site. It is important to note that pipe guides should not be rigidly attached to the actual pipe that is placed in the pipe stand, thus allowing for expansion and contraction to occur within the pipe stand.Includes:#8 Stainless Steel ScrewsStrap material is a .040 aluminum 5052...
Aluminum pipe strap for moldel 1.5
Availability: In Stock
Item #: MIR-1.5 PIPESTRAP -
MIRO Industries pipe straps are designed to attach to MIRO Industries pipe supports to prevent pipe from coming out of or be displaced from the pipestand. All pipe straps ship separately and need to be installed on site. It is important to note that pipe guides should not be rigidly attached to the actual pipe that is placed in the pipe stand, thus allowing for expansion and contraction to occur within the pipe stand.Includes:#8 Stainless Steel ScrewsStrap material is a .040 aluminum 5052...
Aluminum pipe guides for model 3-R-2
Availability: In Stock
Item #: MIR-3-R-2 PIPESTRAP -
MIRO Industries pipe straps are designed to attach to MIRO Industries pipe supports to prevent pipe from coming out of or be displaced from the pipestand. All pipe straps ship separately and need to be installed on site. It is important to note that pipe guides should not be rigidly attached to the actual pipe that is placed in the pipe stand, thus allowing for expansion and contraction to occur within the pipe stand.Includes:#8 Stainless Steel ScrewsStrap material is a .040 aluminum 5052...
Aluminum pipe guides for model 3-R-2
Availability: In Stock
Item #: MIR-3-R-2 PIPESTRAP -
MIRO Industries pipe straps are designed to attach to MIRO Industries pipe supports to prevent pipe from coming out of or be displaced from the pipestand. All pipe straps ship separately and need to be installed on site. It is important to note that pipe guides should not be rigidly attached to the actual pipe that is placed in the pipe stand, thus allowing for expansion and contraction to occur within the pipe stand.Includes:#8 Stainless Steel ScrewsStrap material is a .040 aluminum 5052...
Aluminum pipe guides for model 3-R-4
Availability: In Stock
Item #: MIR-3-R-4 PIPESTRAP -
MIRO Industries pipe straps are designed to attach to MIRO Industries pipe supports to prevent pipe from coming out of or be displaced from the pipestand. All pipe straps ship separately and need to be installed on site. It is important to note that pipe guides should not be rigidly attached to the actual pipe that is placed in the pipe stand, thus allowing for expansion and contraction to occur within the pipe stand.Includes:#8 Stainless Steel ScrewsStrap material is a .040 aluminum 5052...
Aluminum pipe guides for model 3-R-4
Availability: In Stock
Item #: MIR-3-R-4 PIPESTRAP -
MIRO Industries pipe straps are designed to attach to MIRO Industries pipe supports to prevent pipe from coming out of or be displaced from the pipestand. All pipe straps ship separately and need to be installed on site. It is important to note that pipe guides should not be rigidly attached to the actual pipe that is placed in the pipe stand, thus allowing for expansion and contraction to occur within the pipe stand.Includes:#8 Stainless Steel ScrewsStrap material is a .040 aluminum 5052...
Clearance!
16 in. strut pipe support system used for ganging roof-mounted piping
Availability: In Stock
Item #: MIR-16-BS-12 -
A pipestand with a strut and clamp pipe support system used for ganging roof-mounted gas pipes, electrical conduit, solar piping and other mechanical piping. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest on a 16 in. length of strut which is mounted on the base. The pipes can then be fastened by using typical clamps locked to the strut.
16 in. strut pipe support system used for ganging roof-mounted piping
Availability: In Stock
Item #: MIR-16-BS-12 -
A pipestand with a strut and clamp pipe support system used for ganging roof-mounted gas pipes, electrical conduit, solar piping and other mechanical piping. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest on a 16 in. length of strut which is mounted on the base. The pipes can then be fastened by using typical clamps locked to the strut.
New!
8-bs-12
Availability: In Stock
Item #: MIR-8-BS-12 -
A pipe support with “strut” used to support roof-mounted electrical conduit, solar piping, gas pipes, and other mechanical piping. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest on a strut system which is made of hot-dip galvanized steel. The pipe support base is made of polycarbonate resin, and all other metal parts are made of hot-dip galvanized or stainless steel. Pipestand will accommodate up to 2.5″ pipe (inside...
8-bs-12
Availability: In Stock
Item #: MIR-8-BS-12 -
A pipe support with “strut” used to support roof-mounted electrical conduit, solar piping, gas pipes, and other mechanical piping. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest on a strut system which is made of hot-dip galvanized steel. The pipe support base is made of polycarbonate resin, and all other metal parts are made of hot-dip galvanized or stainless steel. Pipestand will accommodate up to 2.5″ pipe (inside...
A pipe stand that will accommodate up to 1.5? ID or smaller pipe
Availability: In Stock
Item #: MIR-1.5PS -
A pipe support used to support roof-mounted gas pipes, electrical conduit, solar piping and other mechanical piping. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest in a ‘U’ shaped cradle situated in a polycarbonate resin seat. Each pipe stand will accommodate up to 1.5″ inside diameter pipes. The maximum outside diameter of pipe which can be cradled in the Model 1.5 support is 1.9″.Base Material: Polycarbonate Size: The...
A pipe stand that will accommodate up to 1.5? ID or smaller pipe
Availability: In Stock
Item #: MIR-1.5PS -
A pipe support used to support roof-mounted gas pipes, electrical conduit, solar piping and other mechanical piping. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest in a ‘U’ shaped cradle situated in a polycarbonate resin seat. Each pipe stand will accommodate up to 1.5″ inside diameter pipes. The maximum outside diameter of pipe which can be cradled in the Model 1.5 support is 1.9″.Base Material: Polycarbonate Size: The...
3" ID or smaller pipe. Rod and pipes supported one pipestand high will have a 2.15” clearance above the roof.
Availability: In Stock
Item #: MIR-3-R-2 -
A "roller-bearing" pipe support used to support roof-mounted gas pipes, electrical conduit, solar piping and other mechanical piping. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest on a polycarbonate resin roller and a rod situated in a polycarbonate resin seat. Each pipestand will accommodate up to 3-3/4" outside diameter pipes.
3" ID or smaller pipe. Rod and pipes supported one pipestand high will have a 2.15” clearance above the roof.
Availability: In Stock
Item #: MIR-3-R-2 -
A "roller-bearing" pipe support used to support roof-mounted gas pipes, electrical conduit, solar piping and other mechanical piping. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest on a polycarbonate resin roller and a rod situated in a polycarbonate resin seat. Each pipestand will accommodate up to 3-3/4" outside diameter pipes.
3" ID or smaller pipe. Rod and pipes supported one pipestand high will have a 4” clearance above the roof.
Availability: In Stock
Item #: MIR-3-R-4 -
A "roller-bearing" pipe support used to support roof-mounted gas pipes, electrical conduit, solar piping and other mechanical piping. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest on a polycarbonate resin roller and a rod situated in a polycarbonate resin seat. Each pipestand will accommodate up to 3-3/4" outside diameter pipes.
3" ID or smaller pipe. Rod and pipes supported one pipestand high will have a 4” clearance above the roof.
Availability: In Stock
Item #: MIR-3-R-4 -
A "roller-bearing" pipe support used to support roof-mounted gas pipes, electrical conduit, solar piping and other mechanical piping. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest on a polycarbonate resin roller and a rod situated in a polycarbonate resin seat. Each pipestand will accommodate up to 3-3/4" outside diameter pipes.
Clearance!
Increased elevations for the 3-R-2 or the 3-R-4 pipestands
Availability: In Stock
Item #: MIR-3-R-SPACER -
The Model 3-R Spacer is 7.5 square and the base is gently rounded to prevent gouging the roof. The outer edges are raised 2" and increased elevations may be achieved by stacking Model 3-R-2 or 3-R-4 on 1 or 2 spacers, each with a height of 2". Four drainage ports are provided to prevent ponding within the device. The dimensional area resting on the roof is 7.5 inches square and 52.56 square inches exist of contact roof support
Increased elevations for the 3-R-2 or the 3-R-4 pipestands
Availability: In Stock
Item #: MIR-3-R-SPACER -
The Model 3-R Spacer is 7.5 square and the base is gently rounded to prevent gouging the roof. The outer edges are raised 2" and increased elevations may be achieved by stacking Model 3-R-2 or 3-R-4 on 1 or 2 spacers, each with a height of 2". Four drainage ports are provided to prevent ponding within the device. The dimensional area resting on the roof is 7.5 inches square and 52.56 square inches exist of contact roof support
For up to 3" ID and 3 3/4" OD pipe. Can adjust in height from 2 ¾” to 8” in elevation above the roof
Availability: In Stock
Item #: MIR-3-RAH-8 -
A "roller-bearing" pipe support used to support roof-mounted gas pipes, electrical conduit, solar piping and other mechanical piping. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest on a self-lubricating polycarbonate resin roller rod and roller. The pipe support base is made of polycarbonate resin, the supporting all-thread and all metal parts are made of stainless steel. Pipestand will accommodate up to 3" pipe (inside...
For up to 3" ID and 3 3/4" OD pipe. Can adjust in height from 2 ¾” to 8” in elevation above the roof
Availability: In Stock
Item #: MIR-3-RAH-8 -
A "roller-bearing" pipe support used to support roof-mounted gas pipes, electrical conduit, solar piping and other mechanical piping. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest on a self-lubricating polycarbonate resin roller rod and roller. The pipe support base is made of polycarbonate resin, the supporting all-thread and all metal parts are made of stainless steel. Pipestand will accommodate up to 3" pipe (inside...
For up to 3" ID and 3 3/4" OD pipe. Can adjust in height from 5 1/4” to 12” in elevation above the roof
Availability: In Stock
Item #: MIR-3-RAH-12 -
A "roller-bearing" pipe support used to support roof-mounted gas pipes, electrical conduit, solar piping and other mechanical piping. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest on a self-lubricating polycarbonate resin roller rod and roller. The pipe support base is made of polycarbonate resin, the supporting all-thread and all metal parts are made of stainless steel. Pipestand will accommodate up to 3" pipe (inside...
For up to 3" ID and 3 3/4" OD pipe. Can adjust in height from 5 1/4” to 12” in elevation above the roof
Availability: In Stock
Item #: MIR-3-RAH-12 -
A "roller-bearing" pipe support used to support roof-mounted gas pipes, electrical conduit, solar piping and other mechanical piping. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest on a self-lubricating polycarbonate resin roller rod and roller. The pipe support base is made of polycarbonate resin, the supporting all-thread and all metal parts are made of stainless steel. Pipestand will accommodate up to 3" pipe (inside...
For up to 4" ID and 4.5" OD pipe.
Availability: In Stock
Item #: MIR-4-RAH-10 -
A "roller-bearing" pipe support used to support roof-mounted gas pipes, electrical conduit, solar piping and other mechanical piping. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest on a self-lubricating polycarbonate resin roller rod and roller. The pipe support base is made of polycarbonate resin, the supporting all-thread and all metal parts are made of stainless steel. Pipestand will accommodate up to 4" pipe (inside...
For up to 4" ID and 4.5" OD pipe.
Availability: In Stock
Item #: MIR-4-RAH-10 -
A "roller-bearing" pipe support used to support roof-mounted gas pipes, electrical conduit, solar piping and other mechanical piping. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest on a self-lubricating polycarbonate resin roller rod and roller. The pipe support base is made of polycarbonate resin, the supporting all-thread and all metal parts are made of stainless steel. Pipestand will accommodate up to 4" pipe (inside...
For up to 4" ID and 4.5" OD pipe.
Availability: In Stock
Item #: MIR-4-RAH-14 -
A "roller-bearing" pipe support used to support roof-mounted gas pipes, electrical conduit, solar piping and other mechanical piping. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest on a self-lubricating polycarbonate resin roller rod and roller. The pipe support base is made of polycarbonate resin, the supporting all-thread and all metal parts are made of stainless steel. Pipestand will accommodate up to 4" pipe (inside...
For up to 4" ID and 4.5" OD pipe.
Availability: In Stock
Item #: MIR-4-RAH-14 -
A "roller-bearing" pipe support used to support roof-mounted gas pipes, electrical conduit, solar piping and other mechanical piping. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest on a self-lubricating polycarbonate resin roller rod and roller. The pipe support base is made of polycarbonate resin, the supporting all-thread and all metal parts are made of stainless steel. Pipestand will accommodate up to 4" pipe (inside...
For up to 5" ID and 6" OD pipe. Can adjust in height from 2 3/4” to 8” in elevation above the roof
Availability: In Stock
Item #: MIR-5-RAH-8 -
The 5-RAH-7 has Replaced the 4-RAH-7 / A "roller-bearing" pipe support used to support roof-mounted gas pipes, electrical conduit, solar piping and other mechanical piping. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest on a self-lubricating roller which is made of a stainless steel rod and a sturdy polycarbonate resin roller. The pipe support base is made of polycarbonate plastic and all metal parts are made of...
For up to 5" ID and 6" OD pipe. Can adjust in height from 2 3/4” to 8” in elevation above the roof
Availability: In Stock
Item #: MIR-5-RAH-8 -
The 5-RAH-7 has Replaced the 4-RAH-7 / A "roller-bearing" pipe support used to support roof-mounted gas pipes, electrical conduit, solar piping and other mechanical piping. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest on a self-lubricating roller which is made of a stainless steel rod and a sturdy polycarbonate resin roller. The pipe support base is made of polycarbonate plastic and all metal parts are made of...
For up to 5" ID and 6" OD pipe. Can adjust in height from 2 3/4” to 12” in elevation above the roof
Availability: In Stock
Item #: MIR-5-RAH-12 -
The 5-RAH-12 has Replaced the 4-RAH-12 / A "roller-bearing" pipe support used to support roof-mounted gas pipes, electrical conduit, solar piping and other mechanical piping. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest on a self-lubricating roller which is made of a stainless steel rod and a sturdy polycarbonate resin roller. The pipe support base is made of polycarbonate plastic and all metal parts are made of...
For up to 5" ID and 6" OD pipe. Can adjust in height from 2 3/4” to 12” in elevation above the roof
Availability: In Stock
Item #: MIR-5-RAH-12 -
The 5-RAH-12 has Replaced the 4-RAH-12 / A "roller-bearing" pipe support used to support roof-mounted gas pipes, electrical conduit, solar piping and other mechanical piping. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest on a self-lubricating roller which is made of a stainless steel rod and a sturdy polycarbonate resin roller. The pipe support base is made of polycarbonate plastic and all metal parts are made of...
Clearance!
For up to 6" ID and 8.5" OD pipe. Can adjust in height from 4” to 8” in elevation above the roof
Availability: In Stock
Item #: MIR-6-RAH-8 -
A "roller bearing" pipe support used to support roof mounted gas pipes, electrical conduit, solar piping and other mechanical piping. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest on a self-lubricating roller which is a 304 stainless steel rod and a polycarbonate resin roller. The pipe support base is made of sturdy polycarbonate resin, the roller is polycarbonate and all metal parts are made of stainless steel....
For up to 6" ID and 8.5" OD pipe. Can adjust in height from 4” to 8” in elevation above the roof
Availability: In Stock
Item #: MIR-6-RAH-8 -
A "roller bearing" pipe support used to support roof mounted gas pipes, electrical conduit, solar piping and other mechanical piping. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest on a self-lubricating roller which is a 304 stainless steel rod and a polycarbonate resin roller. The pipe support base is made of sturdy polycarbonate resin, the roller is polycarbonate and all metal parts are made of stainless steel....
Clearance!
For up to 6" ID and 8.5" OD pipe. Can adjust in height from 4” to 12” in elevation above the roof
Availability: In Stock
Item #: MIR-6-RAH-12 -
A "roller bearing" pipe support used to support roof mounted gas pipes, electrical conduit, solar piping and other mechanical piping. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest on a self-lubricating roller which is a 304 stainless steel rod and a polycarbonate resin roller. The pipe support base is made of sturdy polycarbonate resin, the roller is polycarbonate and all metal parts are made of stainless steel....
For up to 6" ID and 8.5" OD pipe. Can adjust in height from 4” to 12” in elevation above the roof
Availability: In Stock
Item #: MIR-6-RAH-12 -
A "roller bearing" pipe support used to support roof mounted gas pipes, electrical conduit, solar piping and other mechanical piping. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest on a self-lubricating roller which is a 304 stainless steel rod and a polycarbonate resin roller. The pipe support base is made of sturdy polycarbonate resin, the roller is polycarbonate and all metal parts are made of stainless steel....
Slip resistant pad designed with small lip to hold support to the pad and reduces movement on the rooftop
Availability: In Stock
Item #: MIR-SP-7X10 -
Miro Industries custom support pad, designed specifically to fit the Miro Non-Penetrating supports, while protecting the rooftop envelope. The Slip Resistant pads is features a small lip that holds the support to the pad and reduces movement on the rooftop. The holes on the pad saves weight, allows for venting and drainage. Made from a Heat mold process, using 100% recycled RubberMiro Support Pad ...
Slip resistant pad designed with small lip to hold support to the pad and reduces movement on the rooftop
Availability: In Stock
Item #: MIR-SP-7X10 -
Miro Industries custom support pad, designed specifically to fit the Miro Non-Penetrating supports, while protecting the rooftop envelope. The Slip Resistant pads is features a small lip that holds the support to the pad and reduces movement on the rooftop. The holes on the pad saves weight, allows for venting and drainage. Made from a Heat mold process, using 100% recycled RubberMiro Support Pad ...
Slip resistant pad designed with small lip to hold support to the pad and reduces movement on the rooftop
Availability: In Stock
Item #: MIR-SP-9X15 -
Miro Industries custom support pad, designed specifically to fit the Miro Non-Penetrating supports, while protecting the rooftop envelope. The Slip Resistant pads is features a small lip that holds the support to the pad and reduces movement on the rooftop. The holes on the pad saves weight, allows for venting and drainage. Made from a Heat mold process, using 100% recycled RubberMiro Support Pad ...
Slip resistant pad designed with small lip to hold support to the pad and reduces movement on the rooftop
Availability: In Stock
Item #: MIR-SP-9X15 -
Miro Industries custom support pad, designed specifically to fit the Miro Non-Penetrating supports, while protecting the rooftop envelope. The Slip Resistant pads is features a small lip that holds the support to the pad and reduces movement on the rooftop. The holes on the pad saves weight, allows for venting and drainage. Made from a Heat mold process, using 100% recycled RubberMiro Support Pad ...
Slip resistant pad designed with small lip to hold support to the pad and reduces movement on the rooftop
Availability: In Stock
Item #: MIR-SP-16X18 -
Miro Industries custom support pad, designed specifically to fit the Miro Non-Penetrating supports, while protecting the rooftop envelope. The Slip Resistant pads is features a small lip that holds the support to the pad and reduces movement on the rooftop. The holes on the pad saves weight, allows for venting and drainage. Made from a Heat mold process, using 100% recycled RubberMiro Support Pad ...
Slip resistant pad designed with small lip to hold support to the pad and reduces movement on the rooftop
Availability: In Stock
Item #: MIR-SP-16X18 -
Miro Industries custom support pad, designed specifically to fit the Miro Non-Penetrating supports, while protecting the rooftop envelope. The Slip Resistant pads is features a small lip that holds the support to the pad and reduces movement on the rooftop. The holes on the pad saves weight, allows for venting and drainage. Made from a Heat mold process, using 100% recycled RubberMiro Support Pad ...
Slip resistant pad designed with small lip to hold support to the pad and reduces movement on the rooftop
Availability: In Stock
Item #: MIR-SP-19X23 -
Miro Industries custom support pad, designed specifically to fit the Miro Non-Penetrating supports, while protecting the rooftop envelope. The Slip Resistant pads is features a small lip that holds the support to the pad and reduces movement on the rooftop. The holes on the pad saves weight, allows for venting and drainage. Made from a Heat mold process, using 100% recycled RubberMiro Support Pad ...
Slip resistant pad designed with small lip to hold support to the pad and reduces movement on the rooftop
Availability: In Stock
Item #: MIR-SP-19X23 -
Miro Industries custom support pad, designed specifically to fit the Miro Non-Penetrating supports, while protecting the rooftop envelope. The Slip Resistant pads is features a small lip that holds the support to the pad and reduces movement on the rooftop. The holes on the pad saves weight, allows for venting and drainage. Made from a Heat mold process, using 100% recycled RubberMiro Support Pad ...
Ships Free!
Sold in 3 ft. Sections / Designed to be Cutdown / Recycled
Availability: In Stock
Item #: MIR-RSS3 -
Economical, Recycled PVC Design for Easy Rooftop Conduit and Condensate Pipe Support 3 1/2” high x 3’ long. Designed to be cut down to a length of 6” or longer Individual support pieces cannot be less than 6” Maximum Pipe Clearance 3 1/2" Maximum load not to exceed 50 lbs per 6” Spacing should not exceed 10’ on center 100% recycled PVC / Color: White Pipe should be clamped loosely by a pipe clamp or pipe guide ...
Sold in 3 ft. Sections / Designed to be Cutdown / Recycled
Availability: In Stock
Item #: MIR-RSS3 -
Economical, Recycled PVC Design for Easy Rooftop Conduit and Condensate Pipe Support 3 1/2” high x 3’ long. Designed to be cut down to a length of 6” or longer Individual support pieces cannot be less than 6” Maximum Pipe Clearance 3 1/2" Maximum load not to exceed 50 lbs per 6” Spacing should not exceed 10’ on center 100% recycled PVC / Color: White Pipe should be clamped loosely by a pipe clamp or pipe guide ...