Malco Snips and Cutters

The Malco TurboShear Heavy Duty (TSHD) is a powerful sheet metal cutting tool that can be quickly attached to a corded or cordless drill. This electric shear attachment has the capability to make fast straight, curved, or square cuts in most common sheet metals. The shear’s wide-opening jaws can operate at high or low speeds for the control you need, when you need it. With Malco’s TSHD Sheet Metal Cutter, you are able to easily: Follow a precise trim lineNavigate crosscuts through profiles of...

Get a better grip with Malco’s AV Aviation Snips! Malco’s AV Aviation Snips feature POWER-FIT™ performance hand grips that increase productivity and distributes pressure evenly, which results in less user fatigue. Non-slip grooves and safety guards also help users achieve a Maximum grip in some of the dirtiest conditions. An easy release side latch offers quick operation and cutting on the job. Made with only the best, the hardened forged steel jaws offer a strong long lasting cutting edge....

Get a better grip with Malco’s AV Aviation Snips! Malco’s AV Aviation Snips feature POWER-FIT™ performance hand grips that increase productivity and distributes pressure evenly, which results in less user fatigue. Non-slip grooves and safety guards also help users achieve a Maximum grip in some of the dirtiest conditions. An easy release side latch offers quick operation and cutting on the job. Made with only the best, the hardened forged steel jaws offer a strong long lasting cutting edge....

Malco’s Max2000 Aviation Snips are made in the USA and available in left, right, and combination cutting options. These snips feature Euro-styled ergonomic handles. Textured, solid-colored, molded thermoplastic grips and finger stops compliment a narrow handle opening to fit large or small hands. An ambidextrous, thumb-operated handle latch and replaceable compression spring complete this user-friendly design. All of Malco’s Max2000 Aviation Snips feature superior hardened blade edges for...

The time-saving TURBOSHEAR Model No. TS1 inserts directly into the chuck of a standard 1200 rpm A/C or cordless drill. It’s that easy to convert your power drill to a power shear! This rugged but inexpensive accessory cuts straight and to the left and is capable of navigating tight curved patterns and squares in heavy 20-gauge (1.02 mm) galvanized steel. Blind cuts require only a 1/2”(12.7 mm) starting hole. Cutting applications include both ferrous and non-ferrous sheet metals, metal...

Make your power drill a powerful slate-cutting shear! This one-hand operation accessory quickly inserts into the chuck of a corded or cordless electric drill and requires less force than other slate-cutting methods. Smooth, easy one-hand operation always leaves a free hand to steady the work when making cuts on a bench or rooftop. An operating speed of 1400 to 2000 RPM ensures optimal performance and control for making fast straight, angled or curved cuts in 4mm to 8mm natural roofing slate....

Cutting corrugated metal roofing is easier with Malco’s TSCM TurboShear. This attachable shear works better and faster than manual metal roofing shears. The Malco TSCM makes easy cross cuts, fast lengthwise cuts, and precise circular and square outlet cuts. Corrugated metal roofing and common trapezoidal (box) pattern metal roofing panels, can easily be cut with the TSCM. The Elongated blades are made with compact jaws to create a steep 75° offset so that the drill is held at a nearly vertical...

Malco’s Max2000 Aviation Snips are made in the USA and available in left, right, and combination cutting options. These snips feature Euro-styled ergonomic handles. Textured, solid-colored, molded thermoplastic grips and finger stops compliment a narrow handle opening to fit large or small hands. An ambidextrous, thumb-operated handle latch and replaceable compression spring complete this user-friendly design. All of Malco’s Max2000 Aviation Snips feature superior hardened blade edges for...

Get a better grip with Malco’s AV Aviation Snips! Malco’s AV Aviation Snips feature POWER-FIT™ performance hand grips that increase productivity and distributes pressure evenly, which results in less user fatigue. Non-slip grooves and safety guards also help users achieve a Maximum grip in some of the dirtiest conditions. An easy release side latch offers quick operation and cutting on the job. Made with only the best, the hardened forged steel jaws offer a strong long lasting cutting edge....

The forged steel jaws of these left-cutting or right -cutting snips are set at a 90-degree angle to allow easy gripping when cutting sheet metal in tight spaces or overhead. The operator can follow tight circular or square pattern left or right cuts with either a pushing or pulling motion. A serrated edge on the upper jaw and compound head-to-handle linkage provide powerful, non-slip leverage for cutting up to 24-gauge (0.61 mm) cold rolled steel or 28-gauge (0.38 mm) stainless. Handles...

Get a better grip with Malco’s AV Aviation Snips! Malco’s AV Aviation Snips feature POWER-FIT™ performance hand grips that increase productivity and distributes pressure evenly, which results in less user fatigue. Non-slip grooves and safety guards also help users achieve a Maximum grip in some of the dirtiest conditions. An easy release side latch offers quick operation and cutting on the job. Made with only the best, the hardened forged steel jaws offer a strong long lasting cutting edge....

Replacement blade for Turboshear - TSHD

Malco’s Max2000 Aviation Snips are made in the USA and available in left, right, and combination cutting options. These snips feature Euro-styled ergonomic handles. Textured, solid-colored, molded thermoplastic grips and finger stops compliment a narrow handle opening to fit large or small hands. An ambidextrous, thumb-operated handle latch and replaceable compression spring complete this user-friendly design. All of Malco’s Max2000 Aviation Snips feature superior hardened blade edges for...

Malco’s Asphalt Shingle Cutter quickly attaches to a corded or cordless drill to Make fast, clean, trim cuts in asphalt shingles along a roof valley, or tight left square cuts and circles to fit around utility outlets. An extra-wide jaw opening with beveled lead-in tip on the upper blade accommodates multiple shingle layers. A wide, flat, lower blade offers exceptional operator control. The cutting blades are made with heat-treated carbon steel, with solid carbide inserts, which hold their...

Get a better grip with Malco’s AV Aviation Snips! Malco’s AV Aviation Snips feature POWER-FIT™ performance hand grips that increase productivity and distributes pressure evenly, which results in less user fatigue. Non-slip grooves and safety guards also help users achieve a Maximum grip in some of the dirtiest conditions. An easy release side latch offers quick operation and cutting on the job. Made with only the best, the hardened forged steel jaws offer a strong long lasting cutting edge....

Replacement Blades for TSS1 and TSS1A TurboShear

With an overall length of only 7-1/8 inches (181 mm), the AVsMini easily goes to work in tight or awkward spaces where full-size aviation snips are challenged. A 3/4 inch (19 mm) length of cut provides the optimum speed for confined cutting applications where this small, maneuverable snip excels. Each snip is made with forged steel jaws that contain precision-ground serrations on the lower blade, which produces a sharply defined edge for cutting accuracy and control. The AVsMini AVM6 left...

With an overall length of only 7-1/8 inches (181 mm), the AVsMini easily goes to work in tight or awkward spaces where full-size aviation snips are challenged. A 3/4 inch (19 mm) length of cut provides the optimum speed for confined cutting applications where this small, maneuverable snip excels. Each snip is made with forged steel jaws that contain precision-ground serrations on the lower blade, which produces a sharply defined edge for cutting accuracy and control. The AVsMini AVM6 left...

Malco’s Max2000 Aviation Snips are made in the USA and available in left, right, and combination cutting options. These snips feature Euro-styled ergonomic handles. Textured, solid-colored, molded thermoplastic grips and finger stops compliment a narrow handle opening to fit large or small hands. An ambidextrous, thumb-operated handle latch and replaceable compression spring complete this user-friendly design. All of Malco’s Max2000 Aviation Snips feature superior hardened blade edges for...

Sleek styling, easy blade replacement and larger handles make the Andy™ Snip more versatile. A sleek head design improves maneuverability. Ideal for making cuts in tight material, shapes such as J-Channel. A full 3-1/4" (82.6 mm) cutting length makes straight shearing with the Malco Andy™ Snip fast and easy. Blade replacement is easily accomplished in the field. Features: Original Andy Classic Style handle loops.Sleek Head Design Improves Maneuverability.Full 3″ (76.2 mm) Cutting Length – 12″. ...

The MD12 Circular Duckbill Snips maneuver and cut easily to the very tip of the blade. It cuts sheet metal, aluminum and steel siding, plastics and other thin materials without tearing or catching. Forged steel snips offer a powerful cutSnips work great for straight, curved, or notched cutsManeuverable cuts that go straight to the tip of the blade

Follow Tight Circular or Square Pattern Cuts with a Pushing or Pulling Motion The forged steel jaws of these left-cutting or right -cutting snips are set at a 90-degree angle to allow easy gripping when cutting sheet metal in tight spaces or overhead. The operator can follow tight circular or square pattern left or right cuts with either a pushing or pulling motion. A serrated edge on the upper jaw and compound head-to-handle linkage provide powerful, non-slip leverage for cutting up to...

Replacement Blade for TurboShear

Sleek styling, easy blade replacement and larger handles make the Andy™ Snip more versatile. A sleek head design improves maneuverability. Ideal for making cuts in tight material, shapes such as J-Channel. A full 3" (76.2 mm) cutting length makes straight shearing with the Malco Andy™ Snip fast and easy. Blade replacement is easily accomplished in the field. Features: Larger Handle LoopsSleek Head Design Improves ManeuverabilityFull 3" (76.2 mm) Cutting LengthPressure-fit Inset Blades ...

Malco’s 12″ Gripped Andy Snip’s features the same design and cutting power of other Andy Snip models but with added handle comfort. Grips add better comfort, fit, and control over other models. All Andy Snips are ideal for cutting vinyl siding, aluminum, copper, or sheet metal. The sleek head design improves maneuverability making it easier to cut materials such as J-Channel. A full 3″ (76.2 mm) cutting length makes straight shearing with the Malco Andy™ Snip fast and easy. Pressure-fit inset...

Cut through heavy vinyl siding lockseams and more with ease! The MV12 Aluminum Handled Snip is part of the legendary ANDY SNIP line of "lightweight snips with the strength of steel". This unique Andy combination snip design features a knife-like cutting edge to produce a smooth slicing action for easy one-hand operation. The user simply grasps the snip with the red grip up for optimal blade alignment when making straight cuts or left or right circular cuts in a variety of non-ferrous materials...

Sleek styling, easy blade replacement and larger handles make the Andy™ Snip more versatile. A sleek head design improves maneuverability. Ideal for making cuts in tight material, shapes such as J-Channel. A full 3-1/4" (82.6 mm) cutting length makes straight shearing with the Malco Andy™ Snip fast and easy. Blade replacement is easily accomplished in the field. Features: Larger Handle LoopsSleek Head Design Improves ManeuverabilityFull 3-1/4" (82.6 mm) Cutting Length ...

Converts TS1 TurboShear for one hand use. Fits most 1200 rpm or larger A/C or cordless drills.A sleek, lightweight aluminum-cast shear head and compact molded polymer patented drill clamp allow maximum portability and ease. The telescoping drill clamp adjusts to fit both length and width of popular drill sizes including smaller bodied impact drivers. The attachment clamp offers optional spacers for large motor housings for better adjustment of the tool to the drill. The clamp collar allows the...

Use the powerful assistance of your drill to make fast straight cuts, left circles and squares in all popular vinyl siding styles. A knife-like beveled blade edge and easy scissor action quickly penetrates vinyl siding to start cut. Non-slip bite and 3/8 in. jaw opening tackles the lock-seam edge of siding with ease. The wide opening jaws combined with a 3/4 in. cutting length make easy work of cutting through profiles. Malco Viny-cutting TurboShears operate at high or low speeds for the...

Sleek styling, easy blade replacement and larger handles make the Andy™ Snip more versatile. A sleek head design improves maneuverability. Ideal for making cuts in tight material, shapes such as J-Channel. A full 3" (76.2 mm) cutting length makes straight shearing with the Malco Andy™ Snip fast and easy. Blade replacement is easily accomplished in the field. Features: Larger Handle LoopsSleek Head Design Improves ManeuverabilityFull 3" (76.2 mm) Cutting LengthPressure-fit Inset Blades ...

Replacement blades for Malco TurboShear Slate Cutting Drill Attachment