The late Jack McMullen was the founder and inventor of the first polycarbonate snow guard in 1976. He invented and patented the product out of necessity for his own metal building business. Growing tired of receive complaints when the metal snow guards he installed would rust, break and leave stains on the roof, he thought of a better solution, thus the SnoBlox / Snojax product line was born.
Products 1-3 of 3
Show
Made in America!
Availability: In Stock
Item #: SB-DEUCE -
The American made SnoBlox Deuce has revolutionized the polycarbonate snow guard industry with its low profile forward mounted 2.5" high face and its sleek 1.5" wide waffled tapered back base that fits most roof panels without rib straddling. This patented product has stood the test of time and is an aesthetically appealing, low cost solution to the problem of sliding snow and ice on metal roofing. It's mounting versatility allows it to be mechanically attached on screw down roofs with a 1.5"...
Made in America!
Availability: In Stock
Item #: SB-DEUCE -
The American made SnoBlox Deuce has revolutionized the polycarbonate snow guard industry with its low profile forward mounted 2.5" high face and its sleek 1.5" wide waffled tapered back base that fits most roof panels without rib straddling. This patented product has stood the test of time and is an aesthetically appealing, low cost solution to the problem of sliding snow and ice on metal roofing. It's mounting versatility allows it to be mechanically attached on screw down roofs with a 1.5"...
The official snow guard adhesive of SnoBlox-Snojax!
Availability: In Stock
Item #: SB-SB-190 -
SureBond SB-190 is the official snow guard adhesive of SnoBlox-Snojax. We pioneered the use of this adhesive with our polycarbonate snow guards over 25 years ago and now it has become the standard in the industry. For a successful installation the adhesive requires 28 days or (672 Hours) at 50 Degrees (F) or above to achieve full cure. Temperatures below 40 Degrees (F) will delay cure time, until temperatures reach 50 Degrees (F) or above to completely cure. Spring, Summer or early Fall is the...
The official snow guard adhesive of SnoBlox-Snojax!
Availability: In Stock
Item #: SB-SB-190 -
SureBond SB-190 is the official snow guard adhesive of SnoBlox-Snojax. We pioneered the use of this adhesive with our polycarbonate snow guards over 25 years ago and now it has become the standard in the industry. For a successful installation the adhesive requires 28 days or (672 Hours) at 50 Degrees (F) or above to achieve full cure. Temperatures below 40 Degrees (F) will delay cure time, until temperatures reach 50 Degrees (F) or above to completely cure. Spring, Summer or early Fall is the...
These screws are designed to attach SnoBlox - SnoJax snow guards
Availability: In Stock
Item #: SB-SCREW -
#14 Wood Purlin Snow Guard Screws These are #14, self-tapping snow guard screw that is 2 inches long with an attached neoprene washer. They are made from case hardened carbon steel construction with an anti-corrosion protective coating. They measure 1/4 - 14 X 2" Teks/3 screws feature a pre-threaded bonded washer and a 3/8” high hex washer head. This screw is design for snow guard attachment into wood purlins or wood substrates at least 2" thick. #14 Metal Purline Snow Guard Screws These are...
These screws are designed to attach SnoBlox - SnoJax snow guards
Availability: In Stock
Item #: SB-SCREW -
#14 Wood Purlin Snow Guard Screws These are #14, self-tapping snow guard screw that is 2 inches long with an attached neoprene washer. They are made from case hardened carbon steel construction with an anti-corrosion protective coating. They measure 1/4 - 14 X 2" Teks/3 screws feature a pre-threaded bonded washer and a 3/8” high hex washer head. This screw is design for snow guard attachment into wood purlins or wood substrates at least 2" thick. #14 Metal Purline Snow Guard Screws These are...