Shingle Eater, Inc. is a manufacturer of high-quality tools for the roofing and siding industry. The company was founded by a group of contractors who recognized the need for an ergonomically designed roofing tool. Their first prototype was developed and brought to market in 1981. Being contractors themselves, the developers wanted to manufacture a tool with contractors' best interests in mind. The Shingle Eater was intended to get roofing projects completed efficiently and with the least amount of stress on the body.
Products 1-7 of 7
Show
55" length; 10 Teeth, General Purpose tear-off
Availability: In Stock
Item #: 157-1010 -
55" length, 10 Teeth, General Purpose Tear-Off The Original Shingle Eater offers the best ergonomic design on the market, saving your back, time, and energy. Our rugged tools are designed to handle the demands of your asphalt roofing tear off projects. At roughly 7.4 lbs, this tool is lightweight. The 10" wide footplate allows you to snag 2 nails with each swipe, enabling a more efficient tear off. Regardless of your position (stand,sit, kneel), the 55" handle accommodates most conventional...
55" length; 10 Teeth, General Purpose tear-off
Availability: In Stock
Item #: 157-1010 -
55" length, 10 Teeth, General Purpose Tear-Off The Original Shingle Eater offers the best ergonomic design on the market, saving your back, time, and energy. Our rugged tools are designed to handle the demands of your asphalt roofing tear off projects. At roughly 7.4 lbs, this tool is lightweight. The 10" wide footplate allows you to snag 2 nails with each swipe, enabling a more efficient tear off. Regardless of your position (stand,sit, kneel), the 55" handle accommodates most conventional...
46.5" length; 10 teeth for Steeper Pitched Roofs and men under 6 feet
Availability: In Stock
Item #: 157-1025 -
46.5" length, 10 teeth for Steeper Pitched Roofs and Men Under 6 feetDesigned specifically for Steeper Pitched Roofs and Roofers under 6 feet. Same 10" wide footplate as "The Original" that wears evenly, grabbing 2 nails with each swipe so you don't have to go back over the roof with a hammer to pull out nails. Accommodates all conventional asphalt tear-offs. OSHA Safety Yellow. 100% American Made.
46.5" length; 10 teeth for Steeper Pitched Roofs and men under 6 feet
Availability: In Stock
Item #: 157-1025 -
46.5" length, 10 teeth for Steeper Pitched Roofs and Men Under 6 feetDesigned specifically for Steeper Pitched Roofs and Roofers under 6 feet. Same 10" wide footplate as "The Original" that wears evenly, grabbing 2 nails with each swipe so you don't have to go back over the roof with a hammer to pull out nails. Accommodates all conventional asphalt tear-offs. OSHA Safety Yellow. 100% American Made.
36.5" length; 7 Teeth for Steep and Hard To Work Areas. Between peaks, gutters & downspouts
Availability: In Stock
Item #: 157-1027 -
36.5" length, 7 Teeth for Steep and Hard To Work AreasIf you're working on a small garage, a steep peak, or difficult areas near the ridge or edge or between peaks, the smaller 7" footplate is often easier to manipulate. This tool also works well for removing gutters and downspouts. Still has the beveled teeth and corrugations on the footplate, but the shorter handle and longer, narrower foot are more easily used for specialty tear-offs. OSHA Safety Yellow. 100% American Made. ...
36.5" length; 7 Teeth for Steep and Hard To Work Areas. Between peaks, gutters & downspouts
Availability: In Stock
Item #: 157-1027 -
36.5" length, 7 Teeth for Steep and Hard To Work AreasIf you're working on a small garage, a steep peak, or difficult areas near the ridge or edge or between peaks, the smaller 7" footplate is often easier to manipulate. This tool also works well for removing gutters and downspouts. Still has the beveled teeth and corrugations on the footplate, but the shorter handle and longer, narrower foot are more easily used for specialty tear-offs. OSHA Safety Yellow. 100% American Made. ...
23" Length, 4 teeth "Shorty" for Flashing and Tight areas, Around Skylights. 3 lbs. fits in toolbelt
Availability: In Stock
Item #: 157-1030 -
23" Length, 4 teeth for Flashing and Tight areas, Around SkylightsThe Shingle Eater Junior is recommended for for roofing renovation in tight areas around skylights or chimneys, valleys where peaks meet. Lightweight, durable, high quality steel. It is lightweight, easy to use while up on a ladder ripping off gutters or flashing. The Junior is our second best-selling tool, used for roofing renovation, remodeling. OSHA Safety Yellow. 100% American Made.
23" Length, 4 teeth "Shorty" for Flashing and Tight areas, Around Skylights. 3 lbs. fits in toolbelt
Availability: In Stock
Item #: 157-1030 -
23" Length, 4 teeth for Flashing and Tight areas, Around SkylightsThe Shingle Eater Junior is recommended for for roofing renovation in tight areas around skylights or chimneys, valleys where peaks meet. Lightweight, durable, high quality steel. It is lightweight, easy to use while up on a ladder ripping off gutters or flashing. The Junior is our second best-selling tool, used for roofing renovation, remodeling. OSHA Safety Yellow. 100% American Made.
46.5" length, 10" Footplate. Steel D-Handle
Availability: In Stock
Item #: 157-1028 -
46.5" length, 10" Footplate, General Purpose Tool This version most closely resembles the 6127 tool, a better length for roofers under 6 feet. The entire D handle is made of steel, easy for gripping, and adds only about 1/2 lb to the overall weight of the tool. It is well-balanced and will slide easily under shingles. Smooth finish, no sharp angles, and comfortable. We worked for over 2 years to get the design right on the D Handle, and so far, roofers have been impressed with our workmanship....
46.5" length, 10" Footplate. Steel D-Handle
Availability: In Stock
Item #: 157-1028 -
46.5" length, 10" Footplate, General Purpose Tool This version most closely resembles the 6127 tool, a better length for roofers under 6 feet. The entire D handle is made of steel, easy for gripping, and adds only about 1/2 lb to the overall weight of the tool. It is well-balanced and will slide easily under shingles. Smooth finish, no sharp angles, and comfortable. We worked for over 2 years to get the design right on the D Handle, and so far, roofers have been impressed with our workmanship....
D handle is over 6" wide for big hands.
Availability: In Stock
Item #: 157-1048 -
Our customers are growing attached to the D handled version of our 6127 tool, and we've had multiple requests for a Demo Eater D handled. We're introducing the 8130 D handled version of the 8126 tool. They are individually made, so lengths may vary up to 1".Because of our product improvements, many roofers are considering these models the "new and improved" Shingle Eater. This multipurpose tool is perfect for remodeling or renovation projects. It does weigh close to 8 1/2 lbs due to the...
D handle is over 6" wide for big hands.
Availability: In Stock
Item #: 157-1048 -
Our customers are growing attached to the D handled version of our 6127 tool, and we've had multiple requests for a Demo Eater D handled. We're introducing the 8130 D handled version of the 8126 tool. They are individually made, so lengths may vary up to 1".Because of our product improvements, many roofers are considering these models the "new and improved" Shingle Eater. This multipurpose tool is perfect for remodeling or renovation projects. It does weigh close to 8 1/2 lbs due to the...
Tallest multi-purpose demo tool on the market
Availability: In Stock
Item #: 157-1043 -
8126 - Renovator 90 Tall Demo Roof Tear Off Tool8126 Large Demo Eater was recently developed to fill the gap for more serious roofing projects, as well as interior demolition. The 55" angled handle and 10" footplate make it most similar to our best-selling Shingle Eater 6126. What sets this tool apart is the footplate welded at a 90 degree angle which provides a striking/kicking surface, and footplate reinforced with welded gussets for additional prying power.Because of our product...
Tallest multi-purpose demo tool on the market
Availability: In Stock
Item #: 157-1043 -
8126 - Renovator 90 Tall Demo Roof Tear Off Tool8126 Large Demo Eater was recently developed to fill the gap for more serious roofing projects, as well as interior demolition. The 55" angled handle and 10" footplate make it most similar to our best-selling Shingle Eater 6126. What sets this tool apart is the footplate welded at a 90 degree angle which provides a striking/kicking surface, and footplate reinforced with welded gussets for additional prying power.Because of our product...