SAS Lanyards and Carabiners

Heavy Duty steel carabiner used to securely attach lifelines, lanyard, energy absorbers and other items in your fall arrest system. Zinc plated finish with twist lock gates that require two functions to open. These have a higher tensile strength rating and smaller diameter body that the aluminum carabiners. Weighs in at 8.8 ounces. Gate strength is 3,600 pounds and complies with all current ANSI regulations. Features 25kn Tensile StrengthZinc Plated SteelDouble Locking Mechanism3/4” (19mm)...

After many requests, Super Anchor developed a twin lanyard that allows workers to use the side D-rings on their harnesses for work positioning. This lanyard is specified for use as a Fall Restraint or Work Positioning device only. Do not use for Fall Arrest, vertical suspension, window-washing or rescue. We offer 6 different models all made with 3/16” wire rope, steel thimbles and connector “O” ring. All unites are hand-made in our factory in Monroe WA using state of the art swaging equipment....

After many requests, Super Anchor developed a twin lanyard that allows workers to use the side D-rings on their harnesses for work positioning. This lanyard is specified for use as a Fall Restraint or Work Positioning device only. Do not use for Fall Arrest, vertical suspension, window-washing or rescue. We offer 6 different models all made with 3/16” wire rope, steel thimbles and connector “O” ring. All units are hand-made in our factory in Monroe WA using state of the art swaging equipment....

After many requests, Super Anchor developed a twin lanyard that allows workers to use the side D-rings on their harnesses for work positioning. This lanyard is specified for use as a Fall Restraint or Work Positioning device only. Do not use for Fall Arrest, vertical suspension, window-washing or rescue. We offer 6 different models all made with 3/16” wire rope, steel thimbles and connector “O” ring. All unites are hand-made in our factory in Monroe WA using state of the art swaging equipment....

1” wide nylon webbing / 9800 lb. test Complies with all OSHA, ANSI standards

The fixed length web lanyards are specified for fall restraint use but may be used with an energy absorber for fall arrest. Manufactured at Super Anchor Safety factory in Monroe, WA USA. Product Features: 8,700lb 1.0” Nylon Webbing3,600lb gate strength connectorsNon-energy absorbingSerial NumberedPID and inspection labelInstruction ManualOSHA and ANSI Compliant

Tie-Off Straps are made from 2” wide polyester or nylon and are designed for use as temporary anchorage points to connect vertical lifelines, SRL’s, web lanyard and rope lanyards. Use on wood, steel and concrete structures. Tie-Off straps are wrapped, cinched around the structure to make for a secure anchor or can be embedded into concrete and evacuated when finished with the job. Please see the part number list below for Application, Length, Compliance and Packaging information for all our...

After many requests, Super Anchor developed a twin lanyard that allows workers to use the side D-rings on their harnesses for work positioning. This lanyard is specified for use as a Fall Restraint or Work Positioning device only. Do not use for Fall Arrest, vertical suspension, window-washing or rescue. We offer 6 different models all made with 3/16” wire rope, steel thimbles and connector “O” ring. All unites are hand-made in our factory in Monroe WA using state of the art swaging equipment....

The Energy Absorber is one of the most critical components for fall protection and is required by OSHA when workers are exposed to a free fall hazard. Designed to limit maximum arrest forces while slowing the descent, our absorbers feature patented domestic manufactured tear webbing and the highest quality connectors. MAX Force personal energy absorbers are manufactured at our factory in Monroe, WA and are ensured for component compatibility with all Super Anchor Safety Personal Protection...

Tie-Off Straps are made from 2” wide polyester or nylon and are designed for use as temporary anchorage points to connect vertical lifelines, SRL’s, web lanyard and rope lanyards. Use on wood, steel and concrete structures. Tie-Off straps are wrapped, cinched around the structure to make for a secure anchor or can be embedded into concrete and evacuated when finished with the job. Please see the part number list below for Application, Length, Compliance and Packaging information for all our...

Heavy Duty aluminum carabiner used to securely attach lifelines, lanyard, energy absorbers and other items in your fall arrest system. Super lightweight at just 5.3 ounces versus a comparable double locking snaphook at 13.8 ounces. Red anodized finish and twist lock with automatic closing mechanism. Gate strength is 3,600 pounds and complies with all current ANSI regulations. 24kn Tensile StrengthLightweight Design 5.3 ouncesRed Anodized AluminumDouble Locking Mechanism7/8” (22mm) Gate...

The Energy Absorber is one of the most critical components for fall protection and is required by OSHA when workers are exposed to a free fall hazard. Designed to limit maximum arrest forces while slowing the descent, our absorbers feature patented domestic manufactured tear webbing and the highest quality connectors. MAX Force personal energy absorbers are manufactured at our factory in Monroe, WA and are ensured for component compatibility with all Super Anchor Safety Personal Protection...

The Energy Absorber is one of the most critical components for fall protection and is required by OSHA when workers are exposed to a free fall hazard. Designed to limit maximum arrest forces while slowing the descent, our absorbers feature patented domestic manufactured tear webbing and the highest quality connectors. MAX Force personal energy absorbers are manufactured at our factory in Monroe, WA and are ensured for component compatibility with all Super Anchor Safety Personal Protection...

Our Ultra-Lite Dee Web Series is the next generation in energy absorbers and a Super Anchor Safety exclusive design. Eliminating the connector on the end of the absorber results in a more comfortable attachment and component weight is reduced nearly 50% less than standard model absorbers. Our most popular model, #6190 is fitted with a super lightweight captive aluminum carabiner for the lightest weight of any absorber we make. The Ultra-Lite attaches to the dorsal D-ring with a web loop and...

Flex Energy Absorbing Lanyards are designed to expand and contract during use. They have an internal shock absorbing component to reduce free fall forces. Ideal for use with lift equipment or stationary work areas working with lift equipment. Product Features: Lightweight expandable service length up to 6ftFall indicator and annual inspection label3,600lb (16kN) gate strength connectorsSupplied in retail box

The fixed length web lanyards are specified for fall restraint use but may be used with an energy absorber for fall arrest. Manufactured at Super Anchor Safety factory in Monroe, WA USA. Product Features: 8,700lb 1.0” Nylon Webbing3,600lb gate strength connectorsNon-energy absorbingSerial NumberedPID and inspection labelInstruction ManualOSHA and ANSI Compliant