Railing Accessories

FEDERAL OSHA 1926.502(B)(3): Guardrail system shall be capable of withstanding, without failure, a force of at least 200 pounds (890N) applied within 2 inches (5.1 cm) of the top edge, in any outward or downward direction, at any point along the top edge. PRODUCT SPECIFICATIONS: Base: Durable high strength plastic Dimensions: 8½ (L) x 5¾ (W) x 5¼ (H) FEATURES: Durable high strength plastic Pliable, yet flexible to withstand harsh job-site environments and abuse Reusable Safety orange for high...

The GuardDog Self-Closing Gate is tough, durable and easy to install. Featuring a unique self-closing design with two stainless steel torsion springs, the GuardDog industrial safety gate can open in any direction. To meet diverse application requirements, the safety gate is available in 5 nominal sizes and is adjustable laterally to 6” (-3 to +3 of the nominal size). The GuardDog Self-Closing Gate arm is dimensioned to match top- and mid-rail heights of an OSHA-compliant guardrail. When the...

The Guardian 15159 Standard Gusset mount allows for guardrail systems to be installed flush with outside walls. Guardrail posts used in combination with this gusset are compatible with bot 2 x 4 in. boards and Snap-on metal railings. The standard Gusset mount may be used in multiple installation locations if undamaged, although new fasteners must always be used with each new installation application Features: Easy to installInstalls with Screws or NailsReusableGalvanized Steel Applicable...

The Guardian Fall Protection Stair Mount is an ideal solution for the installation of guardrails on unfinished stair cases, which can be some of the most dangerous locations on a construction site. Composed of powder-coated steel for superior durability and weather resistance, the Stair Mount is suitable for installation onto both wood and concrete substrates with just 4 fasteners. Key Features:  Easy to install Lightweight and durable Install onto wood or concrete Mounts...

The Guardian Fall Protection Stair Mount is an ideal solution for the installation of guardrails on unfinished stair cases, which can be some of the most dangerous locations on a construction site. Composed of powder-coated steel for superior durability and weather resistance, the Stair Mount is suitable for installation onto both wood and concrete substrates with just 4 fasteners.Key Features: Mounts with 4 screws or nailsEngineered to be used on concrete 2,000 psi or strongerDimensions...

The LP Outrigger is used to continue a run of SafetyRail 2000 when ducting or conduit does not allow for a rail section to be used. The outrigger is placed under the object to continue the run, thus eliminating the needed outriggers when discontinuing the run. It also can be used as an outrigger when there is not enough available space for a standard rail outrigger. We do not recommend using the LP Outrigger as a standard outrigger. It creates a trip hazard and should only be used when all...

The Guardian 61027 Standard Gusset mount allows for guardrail systems to be installed flush with outside walls. Guardrail posts used in combination with this gusset are compatible with bot 2 x 4 in. boards and Snap-on metal railings. The standard Gusset mount may be used in multiple installation locations if undamaged, although new fasteners must always be used with each new installation application Features: Easy to installInstalls with Screws or NailsReusableGalvanized Steel Applicable...

The RaptorRail™ Parapet Clamp Kit is designed and built to assist in keeping your workers safe while enhancing productivity. It’s easy to setup, and works with most existing rail systems, giving them a new flexibility and usefulness. The RaptorRail™ Parapet Clamp Kit can be installed vertically or horizontally, allowing it to work on roofs, soffits, and intermediate levels. The RaptorRail™ Parapet Clamp Kit crate includes 36 parapet clamps to give the RaptorRail™ system a parapet roof...

Plastic Leveling Pad - 1/2" or 3/4" Threaded StudReplacement Pad for All-In-One Uprights

BlueWater 500023 EZ Mover for use with SafetyRail 2000 counterweight base. Constructed of light weight steel square tubing with yellow powder coat finish. The EZ Mover dolly easily attaches to the lifting hook at the center of the SafetyRail 2000 counterweight base. The EZ Mover allows one person to easily raise, transport and position the base to the desired location. Comes with two large puncture proof tires for ease of transport. EZ Mover reduces potential for back injuries. ...

Conveniently store and transport up to 120 lineal feet of safety railings, and easily move the system from one location to another. The RTC-2011 can hold (12) x 10-Foot Rail Sections, (8) x Guardrail Bases, and all accompanying hardware and components. Capable of storing/transporting various size rails and safety gate lengths for extreme versatility. Built-in large lockable storage box for toe-board brackets and locking pins/securing pins. Equipped with lifting rings for hoisting on to...

Slider Bracket for the AES Raptor All-In-One Guardrail Base Assembly. 

Tie Down's Socket Guardrail Base stands out as the lightest guardrail base in the United States, weighing just 58 lbs. Its innovative design includes base plates that nest and stack efficiently, simplifying transportation and storage. Featuring convenient toe board slots and handle holes, this base reduces the risk of soft tissue injuries during handling on the job site. It comes with the option of a galvanized finish for enhanced durability and resistance. Suitable for both permanent and...