Malco FSH2 Handle for Modular Metal Benders

Your search for a light, versatile, and modular bending tool is over: look no further than the professional-grade Metal Benders by Malco! Form 0-100° bends on straight or curved panels of any length on the jobsite, without waiting on wholesale rollformers. Metal Benders by Malco are designed or bends on flashing, roofing details, standing seam and exposed fastener metal roofing.Malco's Metal Benders are available in five single-station models:Narrow, 75mm (FS1N75)Narrow, 165mm...

The ER3 3-Station Metal Edge Roller ensures a uniform bend along the entire length of roofing material. The tool quickly adjusts for making 5/8” to 4” (15.9-102 mm) bends in 29-22 gauge (0.36-0.76 mm) steel. The center roller station of the ER3 Metal Edge Roller features a precision English/Metric depth gauge on one shaft leg that, when locked in place at desired setting, accurately aligns the depth of all roller stations. Large, comfortable adjustment knobs hold depth setting securely....

The Large Radius roller is an optional replacement 2mm roller available for users wanting a softer bend often needed for material such as copper, zinc, and even some painted materials when the finish is temperamental.  Assembly:  Remove the fasteners retaining the original 0.7mm roller and remove the roller. We recommend you store the original roller in a place where you may use it in the future for jobs requiring a smaller radius.Install the 2mm radius roller then reinstall the...

Both narrow & wide variations of Malco Modular Metal Benders may be paired with a Bender Connector for a modular experience, allowing pros to customize or "freestyle" their set-up in a one or two station configuration. These connectors are used to connect any combination of 1 station benders (both the wide and the narrow benders). Setup:  When using the connector with narrow benders, the tool may be assembled as shipped without additional steps. If the connector is used with a...