Fall Protection Distributors LLC, brings you a revolutionary product allowing Homeowners, Building Owners, and Contractors to work safely on standing seam roofs without penetrating the panels. The Standing Seam Roof Anchor (SSRA1). The patented, Non-Penetrating design of the standing seam roof anchor is unlike anything currently available. Its the only certified component system for mounting just about anything to a standing seam roof. The interchangeable mount allows for attachment of devices from various fall protection manufacturers. Can be used for Attachment of Roof Jacks, Walk Boards, SRL's, Horizontal Lifelines, Ladder Anchoring, etc...
The Standing Seam Roof Anchor SSRA1-Nylon is a next-generation tie-off point allowing homeowners, commercials building owners, and roofing contractors to work safely on standing seam metal roofs without any panel penetrations. The SSRA1-Nylon Tipped Screw Version protects standing seam profiles on 22 gauge steel and 24 gauge steel standing seam roofs.
Nylon Tipped Set Screw Standing Seam Roof Anchor Testing
An independent ISO 17025/ANSI Z359.18- certified materials testing facility recently conducted Ultimate Failure testing on the SSRA1. The 14,500 lbs. results shocked everyone and rivaled all current competitor's posted test results. The test ended when the Grade 8 top bolts sheared, leaving the aluminum anchor body completely unharmed or bent. This incredible strength is due to the patented structural design of the anchor body. The SSRA1 is in a class of its own!
Advantages Of SSRA1 - Standing Seam Fall Protection Roof Anchor
- Only 4.5 Lbs., Its the world's lightest OSHA/ANSI 5,000 lb. Certified Anchor
- Installs in minutes with Basic hand tools
- Can be used as a Temporary and Permanent Attachment
- Patented, Universal Fit design works on over 500 Standing Seam Panel Profiles without reassembly required. Fits, T-Seams, Bulb Seams, Snaplok, Single Lok, Double Lok, MR-24, etc... NO OTHER PROFILE FITS AS MANY PROFILES
- ANSI AS TM B-117 Salt Spray tested, Non corrosion aluminum and stainless steel components. Can be power coated to match any roof for permanent installations
- OSHA/ANSI tested to 5,000 lbs. in all directions of pull. Workers can access both sides of the roof without having to reposition the anchor
- Clean, low profile attachment to the seem minimizes tripping hazards and is less obstructive on permanent attachments
- Made in USA with a Lifetime Life Saving Warranty
Roof Anchor Features:
- 6061-T6 Aluminum Body-Patented Universal Fit design
- 5,000 lb. Certified D-Ring
- 12- Stainless Steel, Nylon Tipped Set Screws with 3/16" Hex/Allen bit
- Can be used as Temporary and Permanent Attachment
- Non corrosive, Aluminum Stainless Steel components
- Lifetime Life Saving Warrant