ESE Machines, #099-750 Finish Hand Seamer

Before using prepare at least 16 inches with the ESE-001 or 8 inches with the ESE-099 Features: Grade C and D compatibleGrade E is too hard and problematicNot compatible with COR-TEN or Everlast G90Roll forms a double lock seam in one passCan be converted to single lock with optional rollsWeighs only 40 lbs.Adjustable height 1" or 1-1/2"For use with painted or unpainted materialSeams 30 ft. per minuteSpring loaded swing away handleNot compatible with Schlebach or Liberty PanelNote: prepare at...

Use after first seaming with a Single Lock (First Stage) Hand SeamerDetails Double lock hand seamerForms the second stage 180 degree bendFor hard to reach placesUse to start, finish or seam the entire roofUnique leverage designLightweight and easy to useWill not scratch or peel paintFor profiles that measure 13/16″ across the topNote: before using this tool the panel must be seamed with a first stage (single lock) seamer Maximum Bending Gauges Steel : 22 gaAluminum : 0.040″Copper : 20 oz...

For Double Locking a 1/2" Wide Standing Seam Double lock hand seamerForms the 180° bendFor hard to reach placesTo start or finish (or an entire roof)Lightweight and easy to useWill not scratch or peel paintNote: before using this tool, prepare the seam with the 001 or 001C to a single lock bendMade in the USAPlease Note: Seams approximately 6" at a time. The pivot is 11" but there are reliefs on each side to allow a smooth transition between each crimpBefore Using This Tool, Prepare the Seam...

For Single Locking Profiles that Measure 13/16" Across the Top Single lock hand seamerForms the 90 degree bendFor hard to reach placesTo start or finish (or an entire roof)Lightweight and easy to useWill not scratch or peel paintCan be used on profiles that measure 13/16" across the topFor a double lock, pair with ESE 099-812 Finish Hand SeamerMade in the USAPlease Note: Seams approximately 6" at a time. The pivot is 10" but there are reliefs on each side to allow a smooth transition between...