Connectors + Plugs

Replacement regulator 1/4" Left-Hand fittings 30-60 PSI

Features: 50mm Standard Nozzle500,000 BTU2" diameter

250 P.S.I. (1.7) MPA Max. LP-Gas  19,000 BTU/HR. NAT. Gas Includes: 5LPN Socket (1) & 5LP Plug (1)

FEATURESThis soft-nose P.O.L. connector incorporates an excess flow safety device and hand-wheel for easy, positive tightening. A flow rate of 1.8 gallons per minute. Use to connect LP-Cylinders to regulators, hoses and other fittings. Great for use with torches, fish cookers, larger construction heaters and moreNot for use with gas grills and other low pressure devices. U.L. Listed.  No wrenches needed with this soft nose P.O.L. It is all brass and can be...

Features  This brass set allows connection and disconnection of the LPGas line to the torch without the use of tools. The unique design of the HK-7 set makes coupling under pressure possible with minimal loss of fuel. Both pieces are 1/4” pipe thread (HN-5 female & HN-6 male). For use up to 250 PSI.The HK-8 set Includes: 2 male connectors and 1 female connector, so you can switch between 2 propane torches(or other equipment) quickly and easily. For example, hook up your weeding...

The V-334 is a heavy duty, all brass needle valve tested to 350 P.S.I. It incorporates a thumb wheel for easy open or close. Inlet (female) and outlet(male) are 1/4” standard pipe thread. Designed for superior durability & performance, The 1/4" standard pipe thread is equipped with both inlets - a female end & outlet Male end. FEATURES Measures 1/4"Female end and outlet male endDurable designFeatures incorporated thumb wheel ...

This standard P.O.L. connector threads into nearly all propane/butane cylinders to connect to regulators, hoses and other fittings. This is a straight through flow design. The P-1685 adapts most LP cylinders to regulators and other fittings. The P.O.L. nut is the left hand fitting that threads into nearly all vapor butane/propane cylinders and the opposite end is standard 1/4” MPT. (No excess flow feature.) Replacement P.O.L. for Red Dragon Modified Bitumen Applicators.FeaturesNo excess...

Liquid Propane Hose with 9/16" Left-Hand Swivel Nuts on Each End

Sievert #3015-04 has a 1/4 inch inner diameter with high pressure propane grade. It allows operation of small sievert torches using disposable propane bottles.This stand-up kit allows the roofer to quickly and consistently embed granules without kneeling. This tool is efficient and a real back saver. Remove the EBT-00 for use as a torch.

LP Hose Socket (Quick Connect) Female Thread 1/4"

LP Hose FittingMale Pipe Thread 1/4"

These regulators work to control the pressure from the fuel contained in high-pressure cylinders to torches for oxy-fuel cutting, heating, and welding applications. Adjustable Regulator, Maximum Gauge Outlet Pressure 4,000 psig, Number of Stages Single Stage, Compatible Gas Type Propane, Inlet Connection Type POL, Inlet Connection Gender Female, Inlet Connection Size 0.885 In.-14, Outlet Pressure (Maximum) 60 psig, Outlet Connection Gender Male, Outlet Connection Size 9/16 In.-18, Outlet...

LP Hose Plug2-Way Shut Off1/4"

1/4” FPT x 1/4” FPT HEX COUPLING

A rugged steel cased gauge showing pressures from 0-100 PSI. The 1/4” male pipe stem allows it to be mounted on the 567 RC, 567 RD and R-499 regulators. Dial diameter is two inches.

The P.O.L connection with integral excess flow check valve offers an idea safety device for us on Red Dragon Roofing Torches, tar and asphalt burners and similar heating appications where portable LPG cylinders are used. The P.O.L. inlet end attached directly to the outlet of the vaport cylinder valve while the outlet end is 1/4" MPT. Replacement P.O.L for the RT Basic Torch Kit. Features Excess flow safety deviceHex nut for positive tighteningFlow rate of 1.8 gallons per minuteUse to connect...

ET-20 & ET-4 TORCH EXTENSIONS The ET-20 is 18” overall and is the standard tube connecting the valve to the torch head on all RT 21/2-20 torches. Connects with 1/4” MPT on each end. Comes complete with a TB-4 Torch Stand.The ET-4 is a 4” tube and is standard on all RT 11/2-10 torches. Connects with 1/4” MPT on each end. Comes complete with a TB-4 Torch Stand.