Debris Chute Systems

This flat section is an inexpensive alternative to molded chute sections. While durability and length of life are short, when lightweight construction and short use is needed, these flat chutes are a economical alternative. Each section comes with chains, bolts, flat washers and nuts. Ensures that your debris lands where you want it to Light weight, high density polyethylene is weather proof and extremely durable for years of trouble free use. Stores and ships flat, then easily assembled using...

Welded steel hopper stands up to punishment and provides 42” x 42” depository (shipping weight 200 lbs.)

REPLACEMENT PART for the winch picking bar for all DURACHUTE™ winches. For use when a DURACHUTE Winch is not being used 4,000 lbs. Maximum Load Weight: 13 lbs.Dims: 33 x 4 x 1 in

Protective Liners are clipped to the inside of plastic debris chute sections and add an additional layer of thickness to the section, which extends the life of the chute section itself. It is used when particular heavy debris may be thrown, when there may be slight bends in the chute system which creates a specific area of impact, or if sharp-edged objects may be disposed down the chute. The protective liners are made of the same high quality. HDPE plastic material as our sections and come...

The patented DURAFLAT™ Converter is used to attach the DURAFLAT™ Flat Chute Sections to any of DURACHUTE’s™ outriggers via the Basic Support Frame. The converter comes complete with all necessary chains, hooks, nuts and bolts. It is 36″ in diameter.Converts the two chain attachment from the Intake Hopper to a three chain attachment for use with the plastic folding chutes.Weight: 46 lb.Dims: 36 x 36 x 5 in

Hopper retainer bars are added to the intake hopper when used in intermediate positions. The retainer bar allows other sections to sleeve into the intake hopper safely. The galvanized bar comes complete with four 5/16″ bolts, washers and locknuts. Add to Intake Hopper When Used in Intermediate Positions Includes Four (4) 5/16” Bolts, Four (4) Washers and Four (4) Locknuts Weight: 2 lb. Dims: 21 x 32 x 1 in ...

When job site conditions require containment of dust particles due to building occupancy or confined areas, DURACHUTE’s™ Dust Gaiters provide additional debris containment. Dust gaiters simply slip on, between chute sections, to stop small dust and other particles from escaping from between the sections. Used to Help Contain Dust Particles in Confined Areas and Occupied Buildings Fits Between Sections Weight: 1 lbs. ...

Features: Come complete with operator safety fence Easy to set up; provides a safe holding system for trash hopper and chutesComes complete with 12 counterweights Hopper and trash chute sections are not included and are sold separately Maximum number of trash chutes allowed for the system: 16 Sections * Hopper and Trash Chutes Sold Separately *

DURACHUTE’s™ safety flap can be added, using the included bolts, washers and locknuts, to the hopper retainer bar. The flap stops debris from exiting the chute at intermediate intake locations. The flap comes pre-drilled with 3 bolts, washers and locknuts for quick and easy attachment to the hopper retainer bar. Add to Intake Hopper When Used in Intermediate Positions Includes Three (3) 5/16” Bolts, Three (3) Washers and Three (3) Locknuts Weight: 10 lbDims: 32 x 37 x 1 in  ...

DURACHUTE’s™ new In-House Manual Winch adds an additional level of safety, reducing chute installers need to reach ”out of house” to grasp the winch crank when raising or lowering the chute. Safe and easy to both assemble and use, the manual winch easily installs the DURACHUTE™ debris chute system. Available in both 150′ and 80′ lengths.The winch consists of winch roller bar, winch frame, winch, support arm, winch picking bar, five 5/8″ bolts and 2 frame support brackets with caps.Winch Roller...

50' Chute Kit Counter Weights(50 lbs) - Item # 441-0320, QTY: 13 Sections (Chutes)(37 lbs) - Item # 441-0300, QTY: 17 Basic Support Frame(69 lbs) - Item # 441-0310, QTY: 1 Intake Hopper(63 lbs) - Item # 441-0301, QTY: 1 Winch 80'(71 lbs) - Item # 441-0321, QTY: 1Choose Outrigger based on Roof Type Total Weight: 1,482 lbs (without Outrigger) 80' Chute Kit Counter Weights(50 lbs) - Item # 441-0320, QTY: 16 Sections (Chutes)(37 lbs) - Item # 441-0300, QTY: 27 Basic Support Frame(69 lbs)...